Atomic-scale insights into precipitates and their interfacial properties in CuCrZr alloys induced by cryogenic treatment
Source abstract
Abstract
In this study, high-resolution TEM was utilized to provide a detailed characterization of the precipitates in CuCrZr alloys induced by cryogenic treatment. Building on these findings, first-principles computational models were developed to investigate the mechanical properties of various precipitates and their interfacial bonding characteristics with the matrix. The results demonstrated that cryogenic treatment generated two submicron-sized secondary phases in the matrix: pure Cr particles with a BCC structure and Cu5Zr particles with an FCC structure. Additionally, we observed that nano-sized pure Cr particles were dispersed throughout the matrix and exhibited an orientation relationship of (−111) Cu//(0–11) Cr and [0–11] Cu//[−1−1-1] Cr. First-principles calculations revealed that all the above precipitates exhibited higher modulus and hardness compared to the matrix, with Cr particles being particularly notable. Additionally, the adhesion strength of the Cr/Cu interface was exceptional, surpassing that of the fully coherent CuSlab and CuTwin. Furthermore, the analysis of the electronic properties of the interface revealed that the strengthening effect could be attributed to the higher charge density and localized nature of the Cr atoms near the interface. In summary, precipitates with high hardness and strong adhesion to the matrix can more effectively hinder dislocation movement, which is crucial for enhancing the mechanical properties of the alloys.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and mechanical properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. A study on the mechanical and electrical properties of high-strength CuCrZr alloy fabricated using laser powder bed fusion10.1016/j.jallcom.2022.166627 ↗
2. Additively manufactured CuCrZr alloy: microstructure, mechanical properties and machinability10.1016/j.msea.2021.141528 ↗
3. Clustering, nano-scale precipitation and strengthening of steels10.1016/j.pmatsci.2020.100764 ↗
4. Effect of heat treatment on the microstructure and properties of CuCrZr alloy manufactured by wire arc additive manufacturing10.1016/j.jallcom.2023.171786 ↗
5. The current state of CuCrZr and CuCrNb alloys manufactured by additive manufacturing: a review10.1016/j.matdes.2022.111419 ↗
6. Correlation between microstructure and mechanical properties in the age-hardenable Cu-Cr-Zr alloy10.1016/j.jnucmat.2020.152775 ↗
7. Orientation relationships between precipitates and matrix and their crystallographic transformation in a Cu–Cr–Zr alloy10.1016/j.msea.2022.143576 ↗
8. Application of advanced experimental techniques to elucidate the strengthening mechanisms operating in microalloyed ferritic steels with interphase precipitation10.1016/j.actamat.2020.10.014 ↗
9. Coarsening mechanism of T1 precipitation and calculation of T1/Al interface properties in 2198 Al–Cu–Li alloys: experimental and DFT studies10.1016/j.vacuum.2022.111333 ↗
10. Consideration of particle-strengthening mechanism of copper-precipitation-strengthened steels by atom probe tomography analysis10.1016/j.msea.2011.12.056 ↗
11. Atomic-scale investigation of the interface precipitation in a TiB2 nanoparticles reinforced Al–Zn–Mg–Cu matrix composite10.1016/j.actamat.2019.11.068 ↗
12. The bulk and interfacial structures of the η (Al2Au) precipitate phase10.1016/j.actamat.2015.12.035 ↗
13. Microstructural and wear resistance evolution of Alx (TiVZr) 100-x lightweight high-entropy alloys10.1016/j.triboint.2024.109585 ↗
14. Low-temperature martensitic transformation in tool steels in relation to their deep cryogenic treatment10.1016/j.actamat.2012.11.045 ↗
15. Effect of deep cryogenic treatment on microstructures and performances of aluminum alloys: a review10.1016/j.jmrt.2023.08.140 ↗
16. Effects of cryogenic treatment on microstructure and mechanical properties of AZ31 magnesium alloy rolled at different paths10.1016/j.msea.2021.142475 ↗
17. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
18. Generalized gradient approximation for the exchange-correlation hole of a many-electron system10.1103/PhysRevB.54.16533 ↗
19. Special points for Brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
20. Nanoscale Cu particle evolution and its impact on the mechanical properties and strengthening mechanism in precipitation-hardening stainless steel10.1016/j.matchar.2022.111885 ↗
21. Interaction of irradiation defects with precipitates in CuCrZr and Cu-1Fe alloys10.1016/j.actamat.2023.118964 ↗
22. Different effects of body-centered cubic and face-centered cubic chromium precipitations on mechanical properties and wear resistance of Cu-Cr-Zr alloy10.1007/s11665-022-07016-8 ↗
23. Effect mechanism of cryogenic treatment on ferroalloy and nonferrous alloy and their weldments: a review
24. Effect of deep cryogenic treatment on the microstructure and tensile property of Mg-9Gd-4Y–2Zn-0.5 Zr alloy10.1016/j.jmrt.2021.11.137 ↗
25. Microstructure evolution and mechanical/physical properties of 25# valve alloys steel subjected to deep cryogenic treatment10.1016/j.vacuum.2018.11.056 ↗
26. Evolution of twinning and shear bands in magnesium alloys during rolling at room and cryogenic temperature10.1016/j.matdes.2020.108793 ↗
27. Effects of twin-twin interactions and deformation bands on the nucleation of recrystallization in AZ31 magnesium alloy10.1016/j.matdes.2020.108936 ↗
28. Cooperative effect of strength and ductility processed by thermomechanical treatment for Cu–Al–Ni alloy10.1016/j.msea.2022.143485 ↗
29. Lattice parameters, densities, expansion coefficients and perfection of structure of Cu and of Cu–In α phase10.1107/S0567739469001549 ↗
30. The Cr-Cu (chromium-copper) system10.1007/BF02868727 ↗
31. Mechanical properties and chemical bonding of the Os–B system: a first-principles study10.1016/j.actamat.2012.04.015 ↗
32. Crystal structure and mechanical properties of nickel–cobalt alloys with different compositions: a first-principles study10.1016/j.jpcs.2019.109194 ↗
33. The stability and elastic properties of NaCl-type MN (M= Ti, V, Zr, Nb, and Ta) compounds investigated by first principles10.1007/s10853-012-7132-5 ↗
34. Modeling hardness of polycrystalline materials and bulk metallic glasses10.1016/j.intermet.2011.03.026 ↗
35. Theoretical predictions of structure and related properties of intermetallics10.1179/mst.1992.8.4.345 ↗
36. Effects of phonons on mobility of dislocations and dislocation arrays10.1016/j.scriptamat.2017.04.033 ↗
37. Numerical investigations of helical dislocations based on coupled glide-climb model10.1016/j.ijplas.2017.02.015 ↗
38. Precipitation and micromechanical behavior of the coherent ordered nanoprecipitation strengthened Al-Cr-Fe-Ni-V high entropy alloy10.1016/j.actamat.2021.117121 ↗
39. Synergy of multiple precipitate/matrix interface structures for a heat resistant high-strength Al alloy10.1038/s41467-023-38730-z ↗
40. Insight into the elastic, electronic properties, anisotropy in elasticity of Manganese Borides10.1016/j.vacuum.2019.04.014 ↗
41. Universal elastic anisotropy index10.1103/PhysRevLett.101.055504 ↗
42. Ni Al (110)∕ Cr (110) interface: a density functional theory study10.1103/PhysRevB.73.205421 ↗
43. Classification of chemical bonds based on topological analysis of electron localization functions10.1038/371683a0 ↗