Study on intermediate annealing process of thermal mechanical treatment of 7185 alloy with two stage deformation
Source abstract
Abstract
This study investigated the effect of intermediate annealing (IA) during a special thermo-mechanical treatment on the microstructure and properties of 7185 Al alloy. The results show that after IA, many sub-structures are formed in the alloy and many particles are precipitated. The particle size increases and the width of the dislocation wall becomes narrower with increasing IA time and temperature. After the second stage of deformation, the dislocations are ordered again and generate micro shear bands (MSBs). The final T6 treated alloy under IA2 process (holding time for 40 min at 400°C) has good plasticity and corrosion resistance. The tensile strength is 523 MPa, the yield strength is 458 MPa, the elongation is 17.6%, the depth of intergranular corrosion layer is 15.6 μm, and the corrosion grade after 6 and 12 h exfoliation corrosion is N, PC.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Microstructural and mechanical characterisation of Al-Zn-Mg-Cu alloy processed by multi-directional cryo-forging10.1016/j.matpr.2021.02.709 ↗
2. Effect of solution treatment temperature on grain boundary composition and environmental hydrogen embrittlement of an Al-Zn-Mg-Cu alloy10.1016/j.vacuum.2020.109937 ↗
3. Progress in structural materials for aerospace systems10.1016/j.actamat.2003.08.023 ↗
4. Effect of one-step and two-step homogenization treatments on distribution of Al3Zr dispersoids in commercial AA7150 aluminum alloy10.1016/S1003-6326(11)61512-4 ↗
5. Effect of heat treatment on microstructure, hardness and corrosion resistance of 7075 Al alloys fabricated by SLM10.1016/j.jmapro.2020.10.071 ↗
6. A short review on aluminium alloys and welding in structural applications10.1016/j.matpr.2021.01.447 ↗
7. Effects of rotary-die ECAP routes on microstructure and mechanical property of AZ31 magnesium alloy10.3724/SP.J.1037.2009.00434 ↗
8. Grain boundary character distributions of lead alloy annealed at elevated temperature after rolled at different temperatures
9. Grain refinement in 7075 aluminum by thermomechanical processing10.1007/BF02642340 ↗
10. The effect of ingot processing treatments on the grain size and properties of Al alloy 707510.1007/BF02644652 ↗
11. Effect of pre-deformation on microstructure and mechanical properties of 2219 aluminum alloy sheet by thermomechanical treatment10.1016/S1003-6326(12)61733-6 ↗
12. Effect of strain-induced precipitation on microstructures and fatigue properties of AA 7050 alloy
13. Mechanical performance improvement of Al-Cu-Mg using various thermomechanical treatments10.1016/j.msea.2022.142869 ↗
14. Effect of Ag and Cu addition on the strength and electrical conductivity of Al-Mg-Si alloys using conventional and modified thermomechanical treatments10.1016/j.jallcom.2022.165242 ↗
15. Effect of heating rate during solution treatment on microstructure, mechanical property and corrosion resistance of high-strength AA 7075 alloy10.1016/j.matchar.2020.110535 ↗
16. Effect of heat treatment on microstructure, hardness and corrosion resistance of 7075 Al alloys fabricated by SLM10.1016/j.jmapro.2020.10.071 ↗
17. Achieving excellent corrosion resistance properties of 7075 Al alloy via ultrasonic surface rolling treatment10.1016/j.jallcom.2022.165009 ↗
18. Recrystallization and microstructure evolution of hot extruded 7075 aluminum alloy during semi-solid isothermal treatment10.1016/j.matchar.2019.109874 ↗
19. Effects of step-quench and aging on mechanical properties and resistance to stress corrosion cracking of 7050 aluminum alloy10.2320/matertrans1989.41.783 ↗
20. Effect of second-phase particle evolution in a twin-roll-casted Al-Mg-Si alloy on recrystallization texture and mechanical anisotropy10.1016/j.matchar.2021.111038 ↗
21. Interesting phenomena for Al-Zn-Mg aluminum alloy after two years of storage: a comparative study on microstructure, mechanical properties and corrosion behavior of aluminum alloy with different aging treatments10.1016/j.conbuildmat.2020.122210 ↗
22. The effects of Cu, Zn and Zr on the solution temperature and quenching sensitivity of Al-Zn-Mg-Cu alloys10.1016/j.matchemphys.2020.122853 ↗
23. Integrated physically based modeling for the multiple static softening mechanisms following multi-stage hot deformation in Al-Zn-Mg-Cu alloys10.1016/j.ijplas.2020.102809 ↗
24. Effect of Ag and Cu addition on the strength and electrical conductivity of Al-Mg-Si alloys using conventional and modified thermomechanical treatments10.1016/j.jallcom.2022.165242 ↗
25. Mechanical performance improvement of Al-Cu-Mg using various thermomechanical treatments10.1016/j.msea.2022.142869 ↗
26. Good combination of strength and corrosion resistance in an Al-Cu-Mg alloy processed by a short-cycled thermomechanical treatment10.1016/j.matchar.2021.111469 ↗
27. Enhanced plasticity and corrosion resistance of high strength Al-Zn-Mg-Cu alloy processed by an improved thermomechanical processing10.1016/j.jallcom.2017.05.047 ↗
28. Precipitates and the evolution of grain structures during double-step rolling of high-strength aluminum alloy and related properties
29. Effect of deformation induced precipitation on dynamic aging process and improvement of mechanical/corrosion properties AA7055 aluminum alloy10.1016/j.jallcom.2017.03.091 ↗
30. Effect of a special thermo-mechanical treatment process on microstructure and properties of 7185 alloy10.1016/j.jallcom.2022.168072 ↗
31. Investigation on microstructure and mechanical properties of Al-Zn-Mg-Cu alloys with various Zn/Mg ratios10.1016/j.jmst.2020.12.045 ↗
32. Fine precipitation scenarios of AlZnMg(Cu) alloys revealed by advanced atomic-resolution electron microscopy study Part I: structure determination of the precipitates in AlZnMg(Cu) alloys10.1016/j.matchar.2014.11.028 ↗
33. Evolution mechanism of microstructure and bond strength based on interface diffusion and IMCs of Ti/steel clad plates fabricated by double-layered hot rolling10.1016/j.jmatprotec.2022.117780 ↗
34. Effects of Mg contents on microstructures and second phases of as-cast Al-Zn-Mg-Cu alloys10.1016/j.jmrt.2022.10.050 ↗
35. Early-stage clustering and precipitation behavior in the age-hardened Al–Mg–Zn(-Cu) alloys10.1016/j.msea.2022.144015 ↗
36. Evolution of precipitate and precipitate/matrix interface in Al-Zn-Mg-Cu (-Ag) alloys10.1016/j.jmst.2022.07.049 ↗
37. The mechanism of grain refinement and plasticity enhancement by an improved thermomechanical treatment of 7055 Al alloy10.1016/j.msea.2017.06.106 ↗
38. Effect of Cu content and Zn/Mg ratio on microstructure and mechanical properties of Al-Zn-Mg-Cu alloys10.1016/j.jmrt.2022.06.059 ↗
39. Influence of predeformation and ageing of an Al-Zn-Mg alloy-II. Modeling of precipitation kinetics and yield stress10.1016/S1359-6454(98)00296-1 ↗
40. Structure-property correlations in Al 7050 and Al 7055 high-strength aluminum alloys10.1016/j.msea.2007.05.116 ↗
41. Overview no. 102 Theory assisted design of high strength low alloy aluminum10.1016/0956-7151(93)90334-O ↗
42. Enhanced strength and ductility in Al-Zn-Mg-Cu alloys fabricated by laser powder bed fusion using a synergistic grain-refining strategy10.1016/j.jmst.2021.12.078 ↗
43. Mechanical properties, corrosion behaviors and microstructures of 7075 aluminium alloy with various aging treatments10.1016/S1003-6326(08)60130-2 ↗
44. Influence of alloy composition and heat treatment on precipitate composition in Al-Zn-Mg-Cu alloys10.1016/j.actamat.2009.09.003 ↗
45. Mathematical modelling of exfoliation corrosion in high strength aluminium alloys10.1016/0010-938X(82)90013-0 ↗
46. 1992
47. 2001