Hot deformation behavior of recycled-Be/2024Al composites prepared by pressure infiltration method
Source abstract
Abstract
It is necessary to confirm the appropriate processing parameters for recycled-Be/2024Al composites before hot processing. Therefore, hot compression experiments were conducted on 40 and 50 vol% recycled-Be/2024Al composites prepared by pressure infiltration method. Meanwhile, the constitutive equations were established. The activation energy increased with the volume fraction of reinforcement, which means the increasing difficulty for composites to deform. However, different from ceramic reinforcements, Be is able to deform with matrix coordinately. This characteristic makes recycled-Be/2024Al composites more prone to deformation than ceramic reinforced Al composites with the same volume fraction of reinforcements. The processing maps of 40 and 50 vol% recycled-Be/2024Al composites have been drawn, and the appropriate processing parameters for 40 and 50 vol% recycled-Be/2024Al composites were determined as 495–525 °C,0.0006–0.0016 s−1 and 500–530 °C,0.016–0.04 s−1, respectively. The microstructures of samples hot compressed with various parameters were observed to identify the accuracy of processing maps.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Applications of an aluminum–beryllium composite for structural aerospace components10.1016/j.engfailanal.2004.02.002 ↗
2. New technologies for optical systems utilizing aluminum beryllium
3. Beryllium-aluminum alloys for investment castings
4. New trends in powder processing beryllium-containing alloys10.1007/s11837-000-0031-2 ↗
5. Design and fabrication of a lightweight laser scanning mirror from metal-matrix composites10.1117/12.447290 ↗
6. Advances in beryllium and AlBeMet optical materials
7. Recycling of beryllium swarf for the preparation of Be/Al composites with high mechanical properties by pressure infiltration method10.1016/j.jmrt.2024.02.121 ↗
8. Effect of interfacial strength on mechanical behavior of Be/2024Al composites by pressure infiltration10.3390/ma16020752 ↗
9. Pressure effects on flow and fracture of Be-Al alloys10.1007/s11661-002-0343-7 ↗
10. Study on effect of hot extrusion on microstructure and properties of Be-Al alloy
11. Evaluation of the tensile and fatigue behaviour of ingot metallurgy beryllium/aluminium alloys10.1023/A:1018677102160 ↗
12. Achieving ultra-high strength in Be/Al composites by self-exhaust pressure infiltration and hot extrusion process10.1016/j.msea.2022.144473 ↗
13. Effects of processing conditions and test temperature on fatigue crack growth and fracture toughness of Be–Al metal matrix composites10.1016/S0921-5093(02)00391-X ↗
14. Hot deformation behavior and microstructure evolution of Be/2024Al composites, International Journal of Minerals10.1007/s12613-023-2662-1 ↗
15. Hot deformation behaviors and processing maps of B4C/Al6061 neutron absorber composites10.1016/j.matchar.2016.12.014 ↗
16. Hot deformation behavior and microstructure evolution of flaky Ti3AlC2 particles reinforced pure Al composite10.1016/j.jallcom.2022.167118 ↗
17. Hot deformation behavior of in situ nano ZrB2 reinforced 2024Al matrix composite10.1016/j.compscitech.2015.05.006 ↗
18. Revealing the ultra-high high-temperature compressive mechanical properties and deformation mechanism of a heterostructured AlNp/Al nanocomposite10.1016/j.msea.2023.145199 ↗
19. Analysis of hot deformation behavior of Al 5083-TiC nanocomposite using constitutive and dynamic material models10.1016/j.matdes.2011.12.049 ↗
20. Hot deformation and processing maps of Al2O3/Al composites fabricated by flake powder metallurgy10.1016/S1003-6326(15)63698-6 ↗
21. Hot deformation and processing maps of Al-15%B4C composites containing Sc and Zr10.1007/s11665-017-2622-x ↗
22. Effects of Gd addition on the hot deformation behaviors of B4Cp/Al6061 neutron absorber composites10.1007/s11661-023-06993-2 ↗
23. Hot deformation behaviour of SiC/AA6061 composites prepared by spark plasma sintering10.1016/j.jmst.2015.12.006 ↗
24. Design and fabrication of a nanoamorphous interface layer in B4C/Al composites to improve hot deformability and corrosion resistance10.1021/acsanm.0c00932 ↗
25. Hot deformation behavior of the AA6016 matrix composite reinforced with in situ ZrB2 and Al2O3 nanoparticles10.1088/2053-1591/ab6e34 ↗
26. Constitutive modeling for predicting high-temperature flow behavior in aluminum 5083+10 wt Pct SiCp composite10.1007/s11663-019-01531-1 ↗
27. Hot deformation behavior and microstructural evolution of particulate-reinforced AA6061/B4C composite during compression at elevated temperature10.1016/j.msea.2017.03.013 ↗
28. A correlation between tensile flow stress and Zener-Hollomon factor in TiAl alloys at high temperatures10.1023/A:1006723629430 ↗
29. Effect of strain rate upon plastic flow of steel10.1063/1.1707363 ↗
30. On the mechanism of hot deformation10.1016/0001-6160(66)90207-0 ↗
31. Characterization of hot deformation behavior of as-cast TC21 titanium alloy using processing map10.1016/j.msea.2010.11.015 ↗
32. Forming behavior and workability of 6061/B4Cp composite during hot deformation10.1016/j.compscitech.2011.02.009 ↗
33. High temperature deformation behavior of Al 2124-SiCp composite10.1016/S0924-0136(96)02653-2 ↗
34. Hot deformation mechanisms in a 10-vol-percent Al2O3 particle-reinforced 6061-Al matrix composite10.1016/0956-716X(95)00123-D ↗
35. Deformation behaviour and microstructure of a 20% Al2O3 reinforced 6061Al composite10.1007/BF02481398 ↗
36. Hot deformation behavior and microstructural evolution of an in situ 2 wt.% TiB2-reinforced 6061 Al matrix composite10.1007/s11665-023-08226-4 ↗
37. Hot deformation behavior and strain-compensated constitutive equation of nano-sized SiC particle-reinforced Al-Si matrix composites10.3390/ma13081812 ↗
38. On the hot working characteristics of 6061Al-SiC and 6061-Al2O3 particulate reinforced metal matrix composites10.1016/S0266-3538(02)00197-5 ↗