Structural optimization and heat-fluid-solid simulation of a graded corundum-calcium hexaluminate purging plug by a multi-objective genetic algorithm approach
Source abstract
Abstract
The purging plug is essential for enhancing production efficiency in molten steel refining, yet it faces challenges related to structural integrity due to its lifespan often not aligning with the ladle's repair cycle. This study introduces a novel corundum-calcium hexaluminate purging plug with gradual holes designed to alleviate internal stress concentration. Utilizing a multi-objective optimization model and fluid-solid coupling heat transfer method, the impact of structural parameters on thermal and mechanical properties was systematically investigated. The numerical simulation results indicate that increasing the number of gradient layers positively impacts temperature distribution. Notably, the D-210 (1.0 mm diameter) aperture reduces the stress gradient Δ σ max by 648.06 MPa compared to D-212 (1.2 mm diameter) at the Y = 0.313 m section. Additionally, variation in inclination angle impacts tensile stress σ t and shear stress τ , an inclination angle of 6° (α6) reduces maximum tensile stress by 211.41 MPa compared to an angle of 0° (α0).
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Advanced ceramic materials synthesis · Iron and Steelmaking Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Current situation of carbon emissions and countermeasures in China's ironmaking industry10.1007/s12613-023-2632-7 ↗
2. Vibrations analysis of bubble evolution in liquids of varying physical properties10.1007/s11663-023-02953-8 ↗
3. Numerical modeling of multiphase flow in gas stirred ladles: from a multiscale point of view10.1016/j.powtec.2020.06.028 ↗
4. Numerical modelling studies of flow and mixing phenomena in gas stirred steel ladles10.1179/174328107X167940 ↗
5. Numerical Investigations on thermomechanical behaviour of purging plug with rectangular and circular slits10.2355/isijinternational.ISIJINT-2020-048 ↗
6. Inverse simulation of fracture parameters for cement-bonded corundum refractories
7. A new approach for the study of slag-metal interface in steelmaking10.1179/174328106X94735 ↗
8. Effects of cement content on the microstructural evolution and mechanical properties of cement-bonded corundum castables10.1016/j.ceramint.2019.10.193 ↗
9. Investigation of fracture behavior of cement-bonded corundum castables using wedge splitting test and digital image correlation method10.1016/j.jeurceramsoc.2019.11.081 ↗
10. Mixing models for slag covered, argon stirred ladles10.2355/isijinternational.50.1117 ↗
11. Revisiting the single-phase flow model for liquid steel ladle stirred by gas10.1016/j.apm.2018.11.005 ↗
12. Numerical simulations of inclusion behavior and mixing phenomena in gas-stirred ladles with different arrangement of tuyeres10.2355/isijinternational.54.9 ↗
13. Multiphase modeling of bottom-stirred ladle for prediction of slag-steel interface and estimation of desulfurization behavior10.1007/s11663-016-0620-2 ↗
14. Modeling energy dissipation in slag-covered steel baths in steelmaking ladles10.1007/s11663-010-9389-x ↗
15. Slag eye formation in single and dual bottom purged industrial steelmaking ladles10.1080/00084433.2020.1715697 ↗
16. Automatic detection of slag eye area based on a hue-saturation-value image segmentation algorithm
17. Numerical simulation of the multiphase flow in the Rheinsahl–Heraeus (RH) system10.1007/s11663-009-9300-9 ↗
18. Modeling of transient two-phase flow in a continuous casting mold using Euler-Euler large eddy simulation scheme10.2355/isijinternational.53.484 ↗
19. Phase-field simulation for the evolution of solid/liquid interface front in directional solidification process10.1016/j.jmst.2018.12.009 ↗
20. Development of porous refractory ceramic plugs: will the next generation be 3D printed?10.1016/j.ceramint.2021.06.045 ↗
21. Regulation of the interface compatibility of the 3D-printing interpenetration networks toward reduced structure anisotropy and enhanced performances10.1021/acsami.3c06514 ↗
22. Physical modeling evaluation on refining effects of ladle with different purging plug designs10.1002/srin.201900606 ↗
23. Structural optimization and design of purging plug for improving its service performance
24. Modification and experimental research on vortex tube10.1016/j.ijrefrig.2007.01.013 ↗
25. An experimental investigation of the optimum geometry for the cold end orifice of a vortex tube10.1016/j.applthermaleng.2008.03.032 ↗
26. Erosion and penetration rates of a pipe protruded in a sudden contraction10.1016/j.compfluid.2007.05.002 ↗
27. Experimental study of energy separation in a Ranque-Hilsch tube with a screw vortex generator10.1016/j.ijrefrig.2021.02.014 ↗
28. The influence of working gas characteristics on energy separation of vortex tube10.1016/j.applthermaleng.2013.07.027 ↗
29. An experimental study on the effect of the valve angle of counter-flow Ranque–Hilsch vortex tubes on thermal energy separation10.1016/j.expthermflusci.2010.02.013 ↗
30. Experimental modeling of vortex tube refrigerator10.1016/S1359-4311(03)00146-7 ↗
31. Analysis of fluid flow characteristics in reducer based on FLUENT
32. A numerical analysis investigation to optimize the performance of the Ranque-Hilsch Vortex tube by changing the internal tapering angle10.1016/j.ijft.2023.100467 ↗
33. Optimization on the performance of ground heat exchangers for GSHP using Kriging model based on MOGA10.1016/j.applthermaleng.2017.02.114 ↗
34. Energy and cost optimization of shell and tube heat exchanger with helical baffles using Kriging metamodel based on MOGA10.1016/j.ijheatmasstransfer.2016.02.084 ↗
35. Optimization investigation on configuration parameters of serrated fin in plate-fin heat exchanger using genetic algorithm10.1016/j.ijthermalsci.2015.10.024 ↗
36. Optimization of laser welding process parameters of stainless steel 316L using FEM, Kriging and NSGA-II10.1016/j.advengsoft.2016.06.006 ↗
37. Parameters optimization of hybrid fiber laser-arc butt welding on 316L stainless steel using Kriging model and GA10.1016/j.optlastec.2016.04.001 ↗
38. A multi-objective design optimization strategy for vertical ground heat exchangers10.1016/j.enbuild.2014.11.024 ↗
39. Numerical investigation on thermomechanical behavior of alumina–calcium hexaluminate refractories for purging plug10.1007/s42243-023-00996-4 ↗
40. Numerical analysis of the irreversible behavior of corundum castable purging plugs during service
41. Parameters optimization of a vertical ground heat exchanger based on response surface methodology10.1016/j.enbuild.2011.01.007 ↗
42. Vibration analysis of hydropower house based on fluid-structure coupling numerical method
43. Thermomechanical analysis of purging plugs by applying fluid–solid conjugate heat transfer modeling10.1002/srin.201900213 ↗
44. Microstructural evolution and thermal shock resistance mechanism of calcium magnesium aluminate (CMA) aggregate in alumina castables
45. Thermo-poroelastic AVO modeling of Olkaria geothermal reservoirs10.1016/j.geoen.2024.213166 ↗
46. Unsteady conjugate heat transfer simulation of wall heat loads for rotating detonation combustor10.1016/j.ijheatmasstransfer.2023.125081 ↗