Effect of pre-twinning on deformation mechanism of [0001]-textured nanocrystalline Mg by molecular dynamics simulation
Source abstract
Abstract
The effects of pre-twinning on the mechanical behavior and deformation mechanism of [0001]-textured nanocrystalline magnesium (NC Mg) were investigated using molecular dynamics simulations. By introducing different types of twins, it is found that pre-twinning results in a softening effect on the strength of textured NC Mg, and this effect is more pronounced with the misorientation angle of the twin boundaries decreases. The introduction of twin boundaries reduces the accumulation of dislocations and the concentration of stress at the grain boundaries, thereby improving the ductility of textured NC Mg. In addition, pre-twinning promotes the formation of twin chains during loading, thereby reducing interface misorientation and further promoting intergranular dislocation slip. With the migration of twin boundaries, the pre-twinned NC Mg exhibits a coordinated deformation mechanism of small grains assisting large grains. Furthermore, when the loading direction is at an acute angle to the c-axis of the pre-twin, the migration rate of the twin boundary is enhanced, resulting in detwinning or complete twinning of the grains. The current work provides new insights and ideas for improving the mechanical properties of textured NC Mg by pre-twinning.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Microstructure and mechanical properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (71)
Show source-provided references
1. Weight Loss with magnesium alloys10.1126/science.1182848 ↗
2. Magnesium research and applications: Past, present and future10.1016/j.jma.2023.11.007 ↗
3. A lightweight shape-memory magnesium alloy10.1126/science.aaf6524 ↗
4. Designing highly ductile magnesium alloys: current status and future challenges10.1080/10408436.2021.1947185 ↗
5. The origins of high hardening and low ductility in magnesium10.1038/nature15364 ↗
6. Designing a magnesium alloy with high strength and high formability10.1038/s41467-018-04981-4 ↗
7. Simultaneous enhancement of strength and ductility for AZ31 magnesium alloy by pre-twinning induced heterostructure10.1016/j.ijplas.2022.103483 ↗
8. Effect of pre-straining on twinning, texture and mechanical behavior of magnesium alloys A-review10.1016/j.jmrt.2020.10.023 ↗
9. Microstructural evolution and grain growth mechanism of pre-twinned magnesium alloy during annealing10.1016/j.jma.2020.11.015 ↗
10. Effect of pre-twinning and heat treatment on formability of AZX311 Mg alloy10.1016/j.jma.2024.02.008 ↗
11. Current progress in strengthening, plastic deformation and thermal stability of Mg alloys10.1016/j.jallcom.2025.179151 ↗
12. The deformation and ageing of Mild Steel: III discussion of results10.1088/0370-1301/64/9/303 ↗
13. The cleavage strength of Polycrystals
14. Reducing deformation anisotropy to achieve ultrahigh strength and ductility in Mg at the nanoscale10.1073/pnas.1306371110 ↗
15. Nano-dual-phase metallic Glass Film Enhances strength and ductility of a gradient nanograined magnesium alloy10.1002/advs.202001480 ↗
16. Research progress on nanoparticles reinforced magnesium alloys10.1016/j.jmrt.2024.04.129 ↗
17. An engineering route to synthesize stable bulk nanocrystalline magnesium with an average grain size of 20 nm10.1016/j.msea.2022.143134 ↗
18. Bulk nanocrystalline high-strength magnesium alloys prepared via rotary swaging10.1016/j.actamat.2020.09.024 ↗
19. The preparation and mechanical properties of nano-magnesium alloy bulks10.1016/j.jallcom.2019.153253 ↗
20. Microstructure and thermal stability of nanocrystalline AZ31 Mg alloys reinforced by ultrafine vanadium particles10.1016/j.jmrt.2023.01.082 ↗
21. The effect of submicron SiC particles on the thermal stability of nanocrystalline AZ91 alloy10.1016/j.jmrt.2022.11.147 ↗
22. Nanocrystalline AZ91 alloy: preparation, exceptional thermal stability and enhanced hardness10.1016/j.vacuum.2024.113088 ↗
23. Probing the limits of metal plasticity with molecular dynamics simulations10.1038/nature23472 ↗
24. Deformation nanomechanics and dislocation quantification at the atomic scale in nanocrystalline magnesium10.1016/j.jma.2020.08.014 ↗
25. Atomistic simulations of the surface severe plastic deformation-induced grain refinement in polycrystalline magnesium: the effect of processing parameters10.1016/j.jma.2021.01.009 ↗
26. Enhanced mechanical properties of tungsten matrix nanocomposite via the design of carbon nanotube10.1016/j.compstruct.2024.118780 ↗
27. Atomistic simulations of mechanical characteristics dependency on relative density, grain size, and temperature of nanoporous tungsten10.1088/1402-4896/acadb7 ↗
28. Molecular dynamics simulations of the orientation effect on the initial plastic deformation of magnesium single crystals10.1007/s40195-015-0353-2 ↗
29. Molecular dynamics simulation on the cyclic deformation of magnesium single crystals10.1016/j.commatsci.2020.110003 ↗
30. Structural characteristics of {10-11} contraction twin-twin interaction in magnesium10.1016/j.actamat.2020.03.035 ↗
31. Molecular dynamics simulations on the dislocation interactions in magnesium10.1016/j.commatsci.2021.110597 ↗
32. Removing basal-dissociated dislocations by {10-12} deformation twinning in magnesium alloys10.1016/j.actamat.2021.117170 ↗
33. Dislocation evolution mechanism of plastic deformation process of AZ31 magnesium alloy with different grain size10.1016/j.commatsci.2023.112606 ↗
34. Dual-phase nanostructuring as a route to high-strength magnesium alloys10.1038/nature21691 ↗
35. Mechanistic insights into interface-facilitated dislocation nucleation and phase transformation at semicoherent bimetal interfaces10.1016/j.ijplas.2021.103105 ↗
36. Exploring the transfer of plasticity across Laves phase interfaces in a dual phase magnesium alloy10.1016/j.matdes.2021.109572 ↗
37. Room temperature deformation-induced solute segregation and its impact on twin boundary mobility in a Mg-Y alloy10.1016/j.scriptamat.2021.114375 ↗
38. Effect of rare earth element on amorphization and deformation behavior of crystalline/amorphous dual-phase Mg alloys10.1016/j.matdes.2022.110979 ↗
39. The influence of gadolinium concentration on the twin propagation rate in magnesium alloys10.1016/j.jallcom.2023.169635 ↗
40. Effect of pore shape and porosity on the elastic and fracture properties of nanoporous Mg and Mg17Al1210.1016/j.commatsci.2021.110666 ↗
41. Dislocation induced twin growth and formation of basal stacking faults in {10-12} twins in pure Mg10.1016/j.actamat.2018.12.003 ↗
42. Effect of stacking fault and amorphous boundary on plastic deformation mechanism of dual-phase nanostructure Mg alloys10.1016/j.commatsci.2019.03.007 ↗
43. The influence of lamellar twins on deformation mechanism in nanocrystalline magnesium under uniaxial compression10.1007/s10853-019-03803-2 ↗
44. Atomic simulation study on the effect of nanotwin on the compression behavior of Mg–Y alloys10.1016/j.jmrt.2023.07.067 ↗
45. Achieving gradient heterogeneous structure in Mg alloy for excellent strength-ductility synergy10.1016/j.jma.2021.09.021 ↗
46. Understanding the basal texture initiation in a randomly-oriented AZ31B alloy during cold-rolling10.1016/j.jma.2023.12.005 ↗
47. Revealing the deformation mechanisms for room-temperature compressive superplasticity in nanocrystalline magnesium10.1016/j.mtla.2020.100731 ↗
48. Atomsk: a tool for manipulating and converting atomic data files10.1016/j.cpc.2015.07.012 ↗
49. Loading path and strain rate effects on the deformation behavior of [0001] textured nanocrystalline magnesium: an atomic-scale investigation
50. Lammps - a flexible simulation tool for particle-based materials modeling at the atomic, meso, and continuum scales10.1016/j.cpc.2021.108171 ↗
51. A unified relation for the solid-liquid interface free energy of pure FCC, BCC, and HCP metals10.1063/1.4946032 ↗
52. Deformation twinning in polycrystalline Mg microstructures at high strain rates at the atomic scales10.1038/s41598-019-39958-w ↗
53. A new mechanism for nucleation of {11-22}<11-2-3> twinning via interaction of {11-21}<11-2-6> twin variants in hexagonal close-packed metals10.1016/j.actamat.2024.120480 ↗
54. Understanding activation and growth of twin variants in polycrystalline magnesium under tension and compression: An atomistic study10.1016/j.jma.2024.12.007 ↗
55. Visualization and analysis of atomistic simulation data with OVITO–the Open Visualization Tool10.1088/0965-0393/18/1/015012 ↗
56. Robust structural identification via polyhedral template matching10.1088/0965-0393/24/5/055007 ↗
57. Automated identification and indexing of dislocations in crystal interfaces10.1088/0965-0393/20/8/085007 ↗
58. Deformation twinning10.1016/0079-6425(94)00007-7 ↗
59. The role of crystal orientation in cracking performance of HCP magnesium single crystals10.1016/j.mechmat.2024.105235 ↗
60. Atomic structures of symmetric tilt grain boundaries in hexagonal close packed (hcp) crystals10.1088/0965-0393/20/2/024002 ↗
61. Atomic structures of [0-110] symmetric tilt grain boundaries in hexagonal close-packed (hcp) crystals10.1007/s11661-012-1177-6 ↗
62. Jia · 2023
63. Compatibility of deformation in two-phase Ti-Al alloys: Dependence on microstructure and orientation relationships10.1007/BF02670762 ↗
64. Strain rate dependency of dislocation plasticity10.1038/s41467-021-21939-1 ↗
65. A review on the fatigue cracking of twin boundaries: Crystallographic orientation and stacking fault energy10.1016/j.pmatsci.2022.101011 ↗
66. Texture-related strength-ductility trade-off in Mg alloys: New insights from an accurate and efficient semi-analytical relaxed constraint model10.1016/j.jmatprotec.2025.118755 ↗
67. Origins and dissociation of pyramidal dislocations in magnesium and its alloys10.1016/j.actamat.2017.12.049 ↗
68. Dissociation of edge and screw pyramidal I and II dislocations in magnesium10.1016/j.jma.2023.06.013 ↗
69. Loading-direction dependence of non-basal slip activity in a pre-twinned AZ31 magnesium alloy10.1016/j.jallcom.2025.178749 ↗
70. Effect of pre-deformation on precipitation behavior of AZ80 alloy: Comparison of slip- and twinning-dominant deformation10.1016/j.jma.2024.09.001 ↗
71. Second-order deformation behaviors of free-rotational tension after free-end torsion for rolled AZ31B magnesium alloy10.1016/j.msea.2024.146477 ↗