Diamond turning on nitriding diffusion layer of pure iron
Source abstract
Abstract
The nitriding diffusion layer has been considered wearing excessively during diamond turning due to its low nitrogen content in previous research. In this study, by increasing the gas flow rate during the cooling process, an extra needle-precipitates free phase sublayer with a thickness of 25 μm was formed beneath the compound layer, along with the traditional diffusion layer. The microstructure was analyzed and diamond turning test was carried out on each sublayer. After diamond turning all sublayers, no significant wear was observed on the diamond tool. The α-Fe(N) phase with supersaturated nitrogen atoms was found that it can inhibit the wear of the diamond tool. The needle-free precipitates phase sublayer had the lowest surface roughness value after diamond cutting, which was 6.10 nm.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Review of diamond-cutting ferrous metals10.1007/s00170-013-4970-5 ↗
2. Essential causes for tool wear of single crystal diamond in ultra-precision cutting of ferrous metals10.1016/j.diamond.2018.04.012 ↗
3. Water cooled minichannel heat sinks for microprocessor cooling: effect of fin spacing10.1016/j.applthermaleng.2013.12.007 ↗
4. Experimental investigation of convective heat transfer augmentation for car radiator using ZnO–water nanofluids10.1016/j.energy.2015.02.103 ↗
5. Ultra-precision diamond cutting of steel molds10.1016/S0007-8506(07)60480-6 ↗
6. Rapid electrolytic deposition of diamond turnable nickel phosphorus alloy coating10.1016/j.surfcoat.2017.02.017 ↗
7. New diamond turnable coatings of ternary systems for ultraprecision cutting10.1016/S0257-8972(03)00536-X ↗
8. Suppression of diamond tool wear in machining of tungsten carbide by combining ultrasonic vibration and electrochemical processing10.1016/j.ceramint.2017.11.215 ↗
9. A study of the diamond tool wear suppression mechanism in vibration-assisted machining of steel10.1016/j.jmatprotec.2013.10.002 ↗
10. A simple diffusion model for the growth kinetics of γ′ iron nitride on the pure iron substrate10.1016/j.apsusc.2004.09.003 ↗
11. Aghajani · 2017
12. Mechanical properties of layers obtained by DC-Pulsed plasma nitriding on a low-alloy steel (AISI 4140)10.1002/ppap.200932404 ↗
13. Investigation of tool wear suppression in ultraprecision diamond machining of die steel10.1016/j.precisioneng.2011.05.003 ↗
14. Microstructural investigation on the precipitation of α″ nitrides and α″ → γ′ nitride transformation in ion-nitrided pure iron10.1007/s11661-001-1020-y ↗
15. The Fe-N (Iron-Nitrogen) system10.1007/BF02869273 ↗
16. Waseda · 2011
17. A TEM study of α″-Fe16N2 and γ′-Fe4N precipitation in iron-nitrogen10.1016/0001-6160(87)90051-4 ↗
18. Diffusion foundations of the nitriding process10.1007/BF01150762 ↗
19. Xia · 1992
20. Ab initio characterization of B, C, N, and O in bcc iron: solution and migration energies and elastic strain fields10.1016/j.commatsci.2016.07.037 ↗
21. Ab initio study of foreign interstitial atom (C, N) interactions with intrinsic point defects in α -Fe
22. Berns · 2008