Relative assessment of the microstructure, properties and bioactivity of 3D-printed and rolled Ti6Al4V with micro-arc oxidation (MAO) and hydrothermal (HT) treatment
Source abstract
Abstract
The surface modification of 3D printed Ti6Al4V (3D-Ti64) and rolled Ti6Al4V (RO-Ti64) was carried out using optimized micro-arc oxidation (MAO) and hydrothermal (HT) treatment processes. The results showed that the 3D-Ti64 coating had a typical porous structure that was identical to the phase composition of the RO-Ti64 coating, and both exhibited super hydrophilic properties (contact angle of 0°). It was found that the 3D-Ti64 coating (1.40 × 10−7A/cm2, 39.38 MPa) had greater corrosion current density and adhesion strength compared to the RO-Ti64 coating (0.76 × 10−7A/cm2, 33.69 MPa). In addition, the HAP crystals formed by 3D-Ti64 and RO-Ti64 coatings after being cultured in SBF were not significantly different, indicating that both coatings had comparable in vitro bioactivity. However, the 3D-printed porous Ti64 coating formed a porous structure only around the edges, while the central region had a flocculent structure with unfinished electrolytic oxidation. Moreover, it was found that more HAP crystals were formed in the edge region after HT treatment. In short, the MAO and HT treatment parameters optimized on rolled Ti alloys can be inherited for continued use on 3D-printed Ti alloy solids. However, more considerations may need to be made for the 3D printing of porous Ti alloys.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Titanium Alloys Microstructure and Properties · Orthopaedic implants and arthroplasty
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Review on titanium and titanium based alloys as biomaterials for orthopaedic applications10.1016/j.msec.2019.04.064 ↗
2. A review on alloy design, biological response, and strengthening of β-titanium alloys as biomaterials10.1016/j.msec.2020.111661 ↗
3. Biocompatibility of micro/nano structures on the surface of Ti6Al4V and Ti-based bulk metallic glasses induced by femtosecond laser10.1016/j.bioadv.2022.212998 ↗
4. Comparative study on 3D printed Ti6Al4V scaffolds with surface modifications using hydrothermal treatment and microarc oxidation to enhance osteogenic activity10.1021/acsomega.0c05191 ↗
5. Printing of Titanium implant prototype10.1016/j.matdes.2009.12.050 ↗
6. Comparative investigation on the adhesion of hydroxyapatite coating on Ti–6Al–4V implant: a review paper10.1016/j.ijadhadh.2013.09.030 ↗
7. Sol-gel derived hydroxyapatite coatings for titanium implants: a review10.3390/bioengineering7040127 ↗
8. Plasma sprayed fluoride and zinc doped hydroxyapatite coated titanium for load-bearing implants10.1016/j.surfcoat.2022.128464 ↗
9. Review of the biocompatibility of micro-arc oxidation coated titanium alloys10.1016/j.matdes.2015.07.086 ↗
10. Surface characterization of titanium-based substrates for orthopaedic applications10.1016/j.matchar.2021.111161 ↗
11. Preparation of HA-containing coating by one-step MAO on titanium alloys through synergistic effect of calcium gluconate and calcium glycerophosphate10.1016/j.surfcoat.2023.129655 ↗
12. Osteogenic potential of a novel microarc oxidized coating formed on Ti6Al4V alloys10.1016/j.apsusc.2017.03.191 ↗
13. Performance and failure process of green recycling solutions for preparing high degradation resistance coating on biomedical magnesium alloys10.1039/D2GC02638D ↗
14. Fast formation of a black inner α‐Al2O3 layer doped with CuO on Al‐Cu‐Li alloy by soft sparking PEO process10.1111/jace.19240 ↗
15. Wear properties of micro arc oxidized and hydrothermally treated Ti6Al4V alloy in simulated body fluid10.1016/j.wear.2010.12.039 ↗
16. Fabrication of hydroxyapatite on pure titanium by micro-arc oxidation coupled with microwave-hydrothermal treatment10.1007/s10856-015-5429-z ↗
17. Surface analyses of micro‐arc oxidized and hydrothermally treated titanium and effect on osteoblast behavior10.1002/jbm.a.20063 ↗
18. Hydroxyapatite production on ultrafine-grained pure titanium by micro-arc oxidation and hydrothermal treatment10.1016/j.surfcoat.2011.03.032 ↗
19. Hydroxyapatite-coated titanium by micro-arc oxidation and steam–hydrothermal treatment promotes osseointegration
20. Rapidly formation of the highly bioactive surface with hydroxyapatite crystals on the titania micro arc oxidation coating by microwave hydrothermal treatment10.1016/j.apsusc.2019.05.165 ↗
21. Biomimetic apatite induction of P-containing titania formed by micro-arc oxidation before and after hydrothermal treatment10.1016/j.surfcoat.2007.08.003 ↗
22. Effect of hydrothermal treatment on the surface characteristics and bioactivity of HAP based MAO coating on Ti-6Al-4V alloy10.1016/j.surfcoat.2023.129566 ↗
23. Biomimetic design strategy of complex porous structure based on 3D printing Ti-6Al-4V scaffolds for enhanced osseointegration10.1016/j.matdes.2022.110721 ↗
24. Structural design and mechanical response of gradient porous Ti-6Al-4V fabricated by electron beam additive manufacturing10.1016/j.matdes.2018.08.027 ↗
25. Tailored surface treatment of 3D printed porous Ti6Al4V by microarc oxidation for enhanced osseointegration via optimized bone in-growth patterns and interlocked bone/implant interface10.1021/acsami.6b05893 ↗
26. Development of bone adapted 3D printed Ti6Al4V scaffold via unit optimization and acid etching-MAO double treatment10.1016/j.matlet.2022.133500 ↗
27. The effect of applied voltages on the structure, apatite-inducing ability and antibacterial ability of micro arc oxidation coating formed on titanium surface
28. Enhanced osseointegration of hierarchical micro/nanotopographic titanium fabricated by microarc oxidation and electrochemical treatment10.1021/acsami.5b10633 ↗
29. Effects of electrolyte concentration on the microstructure and properties of plasma electrolytic oxidation coatings on Ti-6Al-4V alloy10.1016/j.surfcoat.2019.07.053 ↗