Microstructure refinement mechanism upon deeply undercooled solidification of a Ni88Cu6Co6 alloy
Source abstract
Abstract
Applying molten glass purification and cyclic superheat methods, deep undercooling treatment was performed on a Ni88Cu6Co6 alloy system. The alloy was undercooled to an undercooling as high as 300 K and the corresponding microstructure characteristics were analyzed systematically. Compared with the Ni88Cu12 system, the addition of a minor amount of Co had a pronounced impact on the grain refinement mechanism of Ni88Cu6Co6 system. Grain refinement observed at low undercooling was attributed to the dendritic melting mechanism. On the other hand, in the high undercooling region, the recrystallization process played a dominant role in refining the microstructure. Through the present analysis, the characteristic undercoolings of microstructure evolution had been determined. In addition, BCT model was applied to study the free growth of an undercooled Ni88Cu12 alloy, and by comparing Ni88Cu12 and Ni88Cu6Co6 alloys, we aimed to find the effect of Co on the microstructure refinement mechanisms of deeply undercooled Ni–Cu alloys.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Solidification and crystal growth phenomena · Metallic Glasses and Amorphous Alloys · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. From Classical thermodynamics to phase-field method10.1016/j.pmatsci.2021.100868 ↗
2. Phase transformations in an ultralight BCC Mg alloy during anisothermal ageing10.1016/j.actamat.2022.118248 ↗
3. Stability of phase boundary between L12-Ni3Al phases: a phase field study10.1016/j.intermet.2022.107528 ↗
4. Role of interfacial energy anisotropy in dendrite orientation in Al-Zn alloys: a phase field study10.1016/j.matdes.2022.110555 ↗
5. Rapid solidification of non-stoichiometric intermetallic compounds: modeling and experimental verification10.1016/j.actamat.2018.01.040 ↗
6. Application of the thermodynamic extremal principle to diffusion-controlled phase transformations in Fe-C-X alloys: modeling and applications10.1016/j.actamat.2018.08.008 ↗
7. Phase-field simulation for the evolution of solid/liquid interface front in directional solidification process10.1016/j.jmst.2018.12.009 ↗
8. Role of interfacial energy anisotropy in dendrite orientation in Al-Zn alloys: a phase field study10.1016/j.matdes.2022.110555 ↗
9. Kurz · 1998 · 1∼292
10. Mathematical modeling of transport during alloy solidification10.1115/1.3120318 ↗
11. Modelling of microstructure of formation in solidification process10.1179/imr.1989.34.1.93 ↗
12. Nonequilibrium solidification of undercooled metallic melts10.1016/0927-796X(94)90011-6 ↗
13. The growth velocity-undercooling relationship of highly undercooled Ni and Ni-Cu melts10.1080/02670836.2019.1594553 ↗
14. Grain refinement and the stability of dendrites growing into undercooled pure metals and alloys10.1063/1.365740 ↗
15. High undercooling and rapid solidification of Ni-32.5%Sn eutectic alloy10.1016/0956-7151(91)90212-J ↗
16. The effect of experimental variables on the levels of melt undercooling10.1016/j.msea.2003.10.050 ↗
17. Recrystallization mechanism of grain refinement in hypercooled single phase alloys10.1016/j.jcrysgro.2013.05.016 ↗
18. Evolution of solidification microstructure in undercooled Co80Pd20alloys10.1179/1743284712Y.0000000055 ↗
19. The effect of undercooling on growth velocity and microstructure of Ni95Cu5 alloys10.1016/j.jcrysgro.2019.02.051 ↗
20. Directional solidification of undercooled melt
21. Mechanism of establishment of cast microstructure during solidification of highly undercooled melts10.1016/0022-0248(76)90132-9 ↗
22. Structural evolution of undercooled Ni-Cu alloys10.1016/S0022-0248(98)00399-6 ↗
23. Grain refinement in undercooled copper
24. The undercooling of silver
25. Grain refinement induced by a critical crystal growth velocity in undercooled melts10.1063/1.103289 ↗
26. Boettinger · 1988 · 13∼18
27. Evidence of recrystallization mechanism of grain refinement in hypercooled Co80Pd20 alloys10.1016/j.matlet.2012.04.042 ↗
28. Grain refinement in the solidification of undercooled Ni–Pd alloys10.1016/j.jcrysgro.2007.09.005 ↗
29. Local nonequilibrium effect on rapid dendrite growth in a binary alloy melt10.1016/S0375-9601(97)00562-8 ↗
30. Modelling the fluid flow induced stress and collappse in a dentritic network10.1007/s11663-999-0058-x ↗
31. Crystal growth resultant from recrystallization upon annealing rapid solidification microstructures of deeply undercooled single phase alloys quenched before recalescence10.1021/cg500176t ↗
32. Observation of recrystallization upon annealing rapidly solidified microstructures of highly undercooled Ni80Cu20 alloys10.1016/j.jallcom.2014.01.228 ↗
33. Recrystallization and twinning in rapidly solidified Nickel based alloys without man-made plastic deformation10.1016/j.jallcom.2014.06.099 ↗
34. Mechanism selection for spontaneous grain refinement in undercooled metallic melts10.1016/j.actamat.2014.05.043 ↗
35. Modelling the fluid flow induced stress and collappse in a dentritic network10.1007/s11663-999-0058-x ↗
36. Effect of bulk undercooling on microstructure transition mechanism of rapidly solidified Nickel alloys
37. Observation of dendrite growth velocity and microstructure transition in highly undercooled single phase alloys
38. Grain size gradient naturally prepared through recrystallization in rapidly solidified undercooled alloy melts10.3139/146.111648 ↗
39. Investigation on recalescence temperatures of deeply undercooled melts10.1016/j.jcrysgro.2016.09.016 ↗
40. Growth velocity-undercooling relationship and structure refinement mechanism of undercooled Ni-Cu alloys10.1016/j.jallcom.2018.09.228 ↗
41. Microstructure evolution and grain refinement mechanism of rapidly solidified single-phase copper based alloys10.1016/j.jmst.2022.04.025 ↗
42. Effect of undercooling on microstructure evolution of Cu based alloys10.1016/j.jallcom.2022.167998 ↗
43. Investigation of microstructure evolution and mechanical properties of near-eutectic Fe2-yCoNiCryCx high entropy cast iron10.1016/j.intermet.2022.107805 ↗
44. Design and microstructural development of a new eutectic Fe-Co-Ni-B multi-principal element alloy system10.1016/j.jallcom.2021.163205 ↗