Effects of diffusion bonding temperature and holding time on the microstructure and strength of diffusion bonded B4C-HfB2-SiC composite ceramic joint
Source abstract
Abstract
Diffusion bonding of B 4 C-HfB 2 -SiC composite ceramic with Ti and NiCoCr medium-entropy alloy as the composite interlayer material was studied in this work. The effects of diffusion bonding temperature and holding time on the interfacial microstructure and mechanical properties of the joints were investigated. The results indicated that diffusion bonding with Ti and NiCoCr medium-entropy alloy as the composite interlayer material could fabricate ceramic joints with good metallurgical bonding without cracks and discontinuities. With a holding time of 10 min, the flexural strength of the joint increased with the diffusion bonding temperature. The joint flexural strength reached the maximum value of 309 MPa when the diffusion bonding temperature was 1200°C. The joint strength increased firstly and then decreased with the holding time increased from 10 min to 70 min for the joints diffusion bonded at 1100°C. The interfacial reaction phases between B 4 C-HfB 2 -SiC composite ceramic and the interlayer materials were characterized in detail by various analysis methods.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Mechanical properties and toughening mechanism of B4C-Al2O3 composite ceramics prepared by hot-press sintering[J]10.1016/j.ceramint.2024.04.183 ↗
2. Temperature-strain rate-dependent flow stress model of ceramic materials[J]10.2109/jcersj2.23199 ↗
3. Mechanical, tribological, and thermal properties of hot-pressed ZrB2-B4C composite[J]10.1111/ijac.12290 ↗
4. Characterization of solidified melt among materials of UO2 fuel and B4C control blade[J]10.1080/00223131.2014.912567 ↗
5. Sintering, toughening mechanism and amorphization of B4C-based ceramic composites: a review[J]
6. Microstructures and mechanical properties of B4C-TiB2-SiC composites fabricated by ball milling and hot pressing [J]10.1016/j.jeurceramsoc.2018.02.020 ↗
7. Microstructure and properties of bilayered B4C-based composites prepared by hot-pressing [J]10.1016/j.ceramint.2024.04.004 ↗
8. Densification behaviour and mechanical properties of B4C-SiC intergranular/intragranular nanocomposites fabricated through spark plasma sintering assisted by mechanochemistry[J]10.1016/j.ceramint.2016.10.150 ↗
9. Boron carbide: structure, properties, and stability under stress[J]10.1111/j.1551-2916.2011.04865.x ↗
10. Microstructure and mechanical properties of brazed B4C-TiB2-SiC-TiC composite joints[J]
11. Fabrication and modeling of ultra-hard and high-strength B4C-based laminated ceramics by brazing joining [J]10.1016/j.ceramint.2022.06.102 ↗
12. Profiling interfacial reaction features and mechanical properties of B4C ceramic and Ti6Al4V titanium alloy brazed with Ag-based brazing filler[J]10.1016/j.jmatprotec.2023.118272 ↗
13. Effect of Mo addition on residual stress and mechanical properties of SiC ceramic/Nb521 alloy joints brazed by using AgCuTi filler10.1016/j.matlet.2021.131500 ↗
14. Microstructure and strengthening mechanism of Si3N4/Invar joint brazed with TiNp-doped filler[J]10.1016/j.msea.2015.10.038 ↗
15. Microstructure and mechanical strength of SiC joints brazed with Cr3C2 particulate reinforced ag-cu-ti brazing alloy[J]10.1016/j.ceramint.2018.04.002 ↗
16. Microstructural evolution and mechanical properties of TiB2-TiC-SiC ceramics joint brazed using Ti-Ni composite foils [J]10.1016/j.jeurceramsoc.2020.03.053 ↗
17. Tao · 2022 · vol. 43
18. Exploring bonding temperature variations in diffusion brazing of B4C ceramics with Ni-Cr-Si-Fe-B interlayer: mechanical and microstructural analysis10.1016/j.ceramint.2024.09.190 ↗
19. Investigation of microstructure and mechanical properties of diffusion brazed boron carbide ceramics with Ni-Cr-Si-Fe-B-C filler alloy10.1007/s40194-024-01912-4 ↗
20. Mechanical and microstructural investigation of the effects of BNi-2 filler metal thickness on boron carbide ceramics diffusion brazing10.1007/s11663-025-03519-6 ↗
21. Effect of different interlayers on microstructure and mechanical properties of diffusion-bonded joints between SiC and 316LN[J]10.1080/14786435.2021.1988746 ↗
22. Microstructural evolution and mechanical properties of Fe-containing high and medium entropy alloys: recent advances and future prospects[J]10.1007/s12666-023-03194-8 ↗
23. Interfacial microstructure and mechanical properties of tungsten alloy/steel diffusion bonding joint using CrFeCoNiCu high entropy alloy interlayer[J]10.1016/j.matchar.2023.112837 ↗
24. Vacuum diffusion bonding of TC4 titanium alloy to T2 copper with VCrNi1.8 eutectic medium entropy alloy interlayer[J]10.1016/j.matchar.2024.114125 ↗
25. Microstructure and shear strength of SiC ceramics diffusion bonded with Ti foils by spark plasma sintering[J]10.3390/ma18081725 ↗
26. Diffusion bonding of TiAl intermetallic and Ti3AlC2 ceramic: interfacial microstructure and joining properties[J]10.1016/j.matdes.2013.10.074 ↗
27. Thickness-dependent phase evolution and bonding strength of SiC ceramics joints with active Ti interlayer[J]10.1016/j.jeurceramsoc.2016.12.009 ↗
28. Effect of the mass fraction of ceramic particles on the porosity of wear-resistant composites fabricated by combustion synthesis[J]10.1007/s11661-018-4839-1 ↗
29. Interfacial microstructure and mechanical properties of the vacuum brazed C/SiC composite and Nb joints[J]10.1016/j.vacuum.2017.09.039 ↗