Effect of Cr–N precipitations on thermal fatigue behaviour of GX-8 steel nitrided layer
Source abstract
Abstract
Two types of nitrided layers with different nitride precipitates were prepared by salt bath nitriding on the surface of GX-8 steel. The microstructure of the nitrided layers was investigated by SEM, XRD, grazing-incidence XRD and TEM. A cyclic thermal fatigue test system was used to evaluate the influence of nitrides on the thermal fatigue properties of the two nitrided layers. Under the operation of alternating thermal cycles from ambient temperature to 600 °C on the surface, the nitrided surface with a compound layer composed of ε-Fe2-3N phase and strip-shaped CrN had more cracks and spalling than that of the nitrided layer with nanoscale nitrides. Further analysis revealed that the tessellated stress caused by different thermal expansion coefficients of CrN and α-Fe in the interlayer was responsible for the interlaminar deformation, cracking and spalling of the surface.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Boron and Carbon Nanomaterials Research · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Strong resistance to hydrogen embrittlement via surface shielding in multi-layered austenite/martensite steel sheets10.1016/j.msea.2020.140319 ↗
2. Strengthening mechanism of low cycle fatigue resistance for Cr-Mo tempered martensite steel at 350 °C10.1007/s11665-021-05482-0 ↗
3. Effect of oxide on tribological properties at room temperature and corrosion performance of nitride layers on 14Cr12Ni2WMoVNb steel
4. Microstructure and properties of 1Cr12Ni2WMoVNb (GX-8) steel bored barrels with and without QPQ treatment10.1016/j.surfcoat.2017.02.027 ↗
5. Optimizing the mechanical properties of M50NiL steel by plasma nitrocarburizing10.1016/j.apsusc.2014.07.093 ↗
6. Microstructure and mechanical properties of surface layer of M50NiL steel plasma nitrided10.1179/1743294413Y.0000000231 ↗
7. Influence of process time on microstructure and properties of 17-4PH steel plasma nitrocarburized with rare earths addition at low temperature10.1016/j.apsusc.2010.03.121 ↗
8. S-phase surface engineering of Fe-Cr, Co-Cr and Ni-Cr alloys10.1179/095066009X12572530170589 ↗
9. Response to thermal cycling of plasma nitrided hot work tool steel at elevated temperatures10.1016/j.surfcoat.2010.07.035 ↗
10. Thermal fatigue resistance of gas and plasma nitrided 41CrAlMo7 steel10.1016/S0921-5093(02)00867-5 ↗
11. Improvement of stamping performance of H13 steel by compound-layer free plasma nitriding10.1080/02670844.2019.1609172 ↗
12. Effect of the compound layer of plasma nitriding on thermal fatigue behavior of 4Cr5MoSiV1 die steel10.1007/s11741-003-0060-5 ↗
13. Evaluation of thermal fatigue properties of surface treated AISI H13 steel for aluminum die-casting10.4028/www.scientific.net/KEM.326-328.1173 ↗
14. Effect of gas nitriding on the thermal fatigue behavior of martensitic chromium hot-work tool steel10.1016/j.msea.2015.10.007 ↗
15. Alloying element nitride development in ferritic Fe-based materials upon nitriding: a review10.1007/s11665-016-2048-x ↗
16. Chemical machining of nickel in ferric chloride solution10.1007/BF00728908 ↗
17. Effect of multifunction cavitation-treated carbon steel surface on fracture toughness10.1016/j.jmrt.2022.06.117 ↗
18. Thermal fatigue evaluation of AISI H13 steels surface modified by gas nitriding with pre- and post-shot peening10.1016/j.apsusc.2019.03.291 ↗
19. Influence of salt bath nitrocarburizing and post-oxidation process on surface microstructure evolution of 17-4PH stainless steel10.1016/j.jmatprotec.2007.12.082 ↗
20. Application and development of surface nitriding technology of stainless steel in low temperature active salt bath
21. Microstructural, mechanical, and corrosion characterization of nitrogen-implanted plastic injection mould steel10.1016/j.surfcoat.2004.08.163 ↗
22. Pulsed-plasma nitriding of a niobium–alloyed PM tool steel10.1016/j.msea.2004.10.012 ↗
23. TEM and EBSD investigation of continuous and discontinuous precipitation of CrN in nitrided pure Fe-Cr alloys10.1023/B:JMSC.0000034146.64444.80 ↗
24. Microstructure in a plasma-nitrided Fe–18 mass% Cr alloy10.1016/j.actamat.2006.06.006 ↗
25. Crack initiation under thermal fatigue: an overview of CEA experience. Part I: thermal fatigue appears to be more damaging than uniaxial isothermal fatigue10.1016/j.ijfatigue.2008.03.038 ↗
26. Stress field around inclusions and their relation to mechanical properties
27. Study of thermal stress and strain energy in γ-Fe matrix around inclusion caused by thermal coefficient difference
28. Structural and mechanical properties of AlTiN/CrN coatings synthesized by a cathodic-arc deposition process10.1016/j.surfcoat.2006.08.062 ↗