Oxidation behavior of fully dense TiAl-based composites with a controlled laminated microstructure
Source abstract
Abstract
A novel laminated TiAl matrix composite (LMC) consisting of alternating equiaxed grain layers (EGLs) and fully lamellar grain layers (FGLs) has been fabricated successfully by hot pressing of alternating Ti/Al–6Si foils and subsequent multi-step reaction annealing. The oxidation behavior of the LMC at 800 °C was studied. The results show that the oxide scale is formed with typical multilayer structure after oxidized at 800 °C for 100 h. The oxidation behavior is different between EGLs and FGLs while the thickness of oxide scale is almost identical, suggesting an isotropy oxidation resistance of the LMC. Si addition effectively enhances the oxidation resistance of the LMC.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced ceramic materials synthesis · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Recent progress in the developmentof gamma titanium aluminide alloys10.1002/1527-2648(200011)2:11<699::AID-ADEM699>3.0.CO;2-J ↗
2. Deformation behavior of brittle/ductile multilayered composites under interface constraint effect10.1016/j.ijplas.2016.11.005 ↗
3. Isothermal oxidation of TiAl alloy10.1007/s11661-001-0209-4 ↗
4. Processing and mechanical behavior of laminated titanium–titanium tri-aluminide (Ti–Al3Ti) composites10.1016/j.msea.2005.06.067 ↗
5. Decoupling the contributions of constituent layers to the strength and ductility of a multi-layered steel10.1016/j.actamat.2016.09.007 ↗
6. An overview of tailoring strain delocalization for strength-ductility synergy10.1016/j.pmatsci.2020.100675 ↗
7. Temperature-dependent reversed fracture behavior of multilayered TiBw/Ti-Ti(Al) composites10.1016/j.ijplas.2021.102998 ↗
8. Effect of silicon on the oxidation resistance of 9 wt.% Cr heat resistance steels in 550 °C lead-bismuth eutectic10.1016/j.corsci.2016.04.020 ↗
9. The individual effects of niobium and silicon on the oxidation behaviour of Ti3Al based alloys10.1016/S0966-9795(99)00062-X ↗
10. High-temperature oxidation behavior of multi-phase Mo-containing γ-TiAl-based alloys10.1016/j.intermet.2014.04.010 ↗
11. Precipitation strengthening in K5-series -TiAl alloyed with silicon and carbon10.1007/s11661-003-0277-8 ↗
12. Oxidation behavior of binary Ti-Al Alloys in high temperature air enviroment10.2320/matertrans1989.34.236 ↗
13. The influence of cooling rate during alloy casting on the oxidation behavior of TiAI-based intermetallics10.1007/BF00365194 ↗
14. The effect of microstructure on the oxidation behavior of tial-based intermetallics10.1016/0010-938X(93)90276-M ↗
15. High temperature oxidation behaviour of a TiAl–Al2O3 intermetallic matrix composite10.1016/j.corsci.2003.10.026 ↗
16. Effect of silicon and niobium on oxidation resistance of TiAl intermetallics10.1016/0921-5093(92)90256-Z ↗
17. (S)TEM study of different stages of Ti–45Al–8Nb–0.2W–0.2B–0.02Y alloy oxidation at 900°C10.1016/j.corsci.2007.11.013 ↗
18. Fundamentals of TiAl oxidation - a critical review10.1002/maco.19950460503 ↗
19. Thermodynamic aspects of TiAl and TiSi2 oxidation: the Al-Ti-O and Si-Ti-O Phase diagrams10.1007/BF00666500 ↗
20. Development and microstructure of the Al-depleted layer of oxidized TiAl10.1002/maco.19970480105 ↗
21. Formation of Z-Ti50Al30O20 in the sub-oxide zones of γ-TiAl-based alloys during oxidation at 1000°C10.1016/S1359-6454(99)00169-X ↗
22. Improvement of cyclic oxidation resistance of Y-containing TiAl-based alloys with equiaxial gamma microstructures10.1016/j.intermet.2005.01.014 ↗
23. Effects of Nb and Si on high temperature oxidation of TiAl10.1016/S1003-6326(08)60090-4 ↗
24. High-temperature oxidation of Ti–Al–Si alloys prepared by powder metallurgy10.1016/j.jallcom.2019.151895 ↗