Deformation behavior and microstructure evolution of nickel-based superalloys fabricated by selective laser melting
Source abstract
Abstract
In this study, the thermal deformation behavior of GH3230 alloy fabricated by selective laser melting (SLM) was investigated for the first time by isothermal hot compression tests in the temperature range of 850∼1150 °C and the strain rate range of 0.01∼1 s -1 . The influence of different thermal deformation parameters on the high-temperature rheological behavior of GH3230 alloy was investigated, and the constitutive equation and thermal processing map were established according to the rheological stress. The microstructure evolution and dynamic recrystallization (DRX) behavior of GH3230 after thermal deformation were investigated. The results showed that the flow stress decreased with the increase of temperature and the decrease of strain rate. The relationship between the flow stress, strain rate and deformation temperature of GH3230 alloy was suitable for the hyperbolic sine equation. When the strain was 0.7, the activation energy value of the GH3230 alloy's thermal deformation was 505.44246 KJ mol -1 , and the prediction correlation coefficient of the strain-compensated Arrhenius constitutive model was all above 0.99. Dynamic precipitation and DRX occurred in the hot deformation zone, and dynamic precipitation preceded DRX. With the temperature increasing from 850 °C to 1150 °C, the DRX mechanism changed from discontinuous dynamic recyclizations (DDRX) to continuous dynamic recrystallization (CDRX). It was mainly due to the change of dislocation motion behavior with the increase of deformation temperature. This study presents for the first time the thermal deformation behavior of GH3230 formed SLM and discovers the mechanism transition from DDRX→CDRX. This study will provide guidance for the actual industrial application of SLM-formed GH3230 alloy.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Effect of laser lower and remelting on the microstructure and tribological properties of GH3230 superalloy coating fabricated by laser melting deposition10.1016/j.jmapro.2024.10.071 ↗
2. Effect of ultrasonic shot peening on microstructure and mechanical properties of GH3230 superalloy during selective laser melt solution heat treatment
3. Review and research prospects on additive manufacturing technology for agricultural manufacturing10.3390/agriculture14081207 ↗
4. Evaluation of A laser scanning sensor in detection of complex-shaped targets for variable-rate sprayer development10.13031/trans.59.11760 ↗
5. Enhancing acid production of Acetobacter pasteurianus by laser and intense pulsed light mutagenesis and its molecular mechanism based on transcriptomic analysis10.1016/j.lwt.2023.114803 ↗
6. Evaluation and experiment of flight parameter quality of the plant protection UAV based on laser tracker10.3390/agriculture11070628 ↗
7. Combined effects of heat treatment and TiB2 content on the high-temperature tensile performance of TiB2-modified Ni-based GH3230 alloy processed by laser powder bed fusion10.1016/j.msea.2022.144379 ↗
8. Investigation of an experimental laser sensor-guided spray control system for greenhouse variable-rate applications10.13031/trans.13366 ↗
9. Effects of ultrasonic shot peening process on the microstructure and mechanical properties of nickel-based superalloys formed by selective laser melting10.1016/j.jmatprotec.2024.118667 ↗
10. Microstructural evolution and mechanical properties of Ni-based superalloy joints brazed using a ternary Ni-W-B amorphous brazing filler metal10.1016/j.jallcom.2023.170663 ↗
11. Influence of the TiB2 content on the processability, microstructure and high-temperature tensile performance of a Ni-based superalloy by laser powder bed fusion10.1016/j.jallcom.2022.164656 ↗
12. Precipitation, transformation, and coarsening of carbides in a high-carbon Ni-based superalloy during selective laser melting and hot isostatic pressing processes10.1016/j.jallcom.2022.165196 ↗
13. Effect of hot isostatic pressing and heat treatment on the evolution of precipitated phase and mechanical properties of GH3230 superalloy fabricated via selective laser melting10.1016/j.jmrt.2024.03.058 ↗
14. Strength-plasticity transition mechanism after the solution treatment of GH3230 superalloy fabricated via laser powder bed fusion10.1016/j.msea.2023.145124 ↗
15. Correspondence between low-energy twin boundary density and thermal-plastic deformation parameters in nickel-based superalloy10.1016/S1003-6326(21)65508-5 ↗
16. Effect of strain rate on hot deformation characteristics of GH690 superalloy10.1016/S1003-6326(17)60082-7 ↗
17. Dynamic recrystallization mechanisms and twining evolution during hot deformation of inconel 71810.1016/j.msea.2016.09.100 ↗
18. Hot deformation characteristics and dynamic recrystallization mechanisms of a co-ni-based superalloy10.1016/j.msea.2020.139638 ↗
19. A systematic study on thermo-mechanical behavior, processing maps and recrystallization mechanism of Incoloy825 superalloy during hot compression10.1016/j.jmrt.2024.01.042 ↗
20. Tailoring the microstructure and deformation mechanisms of an additively manufactured nickel-based superalloy by post-aging heat treatment10.1016/j.vacuum.2024.113238 ↗
21. Combined effects of carbon content and heat treatment on the high-temperature tensile performance of modified IN738 alloy processed by laser powder bed fusion10.1016/j.msea.2024.147538 ↗
22. Investigation of cracking mechanism and yield strength associated with scanning strategy for an additively manufactured nickel-based superalloy10.1016/j.jallcom.2022.168532 ↗
23. Effects of solution treatment on the microstructural evolution and tensile properties of GH 3230 superalloy manufactured by laser melting deposition10.1016/j.matchar.2022.112339 ↗
24. Effect of TiB2 content on microstructure and mechanical properties of GH3536 superalloy formed by laser solid forming
25. Dynamic mechanical behaviour and dislocation substructure evolution of Inconel 718 over wide temperature range10.1016/j.msea.2011.04.079 ↗
26. Necklace formation during dynamic recrystallization of 5182 aluminium alloy under isothermal compression10.4028/www.scientific.net/MSF.812.167 ↗
27. Constitutive modeling of dynamic flow behavior of Ti-5553 alloy10.1016/j.jallcom.2019.02.101 ↗
28. Effect of strain rate upon plastic flow of steel10.1063/1.1707363 ↗
29. Effect of strain rate on microstructure evolution of a nickel-based superalloy during hot deformation10.1016/j.matdes.2015.05.004 ↗
30. Study on the dynamic recrystallization mechanisms tailored by dislocation substructures of a coarse grained Co-free nickel-based superalloy10.1016/j.matchar.2023.112961 ↗
31. Influence of processing parameters on dynamic recrystallization and the associated annealing twin boundary evolution in a nickel base superalloy10.1016/j.msea.2017.05.109 ↗
32. Flow behavior and microstructures of superalloy 718 during high temperature deformation10.1016/j.msea.2008.07.046 ↗
33. Abnormal dynamic recrystallization behavior of a nickel based superalloy during hot deformation10.1016/j.jallcom.2019.02.055 ↗
34. The microstructure evolution and nucleation mechanisms of dynamic recrystallization in hot-deformed Inconel 625 superalloy10.1016/j.matdes.2010.07.040 ↗
35. Hot compression deformation and constitutive modeling of GH4698 alloy10.1016/j.matdes.2014.08.045 ↗
36. EBSD study of a hot deformed nickel-based superalloy10.1016/j.jallcom.2015.04.008 ↗
37. Microstructure evolution and dynamic recrystallisation behaviour in hot deformation of Haynes 214 superalloy10.1016/j.jallcom.2022.165755 ↗
38. Evolution of microstructure and twin density during thermomechanical processing in a γ-γ’ nickel-based superalloy10.1016/j.actamat.2012.06.028 ↗
39. Microstructure evolution during dynamic recrystallization of hot deformed superalloy 71810.1016/j.msea.2007.09.008 ↗
40. Hot deformation and recrystallization behavior of a new nickel-base superalloy for ultra-supercritical applications10.1016/j.jmrt.2022.06.141 ↗
41. Hot workability and microstructure control in Monel®400 (Ni–30Cu) alloy: an approach using processing map, constitutive equation and deformation modeling10.1016/j.msea.2021.141855 ↗
42. Metadynamic recrystallization behaviors of SA508Gr.4N reactor pressure vessel steel during hot compressive deformation10.1007/s42243-020-00410-3 ↗
43. Modeling of dynamic material behavior in hot deformation: forging of Ti-624210.1007/BF02664902 ↗
44. Hot deformation behavior and microstructural evolution of 2205 duplex stainless steel10.1088/2053-1591/ab8529 ↗
45. Hot deformation behavior and microstructural evolution of antibacterial austenitic stainless steel containing 3.60% Cu10.1007/s11665-018-3274-1 ↗
46. Hot deformation of alumina-forming austenitic steel: EBSD study and flow behavior10.1007/s10853-019-03513-9 ↗
47. Transition of dynamic recrystallization mechanism during hot deformation of Incoloy 028 alloy10.1016/j.jmst.2019.08.058 ↗
48. Microstructure and microtexture evolution of dynamic recrystallization during hot deformation of a nickel-based superalloy10.1016/j.matdes.2019.108429 ↗
49. Microstructure evolution during dynamic recrystallization of hot deformed superalloy 71810.1016/j.msea.2007.09.008 ↗
50. Hot deformation and constitutive model of as-cast Ni-Cr-Co nickel-base alloy10.1515/ijmr-2021-8716 ↗