High-temperature corrosion of weld overlay coating/bulk FeCrAl exposed in O2 + H2O + KCl(s) at 600 °C – A microstructural investigation
Source abstract
Abstract
This work investigates the impact of high-temperature corrosion behavior of the newly developed FeCrAl alloy Kanthal® EF101 bulk material and weld overlay coating in the presence of KCl(g)/KCl(s) at 600 °C. The oxide scale formed within the secondary corrosion regime after exposure and the impact of alloy microstructure on corrosion behavior was investigated using scanning transmission electron microscopy. The findings indicated the key microstructural differences is the alloy grain size which influences the formation of a protective scale. In addition, It is indicated that coating exhibited inferior performance than the bulk material, primarily attributed to the microstructural differences.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Ioannis · 2020
2. Field exposure of FeCrAl model alloys in a waste-fired boiler at 600°C: the influence of Cr and Si on the corrosion behaviour10.1002/maco.201810618 ↗
3. Critical corrosion phenomena on superheaters in biomass and waste-fired boilers10.1016/S1006-706X(08)60048-5 ↗
4. High temperature corrosion mechanism of Ni–5W–6B–28Cr–13Al alloy in simulated MSW incineration environment10.1016/j.jmrt.2022.11.175 ↗
5. Influence of flowing water vapor containing environment on high-temperature behavior of 9Cr creep-resistant steels10.1016/j.jmrt.2023.01.206 ↗
6. Beyond breakaway corrosion – influence of chromium, nickel and aluminum on corrosion of iron-based alloys at 600 °C10.1016/j.corsci.2020.108961 ↗
7. The effect of water vapor on the initial stages of oxidation of the FeCrAl alloy kanthal AF at 900 °C10.1007/s11085-007-9055-0 ↗
8. TEM investigation of the oxide scales formed on a FeCrAlRE alloy (Kanthal AF) at 900°C in dry O 2 and O 2 with 40% H 2 O10.3184/096034005782744119 ↗
9. The influence of Si on the primary protection of lean FeCrAl model alloys in O2 and O2+H2O at 600 °C—a microstructural investigation10.1016/j.corsci.2020.109155 ↗
10. Oxidation studies on the iron-chromium-aluminum heater alloys10.1149/1.2427333 ↗
11. Field · 2017
12. Oxidation behavior of high-strength FeCrAl alloys in a high-temperature supercritical carbon dioxide environment10.1016/j.pnsc.2018.11.004 ↗
13. Corrigendum to “Exploring the high-temperature steam oxidation behaviors of the lean-Cr (7–10 wt%) FeCrAl alloys”10.1016/j.corsci.2021.109927 ↗
14. A study of the oxidation behaviour of FeCrAl-ODS in air and steam environments up to 1400 °C10.1016/j.jnucmat.2020.152305 ↗
15. High temperature corrosion behavior of FeCrAlSi model alloys in the presence of water vapor and KCl at 600 °C – the influence of Cr content10.1016/j.corsci.2022.110114 ↗
16. Beyond breakaway corrosion – influence of chromium, nickel and aluminum on corrosion of iron-based alloys at 600 °C
17. Hot corrosion of Inconel 625 wrought alloy and weld overlay on carbon steel by gas metal arc welding in 47 PbSO4-23 ZnO-13 Pb3O4-7 PbCl2-5 CdO-5 Fe2O3 molten salt mixture10.1016/j.corsci.2021.109348 ↗
18. Effect of post-weld heat treatment (PWHT) on the intergranular corrosion of ENiCrFe-7 weld overlay cladding materials10.1016/j.jmrt.2020.05.101 ↗
19. Microstructure, mechanical and corrosion behaviour of weld overlay cladding of DMR 249A steel with AISI 308L10.1016/j.matpr.2019.05.017 ↗
20. Weld overlay coating of Inconel 617 M on type 316 L stainless steel by cold metal transfer process10.1016/j.surfcoat.2018.10.073 ↗
21. The influence of a KCl-rich environment on the corrosion attack of 304 L: 3D FIB/SEM and TEM investigations10.1016/j.corsci.2021.109315 ↗
22. Kinetics of high temperature oxidation and chromia volatilization for a binary Ni–Cr alloy10.1007/s11085-005-6562-8 ↗
23. High temperature corrosion resistance of FeCr(Ni, Al) alloys as bulk/overlay weld coatings in the presence of KCl at 600 °C10.1016/j.corsci.2022.110896 ↗
24. Isothermal oxidation of HVAF-sprayed Ni-based chromia, alumina and mixed-oxide scale forming coatings in ambient air10.1016/j.surfcoat.2017.03.017 ↗
25. Corrosion-resistant metallic coatings10.1016/S1369-7021(08)70203-7 ↗
26. Hiyam · 2021
27. Ramesh · 2014
28. Application of response surface methodolody to prediction of dilution in plasma transferred arc hardfacing of stainless steel on carbon steel10.1016/S1006-706X(09)60009-1 ↗
29. NiCrSiBC coatings: effect of dilution on microstructure and high temperature tribological behavior10.1016/j.wear.2016.01.015 ↗
30. The effects of substrate dilution on the microstructure and wear resistance of PTA Cu-Al-Fe aluminium bronze coatings
31. Dilution effect on the formation of amorphous phase in the laser cladded Ni–Fe–B–Si–Nb coatings after laser remelting process10.1016/j.apsusc.2012.04.144 ↗
32. Influence of dilution rate on the microstructure and properties of FeCrCoNi high-entropy alloy coating10.1016/j.matdes.2018.01.007 ↗
33. Dilution and microsegregation in dissimilar metal welds between super austenitic stainless steel and nickel base alloys10.1179/136217102225006804 ↗
34. Mechanism of breakaway oxidation of Fe–Cr and Fe–Cr–Ni alloys in dry and wet carbon dioxide
35. Oxidation of Fe–10Cr in O2 and in O2 + H2O environment at 600 °C: a microstructural investigation10.1016/j.corsci.2013.06.016 ↗
36. Breakaway phenomenon of Zr-based alloys during a high-temperature oxidation10.1016/j.jnucmat.2007.02.011 ↗
37. Effects of breakaway oxidation on local stresses in thermal barrier coatings10.1016/j.actamat.2009.10.028 ↗
38. Alkali induced high temperature corrosion of stainless steel: the influence of NaCl, KCl and CaCl210.1007/s11085-012-9293-7 ↗
39. The effects of KCl, K 2SO 4 and K 2CO 3 on the high temperature corrosion of a 304-type austenitic stainless steel10.1007/s11085-011-9240-z ↗
40. Chloridation and oxidation of iron, chromium, nickel and their alloys in chloridizing and oxidizing atmospheres at 400-700°C10.1016/S0010-938X(99)00142-0 ↗
41. The role of Cl- in the formation of the corrosion products and localised corrosion of 15Cr martensite stainless steel under an CO2-containing extreme oilfield condition10.1016/j.corsci.2021.109935 ↗
42. The effects of chlorides, hydrogen chloride, and sulfur dioxide in the oxidation of steels below deposits10.1016/0010-938X(95)00011-8 ↗
43. Secondary corrosion protection of FeCr(Al) model alloys at 600 °C – the influence of Cr and Al after breakaway corrosion10.1016/j.corsci.2021.109584 ↗
44. Point defects and cation tracer diffusion in (CrxFe1 - x)3 - δO4 spinels10.1016/0167-2738(95)00190-H ↗
45. Diffusion in oxides10.2138/rmg.2010.72.17 ↗
46. Oxidation of binary FeCr alloys (Fe–2.25Cr, Fe–10Cr, Fe–18Cr and Fe–25Cr) in O2 and in O2 + H2O environment at 600 °C10.1007/s11085-010-9229-z ↗
47. The long-term corrosion behavior of FeCrAl(Si) alloys after breakaway oxidation at 600 °C10.1016/j.corsci.2023.111155 ↗
48. The structure of the spinel group of crystals10.1080/14786440808635400 ↗
49. Oxidation of a Fe–18Cr–8Ni austenitic stainless steel at 850 °C in O2: microstructure evolution during breakaway oxidation10.1016/j.corsci.2016.10.029 ↗
50. Efficacy of an external chromia layer in reducing nitridation of high temperature alloys10.1016/j.corsci.2021.110050 ↗
51. Penetration of protective chromia scales by carbon10.1016/j.scriptamat.2014.01.009 ↗