Investigation of in-plane visco-deformation in PMMA indentation via TLV model calibrated with tensile specimens
Source abstract
Abstract
Time-dependent in-plane deformation in PMMA indentation is investigated via two-layer visco-plasticity model (TLV). The parameters of TLV model for PMMA were calibrated for tensile specimens using finite element analysis (FEA) and an optimization approach. The TLV model with the calibrated parameters was then employed to simulate nano- and micro-indentation behaviors including creep, relaxation, and other responses under various test conditions. Comparisons of experimental and FEA indentation load-depth curves showed agreement except the last unloading segment. This discrepancy was attributed to the inability of TLV model in replicating the delayed elastic recovery. In addition, deformation recovery with in-plane displacement (ui) was observed over a few days after indentation load removal. The characteristics of ui recovery and the factors influencing its magnitude are discussed. The proportionality of relative ui recovery rate prominently featured in the viscoelastic properties of PMMA, regardless of indentation history.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Effects of experimental variables on PMMA nano-indentation measurements10.1016/j.polymertesting.2014.09.015 ↗
2. The methods of specifying the properties of viscoelastic materials10.1063/1.1707524 ↗
3. Viscoelastic characterization and modeling of polymer transducers for biological applications10.1109/JMEMS.2009.2029166 ↗
4. Optimum creep lifetime of polymethyl methacrylate (PMMA) tube using rheological creep constitutive models based on experimental data10.1016/j.polymertesting.2019.01.016 ↗
5. Modeling the thermo-mechanical behavior and constrained recovery performance of cold-programmed amorphous shape-memory polymers10.1016/j.ijplas.2019.102654 ↗
6. A large deformation model for quasi-static to high strain rate response of rate-stiffening soft polymers10.1016/j.ijplas.2023.103701 ↗
7. Nonlinearly viscoelastic nanoindentation of PMMA under a spherical tip10.1007/s11340-012-9695-0 ↗
8. Performance of a parallel viscoelastic-viscoplastic model for a microcellular thermoplastic foam on wide temperature range10.1016/j.polymertesting.2020.106395 ↗
9. Viscoplastic parameter identification of temperature‐dependent mechanical behavior of modified polyphenylene oxide polymers10.1002/pen.24910 ↗
10. Application of two‐layer viscoplasticity model to predict a semicrystalline polymer response under compression and microindentation10.1002/pen.25902 ↗
11. A constitutive material model for a commercial PMMA bone cement using a combination of nano-indentation test and finite element analysis10.1016/j.polymertesting.2017.01.031 ↗
12. Evaluation of thin film material properties using a deep nanoindentation and ANN10.1016/j.matdes.2022.111000 ↗
13. Atomic insights on intermixing of nanoscale nitride multilayer triggered by nanoindentation10.1016/j.actamat.2021.117004 ↗
14. Coupled effect of crystallographic orientation and indenter geometry on nanoindentation of single crystalline copper10.1016/j.ijmecsci.2018.09.007 ↗
15. Lu · 2020 · vol. 117 · 7052
16. Deep learning based nanoindentation method for evaluating mechanical properties of polymers10.1016/j.ijmecsci.2023.108162 ↗
17. Measurement of power-law creep parameters by instrumented indentation methods10.1016/j.jmps.2012.09.009 ↗
18. Identification of the viscoplastic behavior of a polycarbonate based on experiments and numerical modeling of the nano-indentation test10.1023/A:1019644630927 ↗
19. Digital image correlation analysis of strain recovery in glassy polymer network isomers10.1016/j.polymer.2015.11.026 ↗
20. Temperature dependence of creep and recovery behaviors of polymer composites filled with chemically reduced graphene oxide10.1016/j.compositesa.2014.11.031 ↗
21. Recovery behavior of thermoplastic polymers in micro hot embossing process10.1016/j.jmatprotec.2016.12.024 ↗
22. A finite strain thermodynamically-based constitutive framework coupling viscoelasticity and viscoplasticity with application to glassy polymers10.1016/j.ijplas.2017.08.001 ↗
23. Experimental and modeling study of the viscoelastic-viscoplastic deformation behavior of amorphous polymers over a wide temperature range10.1016/j.mechmat.2022.104246 ↗
24. Creep and recovery analysis of polymeric materials during indentation tests10.1016/j.euromechsol.2017.10.003 ↗
25. Extracting plastic properties from in-plane displacement data of spherical indentation imprint10.1016/j.ijmecsci.2021.106291 ↗
26. Deep learning-based indentation plastometry in anisotropic materials10.1016/j.ijplas.2022.103403 ↗
27. Evaluation of equi-biaxial residual stress from spherical indentation imprint10.1016/j.ijmecsci.2021.106773 ↗
28. 2016
29. A time and hydration dependent viscoplastic model for polyelectrolyte membranes in fuel cells10.1007/s11043-007-9040-7 ↗
30. Implementation and evaluation of optical flow methods for two-dimensional deformation measurement in comparison to digital image correlation10.1016/j.optlaseng.2018.03.021 ↗
31. Measuring microscale in-plane indentation displacement field for material characterization10.1109/TIM.2024.3366585 ↗
32. 2020
33. Mechanical characterization of sol-gel epoxy-silylated hyperbranched poly (ethyleneimine) coatings by means of Depth Sensing Indentation methods10.1016/j.porgcoat.2015.11.017 ↗
34. Effects of hydrostatic pressure on the mechanical behavior of polyethylene and polypropylene10.1063/1.1657180 ↗
35. Determination of the Drucker–Prager parameters of polymers exhibiting pressure-sensitive plastic behaviour by depth-sensing indentation10.1016/j.ijmecsci.2011.04.002 ↗
36. Full-surface deformation measurement of aniso-tropic tissues under indentation10.1016/j.medengphy.2015.03.005 ↗
37. Goodship · 2017 · 107
38. Current innovations in roller embossing − A comprehensive review10.1007/s00542-022-05265-0 ↗
39. Bioinspired antireflective flexible films with optimized mechanical resistance fabricated by roll to roll thermal nanoimprint10.1038/s41598-021-81560-6 ↗
40. Temperature-dependent mechanical behaviour of PMMA: Experimental analysis and modelling10.1016/j.polymertesting.2016.12.016 ↗