Corrosion damage characteristics of aluminum alloy strengthened by ultrasonic surface rolling processing and its influence on fatigue behavior
Source abstract
Abstract
Ultrasonic surface rolling processing (USRP) is used to strengthen 7075 aluminum alloy, the corrosion behavior during immersion is studied by electrochemical impedance spectroscopy, and fatigue performance of different samples under corrosion was tested. Results indicate that 7075 aluminum alloy matrix is prone to form pitting corrosion with a large depth to diameter ratio, multiple crack sources will appear on the surface and propagate simultaneously after pre-corrosion, which significantly reduces the fatigue life. USRP treatment delays the occurrence of pitting of 7075 aluminum alloy, the depth to diameter ratio of pits is also smaller, which reduces the damage effect of corrosion on fatigue, meanwhile, residual compressive stress value of USRP sample remains higher even after corrosion, the above comprehensive effects make its fatigue life higher than that of 7075 aluminum alloy matrix under the same corrosion time.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Advanced Welding Techniques Analysis · Ultrasound and Cavitation Phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Recent developments in advanced aircraft aluminium alloys10.1016/j.matdes.2013.12.002 ↗
2. Recent development in aluminum alloys for aerospace applications10.1016/S0921-5093(99)00674-7 ↗
3. Orthogonal impact load in 6061-T651 and 7075-T651 aluminum alloy plates10.1016/j.jmrt.2023.08.174 ↗
4. Optimizing high cycle fatigue predictions in notched Al 7075-T6: an analytical approach to rotating bending behavior10.1016/j.rineng.2024.103623 ↗
5. Effects of ageing treatment on corrosion behavior of 7075 aluminum alloy coated by micro arc oxidation (MAO)
6. Growth characteristics of stress corrosion cracking in high-strength 7075 aluminum alloy in sodium chloride solutions10.1016/j.engfracmech.2023.109657 ↗
7. Effect of coastal atmospheric corrosion on fatigue properties of 2024-T4 aluminum alloy structures10.1016/j.jallcom.2019.06.235 ↗
8. Surface nanocrystallization (SNC) of metallic materials presentation of the concept behind a new approach
9. Enhanced fatigue performance of aluminum alloy through surface strengthening treatment10.1016/j.matlet.2021.130864 ↗
10. Influence of different shot peening treatments on surface state and fatigue behaviour of Al 6063 alloy10.1016/j.engfracmech.2017.03.017 ↗
11. A comparison of AA2024 and AA7150 subjected to ultrasonic shot peening: microstructure, surface segregation and corrosion10.1016/j.surfcoat.2018.01.072 ↗
12. Enhancement in microstructural and mechanical performance of AA7075 aluminum alloy via severe shot peening and ultrasonic nanocrystal surface modification
13. Effect of ultrasonic nano-crystalline surface modification on the microstructural evolution and mechanical properties of Al5052 alloy10.1002/sia.4959 ↗
14. Microstructural evolution of Al-Zn-Mg-Cu alloy during ultrasonic surface rolling process10.1016/j.matchar.2022.112418 ↗
15. Achieving excellent corrosion resistance properties of 7075 Al alloy via ultrasonic surface rolling treatment10.1016/j.jallcom.2022.165009 ↗
16. Influence of ultrasonic surface rolling on fatigue behavior of 2D12 aluminum alloy
17. Study on surface characteristics of 7050- T7451 aluminum alloy by ultrasonic surface rolling process10.1007/s00170-016-8659-4 ↗
18. Mechanical and corrosion fatigue behaviors of gradient structured 7B50-T7751 aluminum alloy processed via ultrasonic surface rolling10.1016/j.jmst.2019.08.030 ↗
19. Enhanced plasticity and corrosion resistance of high strength Al-Zn-Mg-Cu alloy processed by an improved thermomechanical processing10.1016/j.jallcom.2017.05.047 ↗
20. Influence of ultrasonic surface rolling process on the microstructure and rotating-bending fatigue properties of 7075-T6 aluminum alloys10.1016/j.jmrt.2025.01.009 ↗
21. Research progress of the effect of surface nanocrystallization on the electrochemical corrosion of titanium alloys
22. Effects of ultrasonic surface rolling on the localized corrosion behavior of 7B50-T7751 aluminum alloy10.3390/ma13030738 ↗
23. Electrochemical corrosion behavior of 7075 aluminum alloy with different ultrasonic surface rolling microstructures10.1016/j.jmrt.2024.04.166 ↗
24. Localized corrosion behaviour of AA7150 after ultrasonic shot peening: corrosion depth vs. impact energy10.1016/j.corsci.2017.11.008 ↗
25. Electrochemical corrosion behavior of surface nanocrystallized steel and aluminum alloys by air blast shot peening (ABSP)
26. Very high cycle fatigue of a high strength steel under sea water corrosion: a strong corrosion and mechanical damage coupling10.1016/j.ijfatigue.2015.01.004 ↗
27. Influence of ultrasonic rolling on surface integrity and corrosion fatigue behavior of 7B50-T7751 aluminum alloy10.1016/j.ijfatigue.2019.04.005 ↗
28. Corrosion fatigue crack propagation of 7XXX series aluminum alloys from key components of high-speed train10.1142/S0217979222400239 ↗
29. Corrosion behavior and mechanism of Al-Zn-Mg-Cu alloy based on the characterization of the secondary phases10.1016/j.matchar.2022.111974 ↗
30. Surface rolling deformed severity-dependent fatigue mechanism of Ti-6Al-4V alloy10.1016/j.ijfatigue.2022.106732 ↗
31. Effect of spindle speed during ultrasonic rolling on surface integrity and fatigue performance of Ti6Al4V alloy10.1016/j.ijfatigue.2022.106794 ↗
32. Deformation induced face-centered cubic titanium and its twinning behavior in Ti-6Al-4V10.1016/j.scriptamat.2016.03.018 ↗
33. Face-centered titanium induced by ultrasonic surface rolling process in Ti-6Al-4V alloy and its tensile behavior10.1016/j.matchar.2018.09.004 ↗
34. Grain refinement mechanism under high strain-rate deformation in machined surface during high speed machining Ti6Al4V10.1016/j.msea.2019.03.011 ↗
35. Microstructural evolution mechanisms in rolled 17-4PH steel processed by ultrasonic surface rolling process10.1016/j.msea.2019.138720 ↗
36. Investigation into contributions of static and dynamic loads to compressive residual stress fields caused by ultrasonic surface rolling10.1016/j.ijmecsci.2019.105144 ↗
37. Effect of hybrid surface nanocrystallization on the electrochemical corrosion behavior in 2A14 aluminum alloy
38. SVET, SKP and EIS study of the corrosion behaviour of high strength Al and Al-Li alloys used in aircraft fabrication10.1016/j.corsci.2014.03.001 ↗
39. Electrochemical corrosion behavior of nanocrystallized materials: growth of passive film and local pitting corrosion
40. Pitting corrosion of naturally aged AA 7075 aluminum alloys with bimodal grain size10.1016/j.corsci.2016.09.013 ↗
41. Relationship between dissolved oxygen and corrosion characterization of X80 steel in acidic soil simulated solution10.1016/S1452-3981(23)06631-2 ↗
42. In-situ investigation of atmospheric corrosion behavior of bronze under thin electrolyte layers using electrochemical technique10.1016/S1003-6326(11)61311-3 ↗
43. Shot peening effects on corrosion behavior of commercial pure titanium in body simulating solution10.1088/2053-1591/ab49a6 ↗
44. Investigation on AC corrosion of aluminum alloy sacrificial anode in the artificial simulated seawater environment10.1016/j.electacta.2023.142002 ↗
45. Macro-and micromophologies of pits and initiation of corrosion fatigue crack
46. Effect of pitting corrosion on fatigue crack initiation and fatigue life10.1016/S0013-7944(98)00101-5 ↗
47. Effect of corrosion on the fatigue damage behavior of M50 steel treated by ultrasonic surface rolling process
48. On fatigue crack initiation from corrosion pits in 7075-T7351 aluminum alloy10.1016/S1359-6462(00)00434-6 ↗
49. Effect of pitting corrosion on fatigue life of T6 and T73 of 7075 aluminum alloy
50. Notch sensitivity
51. Neuber · 2001
52. Peterson · 1953
53. Estimating notch fatigue limits via a machine learning-based approach structured according to the classic Kf formulas10.1016/j.ijfatigue.2023.108029 ↗
54. Influence of different surface modification treatments on surface integrity and fatigue performance of TC4 titanium alloy
55. Effect of surface roughness on very high cycle fatigue behavior of Ti-6Al-4V alloy
56. Corrosion fatigue crack initiation behavior of stainless steels10.1016/j.proeng.2010.03.141 ↗
57. Grain size effects on the fatigue response of nanocrystalline metals10.1016/S1359-6462(03)00393-2 ↗
58. Effect of surface nanocrystallization on fatigue crack initiation and propagation behavior in pure Zr10.1016/j.msea.2020.139831 ↗
59. The basic relationships between residual stress, white layer, and fatigue life of hard turned and ground surfaces in rolling contact10.1016/j.cirpj.2009.12.002 ↗
60. Effects of compressive residual stress on short fatigue crack growth in a nickel-based superalloy10.1016/j.ijfatigue.2017.11.010 ↗