Effect of liquid droplet impingement on electrochemical passivation behavior of 321 stainless steel in 0.5 wt% NaCl solution
Source abstract
Abstract
Liquid droplet impingement (LDI) treatment changes the roughness and introduces residual compressive stress on 321 stainless steel (SS). Compared to untreated 321 SS, 1 h of LDI treatment with 100, 150 and 175 m/s gradually increases the pitting potential of 321 SS, while 1 h of LDI treatment with 200 m/s decreased the pitting potential of 321 SS. The passive films grown on the 321 SS after LDI treatment with 100, 150 and 175 m/s show a decreased receptor density, an increased Cr content and an increased thickness, whereas a dense passive film with good corrosion resistance cannot be formed on the 321 SS after LDI treatment with 200 m/s. The effect of the change in surface state due to LDI treatment on the electrochemical passivation behavior is explained in detail.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · High-Temperature Coating Behaviors · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Studies of two-dimensional liquid-wedge impact and their relevance to liquid-drop impact problems
2. Comparison of cavitation erosion rate with liquid impingement erosion rate10.1016/j.wear.2010.04.020 ↗
3. The mechanics of liquid impact. Academic Press, Treatise on Materials
4. The role of hardening and roughening during the incubation period in water droplet impingement erosion of Ti–6Al–4V
5. Fujisawa · 2021
6. Water droplet erosion behaviour of Ti–6Al–4V and mechanisms of material damage at the early and advanced stages10.1016/j.wear.2016.04.008 ↗
7. 1970
8. Mechanisms of damage initiation in a titanium alloy subjected to water droplet impact during ultra-high pressure plain waterjet erosion10.1016/j.jmatprotec.2012.04.013 ↗
9. Experiments on liquid droplet impingement erosion by high-speed spray10.1016/j.nucengdes.2012.06.022 ↗
10. Attenuation of wall-thinning rate in deep erosion by liquid droplet impingement10.1016/j.anucene.2015.10.024 ↗
11. The corrosion behavior of 316 stainless steel under the cooperative effect of plastic stress and UV illumination in 3.5 wt% NaCl solution10.1016/j.corsci.2023.111466 ↗
12. The effect of pre-deformation on corrosion resistance of the passive film formed on 2205 duplex stainless steel10.1016/j.jallcom.2016.06.003 ↗
13. Effect of strain level on corrosion of stainless steel bar10.1016/j.conbuildmat.2017.11.102 ↗
14. The investigation of laser shock peening effects on corrosion and hardness properties of ANSI 316L stainless steel10.1007/s00170-016-8873-0 ↗
15. Effect of laser shock peening on corrosion resistance of 316L stainless steel laser welded joint10.1016/j.surfcoat.2019.07.048 ↗
16. Influence of shot peening on residual stress distribution and corrosion resistance of additive manufactured stainless steel AISI 316L10.1007/s12666-019-01601-7 ↗
17. Achieving excellent wear and corrosion properties in laser additive manufactured CrMnFeCoNi high-entropy alloy by laser shock peening10.1016/j.surfcoat.2021.127504 ↗
18. Electrochemical studies on the effect of residual stress on the corrosion of 316L manufactured by selective laser melting10.1016/j.corsci.2019.108314 ↗
19. The modification of corrosion resistance of 17-4PH stainless steel by cutting process10.1016/j.jmapro.2019.11.001 ↗
20. Dependence of the critical pitting temperature on surface roughness10.1016/S0010-938X(02)00215-9 ↗
21. Effect of surface machining on the corrosion behaviour of 316 austenitic stainless steel in simulated PWR water10.1016/j.corsci.2017.06.019 ↗
22. Surface roughness and the corrosion resistance of 21Cr ferritic stainless steel10.1016/j.corsci.2012.06.031 ↗
23. Influence of peening on the corrosion properties of AISI 304 stainless steel10.1016/j.corsci.2009.08.008 ↗
24. Obvious improvement in electrochemical and long-term immersion corrosion resistance of AISI 420 martensitic stainless steel using laser shock peening10.1016/j.corsci.2022.110688 ↗
25. Effect of laser peening on the corrosion properties of 304L stainless steel10.3390/ma16020804 ↗
26. Influence of surface mechanical attrition treatment (SMAT) on the corrosion behaviour of AISI 304 stainless steel10.1016/j.corsci.2013.04.056 ↗
27. Enhanced corrosion resistance of the surface modified Ti-13Nb-13Zr alloy by ultrasonic shot peening10.1016/j.corsci.2021.109597 ↗
28. Droplet erosion behavior of nickel foam/polyurethane Co-continuous composite
29. Comparison of cavitation erosion rate with liquid impingement erosion rate10.1016/j.wear.2010.04.020 ↗
30. Residual stresses in DLC/Si and Au/Si systems: application of a stress-relaxation model to the nanoindentation technique10.1557/JMR.2002.0131 ↗
31. Water droplet erosion behaviour of Ti–6Al–4V and mechanisms of material damage at the early and advanced stages10.1016/j.wear.2016.04.008 ↗
32. The effect of initial surface roughness on water droplet erosion behaviour10.1016/j.wear.2015.08.019 ↗
33. On the role of strain hardening and mechanical properties in water droplet erosion of metals10.1016/j.triboint.2022.107649 ↗
34. Drop impingement erosion of metals
35. Indentation method to measure the residual stress induced by ion implantation10.1016/j.nimb.2005.08.008 ↗
36. Passive behavior of a bulk nanostructured 316L austenitic stainless steel consisting of nanometer-sized grains with embedded nano-twin bundles10.1016/j.corsci.2014.04.039 ↗
37. The coupled kinetics of film growth and dissolution of stainless steel repassivating in acid solutions10.1016/0010-938X(84)90070-2 ↗
38. Repassivation of the damage generated by cavitation on UNS N08031 in a LiBr solution by means of electrochemical techniques and Confocal Laser Scanning Microscopy10.1016/j.corsci.2010.06.018 ↗
39. Effect of halide ion and applied potential on repassivation behaviour of Al-1 wt.% Si-0.5 wt.% Cu alloy10.1016/0013-4686(94)00309-O ↗
40. Effect of surface damage induced by cavitation erosion on pitting and passive behaviors of 304L stainless steel10.1007/s12613-023-2602-0 ↗
41. Unveiling the effect of hydrostatic pressure on the passive films of the deformed titanium alloy10.1016/j.corsci.2021.109705 ↗
42. Insight into electrochemical passivation behavior and surface chemistry of 2205 duplex stainless steel: effect of tensile elastic stress10.1016/j.corsci.2021.109903 ↗
43. Determination of effective capacitance and film thickness from constant-phase-element parameters10.1016/j.electacta.2009.10.065 ↗
44. EIS and XPS study of surface modification of 316LVM stainless steel after passivation10.1016/S0010-938X(98)00122-X ↗
45. The ability of a surface charge approach to describe barrier film growth on tungsten in acidic solutions10.1016/S0013-4686(97)00037-6 ↗
46. An electrochemical impedance spectroscopic study of the passive state on Alloy-2210.1016/j.electacta.2005.02.103 ↗
47. Semiconducting properties of passive films formed on stainless steels: influence of the alloying elements10.1149/1.1838880 ↗
48. A study of the passive films on chromium by capacitance measurement10.1016/S0010-938X(02)00148-8 ↗
49. Passive films growth on different Ni-Cr alloys from the migration of cation vacancies10.1007/s10008-015-2981-x ↗
50. Diffusivity of point defects in the passive film on a Ni16Cr13Co4Mo alloy in molten NaCl-Na2SO410.1016/j.corsci.2023.111456 ↗
51. Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Cr, Mn, Fe, Co and Ni10.1016/j.apsusc.2010.10.051 ↗
52. pH dependent passivation behavior of niobium in acid fluoride-containing solutions10.1016/j.electacta.2018.07.221 ↗
53. The history of the Point Defect Model for the passive state: a brief review of film growth aspects10.1016/j.electacta.2010.11.005 ↗
54. The corrosion behavior of 316 stainless steel under the cooperative effect of plastic stress and UV illumination in 3.5 wt % NaCl solution10.1016/j.corsci.2023.111466 ↗
55. Local electrochemical impedance spectroscopy study of the influence of ageing in air and laser shock processing on the micro-electrochemical behaviour of AA2050-T8 aluminium alloy10.1016/j.electacta.2011.01.091 ↗
56. Influence of surface roughness on the electrochemical behavior of carbon steel10.1007/s10800-013-0534-5 ↗
57. Influence of surface morphology on corrosion and electronic behavior10.1016/j.actamat.2005.09.017 ↗
58. Misorientation development in grains of tensile strained and crept 2.25%Cr–1%Mo steel10.1016/S1359-6462(01)01197-6 ↗
59. Unraveling the mechanics of directional coarsening in single crystal Ni-based superalloys via laser peening: insights from experimental characterization and microstructural analysis10.1016/j.jallcom.2024.175851 ↗
60. The oxygen evolution reaction drives passivity breakdown for Ni–Cr–Mo alloys10.1002/adma.202304621 ↗