Microtensile and Weibull analyses of direct metal laser sintered Ti–6Al–4V with process parameter induced defects
Source abstract
Abstract
Direct metal laser sintered Ti–6Al–4V samples, with intentionally induced defects generated by varying the process parameters, were analyzed using microtensile testing techniques. Samples with defects exhibited statistically-significant larger microtensile than macrotensile ultimate strengths. Weibull microtensile moduli are smaller than macrotensile moduli indicating greater variability. Comparing the microtensile results to macrotensile properties reveals how changing these process parameters affects the range of mechanical behaviors potentially present in additively-manufactured parts due to the varying microstructures in the material.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Additive manufacturing of Ti6Al4V alloy: a review10.1016/j.matdes.2018.107552 ↗
2. Overview of materials qualification needs for metal additive manufacturing
3. Prediction of lack-of-fusion porosity for powder bed fusion
4. Keyhole-induced porosities in laser-based powder bed fusion (L-PBF) of Ti6Al4V: high-fidelity modelling and experimental validation
5. Analysis of defect generation in Ti–6Al–4V parts made using powder bed fusion additive manufacturing processes
6. Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting10.1016/j.matdes.2016.05.070 ↗
7. Study of keyhole-porosities in selective laser melting using X-ray computed tomography
8. XCT analysis of the influence of melt strategies on defect population in Ti-6Al-4V components manufactured by selective electron beam melting10.1016/j.matchar.2015.02.008 ↗
9. Synchrotron-Based X-ray microtomography characterization of the effect of processing variables on porosity formation in laser power-bed additive manufacturing of Ti-6Al-4V
10. Effects of defects on mechanical properties in metal additive manufacturing: a review focusing on X-ray tomography insights10.1016/j.matdes.2019.108385 ↗
11. Influence of defects on mechanical properties of Ti–6Al–4 V components produced by selective laser melting and electron beam melting10.1016/j.matdes.2015.07.147 ↗
12. Uncovering the coupled impact of defect morphology and microstructure on the tensile behavior of Ti-6Al-4V fabricated via laser powder bed fusion10.1016/j.jmatprotec.2021.117113 ↗
13. Microtensile characterization of titanium 5111 alloy properties and comparison of failure mechanisms at two microstructural length scales10.1016/j.matdes.2019.108081 ↗
14. Fiji: an open-source platform for biological-image analysis10.1038/nmeth.2019 ↗
15. Strength modeling using Weibull distributions10.1007/s12206-008-0426-5 ↗
16. Three-parameter vs. two-parameter Weibull distribution for pultruded composite material properties10.1016/S0263-8223(02)00158-7 ↗
17. Weibull modulus estimated by the non-linear least squares method: a solution to deviation occurring in traditional Weibull estimation10.1007/s11661-017-4294-4 ↗
18. EOS file “eos_ti64_9011-0014_9011-0039_m290_mds_11-17_en.pdf” downloaded from https://www.eos.info/03_system-related-assets/material-related-contents/metal-materials-and-examples/metal-material-datasheet/titan/ti64/eos_ti64_9011-0014_9011-0039_m290_mds_11-17_en.pdf . February, 2022.
19. A mesoscale simulation of multiaxial yield in GASAR porous copper10.1016/S0921-5093(98)00560-7 ↗
20. Fracture behaviour of notched as-built EBM parts: characterization and interplay between defects and notch strengthening behavior10.1016/j.tafmec.2018.10.004 ↗