Towards intelligent processing: Machine learning-based prediction of flow curves and hot workability maps for Ti71Fe25.15Sn3.85 alloy
Source abstract
Abstract
To identify the best conditions for hot deformation, it is necessary to design innovative alloy systems. Data on flow stress and strain under various hot working scenarios are critical for creating processing (Hot Workability) maps. The deformation characteristics of Ti 71 Fe 25.15 Sn 3.85 ternary alloys were explored through high-temperature compression experiments by a Gleeble® simulator at different temperature (700°C, 800°C, 900°C, and 950°C) with strain rates of 0.01 s -1 , 0.1 s -1 , and 10 s -1 . The alloy exhibited a fine eutectic structure composed of β-Ti and FeTi phases, alongside coarse dendritic Ti 3 Sn and FeTi phases. Five machine learning (ML) models were employed for predicting the flow curve for another strain rate 1 s -1 and generating processing maps. The random forest (RF) model shows exceptional accuracy an R 2 of 96.7%, RMSE of 9.6 %, and MAE of 6.4 %.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Titanium Alloys Microstructure and Properties · Machine Learning in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Novel Ti-base nanostructure–dendrite composite with enhanced plasticity
2. Heterogeneous eutectic structure in ti–fe–sn alloys10.1016/j.intermet.2010.11.030 ↗
3. Formation of a bimodal eutectic structure in ti-fe-sn alloys with enhanced plasticity10.1063/1.2990662 ↗
4. Effect of pouring temperature on microstructure characteristics and properties of semi-solid near-eutectic Al–Si alloy10.1007/s12540-023-01591-8 ↗
5. Design strategies and mechanical behaviour of high-strength eutectic high-entropy alloys: a comprehensive review10.1016/j.jallcom.2025.180000 ↗
6. Microscopic deformation mechanism of a Ti66.1Nb13.9Ni4.8Cu8Sn7.2 nanostructure–dendrite composite10.1016/j.actamat.2006.04.006 ↗
7. Microstructural investigation of a deformed Ti66.1Cu8Ni4.8Sn7.2Nb13.9 nanostructure–dendrite composite10.1016/j.jallcom.2006.08.133 ↗
8. Microstructural evolution and mechanical properties of mg–cu–zn ultrafine eutectic composites10.1557/jmr.2009.0330 ↗
9. Ti-base nanoeutectic-hexagonal structured (D019) dendrite composite10.1016/j.scriptamat.2007.11.027 ↗
10. Development of ultrafine ti-fe-sn in-situ composite with enhanced plasticity
11. Influence of a bimodal eutectic structure on the plasticity of a (Ti 70.5 Fe29.5)91 Sn9 ultrafine composite10.1063/1.3029745 ↗
12. Phase equilibria in fe–sn–ti ternary system at 1073 K and 1273 K10.1016/j.calphad.2015.04.005 ↗
13. Sn effect on microstructure and mechanical properties of ultrafine eutectic ti–fe–sn alloys10.1016/j.jallcom.2008.07.162 ↗
14. Effect of microstructure modulation on mechanical properties of ti-fe-sn ultrafine eutectic composites10.1007/s12540-011-6002-z ↗
15. Solid-state phase transformation-induced heterogeneous duplex structure in ti–sn–fe alloys10.1016/j.jallcom.2011.11.078 ↗
16. Machine learning approach for predicting yield strength of nitrogen-doped CoCrFeMnNi high entropy alloys at selective thermomechanical processing conditions10.1016/j.jmrt.2023.03.146 ↗
17. Constitutive equation and processing parameter sensitivities for hot deformation of pure Mo
18. Machine learning approaches for predicting mechanical performance and reducing experimentation in refractory high-entropy alloys10.1002/adem.202403052 ↗
19. Phase evolution and mechanical behaviour of co–fe–mn–ni–ti eutectic high entropy alloys10.1007/s12666-018-1437-2 ↗
20. The influence of temperature and strain rate on the deformation response and microstructural evolution during hot compression of a titanium alloy Ti-6Al-4V-0.1B10.1016/j.jallcom.2012.08.123 ↗
21. Modeling of hot deformation behavior and prediction of flow stress in a magnesium alloy using constitutive equation and artificial neural network (ANN) model10.1016/j.jma.2018.05.002 ↗
22. Effect of powder preparation technology on the hot deformation behavior of HIPed P/M nickel-base superalloy FGH9610.1016/j.msea.2011.01.118 ↗
23. High temperature deformation behavior and processing maps of FeCoNiCrAlTi dual phase high entropy alloy10.1007/s12540-023-01399-6 ↗
24. Hot deformation behavior and microstructural evolution based on the processing map of dual-phase Mg-Li based alloy10.3390/ma15031022 ↗
25. Study on hot deformation behavior and dynamic recrystallization mechanism of cu-ti-fe alloy
26. Hot deformation behavior and processing map of high-strength nickel brass10.3390/met10060782 ↗
27. Enhancing flow stress predictions in CoCrFeNiV high entropy alloy with conventional and machine learning techniques10.1016/j.jmrt.2024.03.164 ↗
28. Predicting flow stress behavior of an AA7075 alloy using machine learning methods
29. Artificial neural network modeling to predict the high temperature flow behavior of an AZ81 magnesium alloy10.1016/j.matdes.2012.03.002 ↗
30. Leveraging machine learning to minimize experimental trials and predict hot deformation behaviour in dual phase high entropy alloys10.1016/j.mtcomm.2024.110813 ↗
31. Machine-learning-based intelligent framework for discovering refractory high-entropy alloys with improved high-temperature yield strength10.1038/s41524-022-00926-0 ↗
32. Machine-learning and high-throughput studies for high-entropy materials10.1016/j.mser.2021.100645 ↗
33. Machine learning-driven insights into phase prediction for high entropy alloys
34. Machine learning aided prediction and design for the mechanical properties of magnesium alloys10.1007/s12540-023-01531-6 ↗
35. Machine learning approaches for predicting and validating mechanical properties of Mg rare earth alloys for light weight applications10.1080/14686996.2025.2449811 ↗
36. Machine-learning-driven prediction of flow curves and development of processing maps for hot-deformed ni-cu-co-ti-ta alloy
37. Machine learning filters out efficient electrocatalysts in the massive ternary alloy space for fuel cells10.1016/j.apcatb.2023.123128 ↗
38. Interpretable machine learning-based stretch formability prediction of magnesium alloys10.1007/s12613-024-3002-9 ↗
39. Machine learning enabled estimation of formability for anisotropic sheet metals
40. Formability prediction of anisotropic thin sheets using machine learning framework: influence of pre-strain and temperature
41. Machine learning in the prediction of formability in aluminum hot stamping process with multiple variable blank holder force10.1080/0951192X.2022.2128220 ↗
42. Hot Working Guide A Compendium of processing maps
43. Hot workability of co–fe–mn–ni–ti eutectic high entropy alloy10.1016/j.jallcom.2019.153609 ↗
44. Integrated experimental and modeling approach for hot deformation behavior of co–cr–fe–ni–v high entropy alloy10.1016/j.jmrt.2023.05.257 ↗
45. A comprehensive review on hot deformation behavior of high-entropy alloys for high temperature applications
46. Evolution of hot processing map and microstructure of as-forged nickel-based superalloy during hot deformation10.1016/j.jmrt.2023.05.060 ↗
47. Research on hot deformation characterization of a new weathering steel through processing map and microstructural observation10.1038/s41598-025-86619-2 ↗
48. Development of ultrahigh strength novel co–cr–fe–ni–zr quasi-peritectic high entropy alloy by an integrated approach using experiment and simulation10.1016/j.mtla.2020.100896 ↗
49. Experimental and finite element simulation studies on hot deformation behaviour of AlCoCrFeNi2.1 eutectic high entropy alloy10.1016/j.jallcom.2018.03.262 ↗