Functionalization of titanium dental prostheses surface with antimicrobials GO and Cu2O
Source abstract
Abstract
One of the causes of the failure of dental implants is bone loss due to bacterial infiltration. To minimize this problem, biofilm adhesion on the abutments must be avoided to improve soft tissue sealing. The present work aimed the functionalization of titanium abutment surface with antimicrobials graphene oxide and copper oxide. The samples were divided into 4 groups: G1 (Cu2O coating); G2 (GO coating); G3 (GO + Cu2O coating) and G4 (no coating). They were characterized by Scanning Electron Microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, roughness, and wettability. Bacterial viability on the abutment surface was also investigated using a qualitative live/dead assay. After surface functionalization, all groups had adequate roughness values for soft tissue sealing, less than 0,4 μm. G1 samples had the lowest wettability (2.16 ± 6.23 mJ/m2). The surface of G2 samples had the largest number of dead bacteria (226.334 AU/42.38%). The roughness of G3 (0.094 ± 0.018 μm) had the most similarity to that of natural teeth (0.099 μm). G4 samples had the highest wettability (38.57 ± 10.51 mJ/m2) and allowed the greatest adherence of S. mutans strains (399.056 AU/32.10%).
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Graphene and Nanomaterials Applications · Bone Tissue Engineering Materials · Dental materials and restorations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Biomedical application of titanium and its alloys
2. Epidemiologia e Microbiologia da Peri-implantite
3. Response of soft tissue to different abutment materials with different surface topographies: a review of the literature
4. Simplificação da prótese dentária digital e selamento da mucosa peri-implantar: perio one base concept
5. Infecções peri-implante
6. Zafar · 2020
7. Inhibition of initial bacterial adhesion on titanium surfaces by lactoferrin coating10.1116/1.4867415 ↗
8. Infiltração bacteriana Na interface implante/abutment: considerações ao implantodontista
9. Lima · 2014
10. Diseño nanotecnológico de superficies con propiedades antibacterianas: el grafeno
11. Produção e caracterização de filmes finos transparentes e condutores de óxido de grafeno reduzido
12. Surface treatment of titanium used in implant prosthesis supported with copper oxide nanoparticles
13. Titanium coated with graphene and niobium pentoxide for biomaterial applications
14. Nanometric deposition of fluoride ions on titanium alloys and its influence on in vitro bacterial adhesion and viability10.1590/1980-5373-mr-2021-0147 ↗
15. Antimicrobial activity of metal oxide nanoparticles against gram-positive and gram-negative bacteria: a comparative study
16. Destructive extraction of phospholipids from Escherichia coli membranes by graphene nanosheets10.1038/nnano.2013.125 ↗
17. Synthesis, characterization, and antibacterial activity of polyindole/Ag-CuO nanocomposites by reflux condensation method10.1080/03602559.2017.1410832 ↗
18. Cu/Cu2O/CuO nanoparticles: novel synthesis by exploding wire technique and extensive characterization10.1016/j.apsusc.2016.09.005 ↗
19. Electrodeposition and characterization of Cu2O thin films using sodium thiosulfate as an additive for photovoltaic solar cells10.1016/j.cjche.2017.06.023 ↗
20. A comparative study of nanostructures of CuO/Cu2O fabricated via potentiostatic and galvanostatic anodization
21. Estudo do Filme de Grafeno/Óxido de Grafeno Obtido por Redução Química Parcial do Óxido de Grafite
22. Rota química para produção de óxido de grafeno a partir de oxidação do grafite comercial
23. Structural, FTIR and photoluminescence studies of Cu doped ZnO nanopowders by co-precipitation method10.1016/j.optmat.2012.06.004 ↗
24. Use of FTIR spectroscopy for the measurement of Co2 carbon stable isotope ratios
25. Leal · 2016
26. Síntese e caracterização de óxido de grafeno para uso em capacitor eletroquímico10.51891/rease.v7i7.1670 ↗
27. Comparação de óxido de grafeno e óxido de grafeno reduzido por DRX, MEV e espectroscopia Raman
28. Factors affecting the success of dental implants
29. Dental implant prosthetic abutment surface treatment to improve gingival adhesion
30. Mucosite peri-implante e peri-implantite
31. Brito · 2021
32. Comparison of the surface roughness of dental implant abutment and tooth root
33. Lima · 2003 · 353
34. Mozafari · 2020
35. Evaluation of roughness, wettability, and morphology of an yttria-stabilized tetragonal zirconia polycrystal ceramic after different airborne-particle abrasion protocols10.1016/j.prosdent.2014.07.005 ↗
36. Análise dos mecanismos celulares durante a osseointegração dos implantes
37. Wettability of substrata controls cell–substrate and cell–cell adhesions10.1016/j.bbagen.2007.07.008 ↗
38. Biochemical and immunological differences between hydrophobic and hydrophilic strains of streptococcus mutans. Infection and immunity
39. Graphene oxide loaded with copper oxide nanoparticles as an antibacterial agent against pseudomonas syringae pv. tomato
40. Titanium in medicine