Ferritic layers formation mechanism during oxidation of FeMnSiCrNi alloys: Effect of temperature and influence on oxidation behavior
Source abstract
Abstract
Ferritic layer formation occurs after oxidation in Mn-rich austenitic alloys. It has significant effects on high-temperature oxidation resistance, but a better understanding of its formation is needed to control these effects. Thus, two FeMnSiCrNi alloys were exposed to six temperatures between 675 and 800 °C for 100 h. A relationship between mass variation and ferrite thickness was revealed, as Mn and Cr depletion occurred due to the Mn 2 O 3 /MnCr 2 O 4 formation. Thermodynamic calculated phase diagrams indicated ferrite stability at high temperatures, affecting oxidation resistance. Finally, the Mn concentration profile changes during oxidation were studied with DICTRA analyses to explain the ferritic layer growth. By describing the growth and characteristics of this layer, the study can serve as a starting point for future investigations into designing more oxidation-resistant FeMnSiCrNi alloys.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Reconciling viability and cost-effective shape memory alloy options – a review of copper and iron based shape memory metallic systems
2. Effects of alloying additions on Fe-Mn-Si shape memory alloys10.2355/isijinternational.30.674 ↗
3. Oxidation behavior of an austenitic stainless FeMnSiCrNi shape memory alloy10.1016/j.corsci.2012.09.029 ↗
4. High temperature cyclic oxidation behavior of a low manganese Fe12Mn9Cr5Si4Ni-NbC shape memory stainless steels10.1016/j.jallcom.2020.158198 ↗
5. Kinetics oxidation and characterization of cyclically oxidized layers at high temperatures for FeMnSiCrNiCe and FeSiCrNi alloys10.1590/1980-5373-mr-2017-0098 ↗
6. Insights into high-temperature oxidation of Fe-Mn-Si-Cr-Ni shape memory stainless steels and its relationship to alloy chemical composition
7. The oxidation of Fe-19.6Cr-15.1Mn stainless steel10.1007/BF00751800 ↗
8. The oxidation of Iron-Chromium-Manganese alloys at 900°C10.1007/BF00938460 ↗
9. Effects of silicon and manganese content on the oxidation behavior of FeMnSiCrNi alloys and the correlation between Mn-depleted zone, surface roughness and oxidation resistance10.1016/j.corsci.2021.109724 ↗
10. Microstructure and surface oxidation behavior of an austenitic Fe-Mn-Si-Cr-Ni-Co shape memory stainless steel at 800 °C in air10.1016/j.corsci.2019.108103 ↗
11. FeMnSiCrNi oxidation at 800 °C: mechanism and characterization of improved oxidation resistance generated by vacuum annealing treatment10.1007/s11085-021-10038-7 ↗
12. Metal/oxide interface roughness evolution mechanism of an FeMnSiCrNiCe shape memory stainless steel under high temperature oxidation10.1016/j.corsci.2019.108228 ↗
13. Anomalous cyclic oxidation behaviour of an Fe-Mn-Si-Cr-Ni alloy - a finite element analysis10.1016/j.corsci.2018.11.018 ↗
14. Influence of temperature on the oxidation behaviour of an austenitic stainless FeMnSiCrNi shape memory alloy10.1007/s11085-019-09916-y ↗
15. The effect of Mn-depleted surface layer on the corrosion resistance of shape memory Fe-Mn-Si-Cr alloys10.1007/s11661-997-0287-z ↗
16. High temperature oxidation resistance improvement in an FeMnSiCrNi alloy by Mn-depletion under vacuum annealing10.1016/j.matlet.2019.01.074 ↗
17. Initial stages of FeMnSiCrNi shape memory stainless steels oxidation mechanism at 800 °C10.1016/j.corsci.2021.109255 ↗
18. Critical evaluation and thermodynamic modeling of the Mn–Cr–O system for the oxidation of SOFC interconnect10.1016/j.ssi.2006.01.012 ↗
19. The diffusion of chromium in a duplex alloy steel10.1179/030634576790431859 ↗