An overview of flow patterns development on disc lower surfaces when processing by high-pressure torsion
Source abstract
Abstract
Stainless steel was selected to study the flow patterns developed with anvil misalignments of 100, 200 and 300 μm on the disc lower surfaces during processing by high-pressure torsion (HPT) through totals of up to 16 turns. A pair of anvils having a roughness of Ra ≈ 15 μm was utilized to investigate the flow pattern development. Discs subjected to only compression in HPT exhibit similar characteristics to the as-received material in the phase domains and there were no overall curvatures of the austenitic (γ) and ferritic (α) phases. Double-swirl flow patterns were not observed in the 1 turn sample but they appeared on the disc lower surfaces after 5 and 16 turns with all three-anvil alignment conditions. There was no significant difference in the double-swirl configuration size for the 5 and 16 turns samples with different amounts of anvil misalignments. These results have important implications for processing metals by HPT.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Bulk nanostructured materials from severe plastic deformation10.1016/S0079-6425(99)00007-9 ↗
2. Using high-pressure torsion for metal processing: fundamentals and applications10.1016/j.pmatsci.2008.03.002 ↗
3. Twenty-five years of ultrafine-grained materials: achieving exceptional properties through grain refinement10.1016/j.actamat.2013.08.018 ↗
4. Structure and deformation behaviour of Armco iron subjected to severe plastic deformation10.1016/S1359-6454(96)00156-5 ↗
5. The evolution of homogeneity in processing by high-pressure torsion10.1016/j.actamat.2006.07.029 ↗
6. Microstructural evolution and mechanical properties of a Cu–Zr alloy processed by high-pressure torsion10.1016/j.msea.2011.06.056 ↗
7. High-pressure torsion of pure magnesium: evolution of mechanical properties, microstructures and hydrogen storage capacity with equivalent strain10.1016/j.scriptamat.2011.01.023 ↗
8. An investigation of hardness homogeneity throughout disks processed by high-pressure torsion10.1016/j.actamat.2010.09.034 ↗
9. Ultrafine grains and the Hall–Petch relationship in an Al–Mg–Si alloy processed by high-pressure torsion10.1016/j.msea.2011.10.074 ↗
10. Achieving homogeneity in a Cu–Zr alloy processed by high-pressure torsion10.1007/s10853-012-6587-8 ↗
11. Microstructural evolution and the mechanical properties of an aluminum alloy processed by high-pressure torsion10.1007/s10853-012-6524-x ↗
12. Strain gradient plasticity modelling of high-pressure torsion10.1016/j.jmps.2007.10.004 ↗
13. A visualization of shear strain in processing by high-pressure torsion10.1007/s10853-009-3998-2 ↗
14. Unusual macroscopic shearing patterns observed in metals processed by high-pressure torsion10.1007/s10853-010-4485-5 ↗
15. Three-dimensional shear-strain patterns induced by high-pressure torsion and their impact on hardness evolution10.1016/j.actamat.2011.03.015 ↗
16. Direct observations of microstructural evolution in a two-phase Cu-Ag alloy processed by high-pressure torsion10.1016/j.scriptamat.2010.03.014 ↗
17. On the homogeneity of deformation by high pressure torsion10.1016/j.scriptamat.2004.04.025 ↗
18. Technical parameters affecting grain refinement by high pressure torsion10.3139/146.110224 ↗
19. Influence of anvil alignment on shearing patterns in high-pressure torsion10.1002/adem.201200363 ↗
20. An investigation of flow patterns and hardness distributions using different anvil alignments in high-pressure torsion10.1007/s10853-012-7015-9 ↗
21. An evaluation of the shearing patterns introduced by different anvil alignments in high-pressure torsion10.1007/s10853-014-8015-8 ↗
22. Factors influencing the shearing patterns in high-pressure torsion
23. Effect of anvil roughness on the flow patterns and hardness development in high-pressure torsion10.1007/s10853-014-8203-6 ↗
24. Using finite element modeling to examine the flow processes in quasi-constrained high-pressure torsion10.1016/j.msea.2011.07.040 ↗
25. Using finite element modeling to examine the temperature distribution in quasi-constrained high-pressure torsion10.1016/j.actamat.2012.02.027 ↗
26. The significance of slippage in processing by high-pressure torsion10.1016/j.scriptamat.2008.08.042 ↗
27. Analysis of plastic flow during high-pressure torsion10.1007/s10853-012-6506-z ↗