journal article·2024-07Open access

Effect of Li addition on the precipitation behavior of AA6061 alloy

Hyeon-Woo Son, Sung-Ho Kang, Kwangjun Euh, Yun-Soo Lee, Kyoungdoc Kim

Abstract

This study investigates the effect of minor Li addition on the solute clustering and thermal stability of precipitates in artificially aged Al–Mg–Si–Cu (AA6061) alloys. Li addition hinders the initial changes in hardness and electrical conductivity by delaying solute clustering during early aging. The delay in cluster formation is attributed to the disturbance of Mg enrichment by the formation of Si–Li clusters, unlike the Sn element with vacancy-trapping effect. Additionally, Li addition is found to coarsen the precipitates during over aging, thereby reducing the thermal stability of the Al–Mg–Si–Cu alloy. Gibbsian interfacial excess calculations of the Li solute indicate that the low coarsening resistance of the Li-containing precipitate is mainly caused by the small amount of equilibrium Li segregation at the internal interface between the matrix and over-aged precipitate. A decrease in the number of nucleation sites, originating from the suppression of cluster formation in the early-aging stage, is also suggested as a reason for the coarse precipitate structure. Finally, despite the high solubility of Li into precipitates, Li addition does not disorder or change the crystal structure of the precipitates. It simply increases the volume of the precipitate by an amount equivalent to or greater than the added Li, without increasing the thermal stability.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. The disordered structure of Q′ and C phases in Al–Mg–Si–Cu alloy10.1016/j.scriptamat.2016.03.011 ↗
2. The effect of low Cu additions on precipitate crystal structures in overaged Al-Mg-Si(-Cu) alloys10.1016/j.matchar.2019.110087 ↗
3. Improving thermal stability in Cu-containing Al-Mg-Si alloys by precipitate optimization10.1007/s11661-014-2250-0 ↗
4. The structural and compositional evolution of precipitates in Al-Mg-Si-Cu alloy10.1016/j.actamat.2017.12.036 ↗
5. The effect of Cu on precipitation in Al–Mg–Si alloys10.1080/14786430701287377 ↗
6. Study of intergrown L and Q′ precipitates in Al–Mg–Si–Cu alloys10.1016/j.scriptamat.2011.01.008 ↗
7. Precipitation behavior during re-aging of Al-Mg-Si-Cu alloy10.1016/j.matdes.2022.110883 ↗
8. The inflnuence of temperature and storage time at RT on nucleation of the β″ phase in a 6082 Al–Mg–Si alloy10.1016/S1359-6454(02)00470-6 ↗
9. Reversal of the negative natural aging effect in Al–Mg–Si alloys10.1016/j.actamat.2012.07.047 ↗
10. Cluster evolution mechanisms during aging in Al–Mg–Si alloys10.1016/j.actamat.2015.09.027 ↗
11. The influence of Mg/Si ratio on the negative natural aging effect in Al–Mg–Si–Cu alloys10.1016/j.msea.2015.06.090 ↗
12. Three-dimensional atom probe characterization of nanoclusters responsible for multistep aging behavior of an Al-Mg-Si alloy10.1007/s11661-007-9438-5 ↗
13. Atomic-scale pathway of early-stage precipitation in Al–Mg–Si alloys10.1016/j.actamat.2014.09.004 ↗
14. Effect of Sn contents on natural aging and precipitation hardening in Al-Mg-Si alloys10.1016/j.matchar.2021.111383 ↗
15. Effect of Cu and Ge on solute clustering in Al–Mg–Si alloys10.1016/j.msea.2016.01.095 ↗
16. Effects of germanium, copper, and silver substitutions on hardness and microstructure in lean Al-Mg-Si alloys10.1007/s11661-015-3039-5 ↗
17. Precipitates in an Al–Mg–Ge alloy studied by aberration-corrected scanning transmission electron microscopy10.1016/j.actamat.2011.06.021 ↗
18. Microalloying for the controllable delay of precipitate formation in metal alloys10.1016/j.actamat.2016.01.014 ↗
19. Solute-vacancy clustering in aluminum10.1016/j.actamat.2020.06.062 ↗
20. Effect of Ag addition on the precipitation evolution and interfacial segregation for Al-Mg-Si alloy10.1016/j.actamat.2019.09.015 ↗
21. HAADF-STEM study of β′-type precipitates in an over-aged Al–Mg–Si–Ag alloy10.1080/14786435.2011.642319 ↗
22. Formation of β"-related composite precipitates in relation to enhanced thermal stability of Sc-alloyed Al-Mg-Si alloys10.1016/j.jallcom.2021.160942 ↗
23. The effects and behaviour of Li and Cu alloying agents in lean Al-Mg-Si alloys10.1016/j.jallcom.2016.12.273 ↗
24. Comparative and complementary characterization of precipitate microstructures in Al–Mg–Si(–Li) alloys by transmission electron microscopy, energy dispersive X-ray spectroscopy and atom probe tomography10.1016/j.jallcom.2014.10.199 ↗
25. Analysis of strengthening in AA6111 during the early stages of aging: atom probe tomography and yield stress modelling10.1016/j.actamat.2013.08.033 ↗
26. Gault · 2012
27. On the precipitation-hardening behavior of the Al-Mg-Si-Cu alloy AA6111
28. Equilibrium segregation and interfacial energy in multicomponent systems10.1016/0956-7151(91)90277-8 ↗
29. Coupled segregation mechanisms of Sc, Zr and Mn at θ interfaces enhances the strength and thermal stability of Al-Cu alloys10.1016/j.actamat.2021.116634 ↗
30. Microstructural and mechanical properties of precipitation-strengthened Al-Mg-Zr-Sc-Er-Y-Si alloys10.1016/j.actamat.2023.119167 ↗
31. Absolute atomic-scale measurements of the Gibbsian interfacial excess of solute at internal interfaces10.1103/PhysRevB.48.6724 ↗