Coupling μ-computed tomography and multi-scale modelling to assess the mechanical performance of material extrusion metal components

The porosity defects arising in objects produced by metal Material Extrusion (MEX) additive manufacturing affect the macroscopic mechanical behaviour. This paper presents a new approach integrating μ-computed tomography (μXCT) and multi-scale finite element analysis to evaluate the mechanical performance of components fabricated by metal MEX. The porosity information from μXCT is mapped into the finite element model, allowing to define the volume fraction of porosity to each finite mesh element. Then, the Mori-Tanaka homogenization technique is used to estimate the effective mechanical properties in each integration point, assuming a representative volume element composed by a metal matrix with a void. The reliability of the proposed approach was assessed using tensile specimens of stainless steel 316L produced by metal MEX. The numerical predictions were compared with experimental measurements, namely the strain field evolution measured by digital image correlation (DIC). The results highlight the detrimental influence of the porosity distribution, evaluated in the specimen using μXCT, on the strain distribution during the loading stage. The numerical predictions are in agreement with the experimental measurements, i.e. the difference is lower than 11%. Therefore, the proposed approach offers valuable insights for evaluating the mechanical performance of components produced by metal MEX, focusing on the detrimental effects of porosity defects.