Enhanced interfacial joining strength of joined high chromium gray cast iron/low carbon steel joint via graphite coating
Source abstract
Abstract
Liquid-state bonding is one of the most crucial methods in joining dissimilar materials to manufacture composites with structural design. The high chromium gray cast iron (HCGCI)/low carbon steel (LCS) composite structure is attractive in mining industries due to its superior mechanical properties and low density. However, the decarburization of the faying surface of HCGCI leads to the formation of a coarse-grained brittle interlayer between HCGCI and LCS which seriously deteriorates the mechanical properties of welded joints. In this work, high chromium gray cast iron/low carbon steel composite was fabricated by diffusion bonding via graphite coating layer. The results showed that the graphite coating on the fusion surfaces prevented the decarburization of HCGCI and the growth of coarse grains which improved the bonding quality. The ultimate tensile strength and total elongation of the graphite-free sample are 335.6 MPa and 8.9%, respectively. In contrast, the ultimate tensile strength and total elongation of the graphite-contain sample are 435.6 MPa and 17.9%, separately. This work opens a new strategy for fabricating high chromium gray cast iron/low carbon steel composite, and the flexibility to achieve complex structures through liquid-state bonding is extended.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Abnormal erosion–slurry velocity relationship of high chromium cast iron with high carbon concentrations10.1016/j.wear.2011.01.087 ↗
2. Interfacial reactions in white iron/steel composites10.1016/j.jmatprotec.2012.06.025 ↗
3. Diffusion phenomena between alloy steel and gray cast iron in layered bimetallic casting
4. Microstructural and wear investigation of high chromium white cast iron hardfacing alloys deposited on carbon steel10.1016/j.jallcom.2020.157472 ↗
5. An investigation on microstructure evolution and mechanical properties during liquid state diffusion bonding of Al2024 to Ti–6Al–4V10.1016/j.matchar.2014.10.018 ↗
6. Strengthening mechanisms of TiAl/Ti2AlNb diffusion bonding joint after post-bonded heat treatment and hot deformation10.1016/j.msea.2021.141872 ↗
7. Microstructure and mechanical response of dissimilar joint of ferritic interstitial-free steel to austenitic low-density steel produced by diffusion bonding10.1016/j.msea.2022.144020 ↗
8. Vacuum diffusion bonding between equiatomic CoCrNi-based concentrated solid solution alloys system and 316 stainless steel by spark plasma sintering10.1016/j.msea.2023.145297 ↗
9. In-depth microscopic characterisation of the weld faying interface revealing stress-induced metallurgical transformations during friction stir spot welding10.1016/j.ijmachtools.2021.103716 ↗
10. In-depth understanding of material flow behavior and refinement mechanism during bobbin tool friction stir welding10.1016/j.ijmachtools.2021.103816 ↗
11. Fabrication of high chromium cast iron/low carbon steel composite material by cast and hot rolling process10.1016/j.matdes.2010.01.014 ↗
12. Influence of diffusion bonding pressure on microstructural features and strength performance of dissimilar Ti–6Al–4V alloy and AISI 304 steel joints developed using copper interlayer10.1115/1.4062443 ↗
13. Multicriteria optimization, sensitivity analysis, and prediction of bond characteristics of vacuum diffusion bonded aero engine Ti6Al4V alloy joints
14. Diffusion bonding of titanium and AA 7075 aluminum alloy dissimilar 350 joints—process modeling and optimization using desirability approach10.1007/s00170-015-8223-7 ↗
15. Effects of temperature and strain rate on microstructure and mechanical properties of high chromium cast iron/low carbon steel bimetal prepared by hot diffusion-compression bonding10.1016/j.matdes.2014.06.067 ↗
16. S. Peijian, L. Runguang, L. Yi, W. Yuebo, Z. Yunbo, R. Weili, S. Zhe, Z. Tianxiang, P. Jianchao, L.J.S. Xue, Hierarchical crack buffering triples ductility in eutectic herringbone high-entropy alloys, 373(6557) 912-918.10.1126/science.abf6986 ↗
17. Mechanical behavior and microstructure of hypereutectic high chromium cast iron: the combined effects of tungsten, manganese and molybdenum additions10.1016/j.jmrt.2020.03.098 ↗
18. Microstructure evolution and mechanical properties of eutectoid steel with ultrafine or fine (ferrite+cementite) structure10.1016/j.msea.2014.01.037 ↗
19. M7C3: the story of a misunderstood carbide10.1016/j.actamat.2022.117985 ↗
20. Microstructure and mechanical properties of millimeter WC particle-reinforced high-chromium cast iron composites10.1007/s11665-019-04491-4 ↗
21. Effects of carbon balance and heat treatment on hardness and volume fraction of retained austenite of semi-multi-alloyed white cast iron10.1007/s40962-019-00343-y ↗
22. Microstructure and crystallography of M7C3 carbide in chromium cast iron10.1016/j.matchemphys.2015.05.008 ↗
23. Analysis of evolution law and mechanism of stacking fault density of M7C3 carbides under the action of the electric current pulse10.1016/j.matchar.2022.112117 ↗
24. Formation mechanism of stacking faults and its effect on hardness in M7C3 carbides10.1016/j.matchar.2020.110691 ↗
25. Strain hardening in Fe–16Mn–10Al–0.86C–5Ni high specific strength steel10.1016/j.actamat.2016.02.044 ↗
26. Relationship between microstructure and yield strength for plain carbon steel with ultrafine or fine (ferrite+cementite) structure10.1016/j.msea.2014.08.050 ↗
27. Plastic deformation behaviors and hardening mechanism of M7C3 carbide10.1016/j.msea.2016.03.062 ↗
28. Effect of cerium addition on microstructure and mechanical properties of high-strength Fe85Cr4Mo8V2C1 cast steel10.1016/j.msea.2016.07.114 ↗
29. Effect of La2O3 on granular bainite microstructure and wear resistance of hardfacing layer metal10.1016/S1002-0721(14)60036-3 ↗
30. Effects of RE La on microstructure and hardness of low carbon high niobium steel in deformed condition
31. Grain refinement in lightweight advanced high-strength steel castings10.1007/s40962-016-0048-0 ↗