Study on the microstructure and creep fracture behavior of 22Cr 15Ni steel welded joint after aging at 650 °C
Source abstract
Abstract
It has been carefully investigated that microstructure and creep fracture behavior of Fe–22Cr–15Ni (SP2215) steel welded joints on aging at 650 °C. The extrapolated stresses for welded joint after aging for 0 h (Aging-0h WJ) and 2012 h (Aging-2012h WJ) at 10 5 h are 105.2 and 91.7 MPa, respectively. The fracture location for Aging-0h WJ and Aging-2012h WJ was respectively heat affected zone (HAZ) and weld metal (WM). HAZ grain size of Aging-0h WJ was 53–88 μm because of thermal cycling. After 2012h aging, HAZ grain size did not change, but grain boundaries were roughened and M 23 C 6 has been found on grain boundaries. Welding and aging treatment did not cause element migration near the fusion line. However, the decrease in Nb elements on the weld side resulted in a decrease in the amount of NbC, which delayed creep damage. The 2012h aging had no significant effect on the hardness difference between HAZ and WM near fusion line, indicating that the transfer of creep fracture position was caused by microstructure changes. The cluster-like NbC formed in WM of Aging-2012h WJ, which not only reduced Nb solid strengthening effect, but also caused local strain concentration. Moreover, in WM of Aging-2012h WJ, the orientation and hardness differences between large-sized (Nb, Ti) C and matrix, and M 23 C 6 on the grain boundary jointly reduced the WM creep performance.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Tensile yield behavior and precipitation strengthening mechanism in Super304H steel10.1016/j.msea.2014.01.085 ↗
2. Effect of preexisting plastic deformation on the creep behavior of TP347 austenitic steel10.1016/j.msea.2015.12.051 ↗
3. Microstructural stability and creep rupture strength of the martensitic steel P92 for advanced power plant10.1016/S1359-6454(97)00176-6 ↗
4. Dramatically enhanced impact toughness in welded 10%Cr rotor steel by high temperature post-weld heat treatment10.1016/j.matchar.2014.03.014 ↗
5. A machine-learning approach to predict creep properties of Cr–Mo steel with time-temperature parameters10.1016/j.jmrt.2021.04.079 ↗
6. Creep behavior and life assessment of a novel heat-resistant austenite steel and its weldment10.1007/s40195-018-0822-5 ↗
7. Failure study of creep and high-temperature tensile tested tungsten inert gas welded P92 steel and AISI 304L steel dissimilar weld joints
8. The effect of filler metal on microstructure and mechanical performance of GTAW inconel 625 at room and elevated temperature10.1016/j.ijpvp.2022.104760 ↗
9. P92 steel and inconel 617 alloy welds joint produced using ERNiCr-3 filler with GTAW process: solidification mechanism, microstructure, mechanical properties and residual stresses10.1016/j.heliyon.2023.e18959 ↗
10. Dissimilar joining of the martensitic grade P91 and Incoloy 800HT alloy for AUSC boiler application: microstructure, mechanical properties and residual stresses10.1016/j.cirpj.2022.06.009 ↗
11. Creep damage and crack propagation behavior of printed circuit heat exchanger manufactured by diffusion welding: from material to structure10.1016/j.jmrt.2023.09.310 ↗
12. Enhancing mechanical properties and creep performance of 304H and inconel 617 superalloy dissimilar welds for Advanced Ultra Super Critical power plants10.1016/j.ijpvp.2022.104882 ↗
13. Effect of post weld heat treatments on microstructure evolution and type IV cracking behavior of the P91 steel welds joint10.1016/j.jmatprotec.2018.10.024 ↗
14. Creep damage evaluation in high-pressure rotor based on hardness measurement10.1007/s11665-015-1555-5 ↗
15. Creep damage evaluation of 9Cr-1Mo-V-Nb steel welded joints showing type IV fracture10.1016/j.ijpvp.2005.09.004 ↗
16. Creep behavior of dissimilar metal weld joints between P91 and AISI 30410.1016/j.msea.2017.02.026 ↗
17. A comparison of creep rupture strength of ferritic/austenitic dissimilar weld joints of different grades of Cr-Mo ferritic steels
18. Dramatically enhanced creep rupture performance and failure analysis of 9CreCrMoV dissimilar welded joint10.1016/j.msea.2015.07.068 ↗
19. Effect of internal pressure on microstructural and mechanical properties of X10CrNiCuNb18-9-3 (SUPER 304H) austenitic stainless steel
20. Precipitation strengthening of Nb-stabilized TP347 austenitic steel by a dispersion of secondary Nb(C,N) formed upon a short-term hardening heat treatment10.1016/j.msea.2015.09.028 ↗
21. Dislocation creep modelling of Sanicro 25 based on microstructural evolution and particle hardening mechanism
22. Beneficial role of the grain boundary precipitates for intergranular creep fracture of 25Cr–20Ni–Nb–N steel10.1016/j.msea.2023.145487 ↗
23. Enhancing the high temperature plasticity of a Cu-containing austenitic stainless steel through grain boundary strengthening10.1016/j.msea.2014.02.054 ↗
24. Fusion boundary evolution, precipitation behaviour, and interaction with dislocations in an Fe–22Cr–15Ni steel weldment during long-term creep10.1016/j.pnsc.2019.01.002 ↗
25. Assessment of the creep damage in HR3C steel using the misorientation parameters derived from EBSD technique10.1016/j.matlet.2021.130893 ↗
26. Microstructures and mechanical properties of dissimilar T91/347H steel weldments10.1016/j.jmatprotec.2015.01.008 ↗
27. Microstructural studies of P91 and SS304L dissimilar welding10.1016/j.matpr.2021.05.434 ↗
28. A critical review on dissimilar welds joint between martensitic and austenitic steel for power plant application10.1016/j.jmapro.2020.08.019 ↗
29. Study on evaluation of through-thickness residual stresses and microstructure-mechanical property relation for dissimilar welded joint of modified 9Cr–1Mo and SS304H steel10.1016/j.ijpvp.2021.104557 ↗
30. Development and evaluation of dissimilar gas tungsten arc-welded joint of P92 steel/inconel 617 alloy for advanced ultra-supercritical boiler applications10.1007/s11661-022-06723-0 ↗
31. The role of grain boundary ferrite evolution and thermal aging on creep cavitation of type 316H austenitic stainless steel10.1016/j.msea.2021.140859 ↗
32. Experimental investigation on creep behaviors and life prediction across phase-transformation of thermal aged 16MND5 steel10.1016/j.ijpvp.2023.105063 ↗
33. Stacking fault energies of seven commercial austenitic stainless steels
34. Relationship between the evolution of phase parameters of grain boundary M23C6 and embrittlement of HR3C super-heater tubes in service
35. Creep deformation and rupture behavior of 10Cr-3Co-2W heat-resistant steel weldments in ultra supercritical power unitst10.1016/j.engfailanal.2021.105984 ↗
36. Investigating creep rupture and damage behaviour in notched P92 steel specimen using a microscale modelling approach10.1111/ffe.12713 ↗
37. Tensile deformation behavior of ferrite-bainite dual-phase pipeline steel10.1016/j.msea.2021.142230 ↗
38. Comparative study on microstructure and mechanical properties of a novel nano-composite strengthening heat-resistant steel and two typical heat-resistant steels
39. Effect of nickel-based filler metal types on creep properties of dissimilar metal welds between Inconel 617B and 10% Cr martensitic steel10.1016/j.msea.2019.138185 ↗
40. Phase instabilities during high temperature exposure of 316 austenitic stainless steel10.1007/BF02647659 ↗
41. The interfacial energy of coherent twin boundaries in copper10.1080/14786436108243349 ↗
42. Grain boundary design and control for high temperature materials10.1016/0921-5093(93)90306-Y ↗
43. Correlation of grain boundary connectivity with grain boundary character distribution in austenitic stainless steel10.1016/j.actamat.2006.03.048 ↗