Enhancement of the compressive performances of additive manufactured Corrax maraging stainless steel lattice by heat treatment
Source abstract
Abstract
The objective of this study was to investigate the influences of integrated solution and aging treatment (SAT) on the compressive properties of laser powder bed fusion (LPBF) Corrax maraging stainless steel lattices. Cubic and face-centered cubic with Z-axis strut (FCCZ) lattices were produced and used to formulate two types of functionally-graded material (FGM) lattices. The lattices with FGM directions parallel and vertical to the stress were designated as FGM-P and FGM-V lattices, respectively. The compressive performances and fracture mechanisms were identified experimentally by digital image correction and theoretically by finite element analysis. The results show that SAT can significantly increase the specific strengths of these lattices by 34–42 %. The compressive performances and fracture mode of the FGM-V sample principally corresponded to the rule of mixture. However, the FGM-P sample did not follow the rule of mixture because its deformation concentrated only in the cubic-dominated regions. Moreover, the SEAs of the cubic and FGM-P samples were respectively improved by 30 % and 19 % by SAT, given their higher compressive strength and stable stress–strain curve. SAT can be applied to further extend the future application of these materials as cost-effective, high-performance lightweight structural materials.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Metal additive manufacturing in aerospace: a review10.1016/j.matdes.2021.110008 ↗
2. Corrosion performance of additively manufactured stainless steel parts: a review
3. Material-structure-performance integrated laser-metal additive manufacturing10.1126/science.abg1487 ↗
4. Heterogeneous microstructure and mechanical behaviour of Al-8.3Fe-1.3V-1.8Si alloy produced by laser powder bed fusion10.1080/17452759.2022.2155197 ↗
5. Revealing the intensified preferred orientation and factors dominating the anisotropic mechanical properties of laser powder bed fusion Ti-6Al-4V alloy after heat treatment10.1016/j.jallcom.2023.169494 ↗
6. Mechanical properties and energy absorption of soft–hard dual phase lattice structures manufactured via selective laser melting10.1007/s12540-023-01502-x ↗
7. Microtextural characterization of additively manufactured SS316L after hot isostatic pressing heat treatment10.1007/s12540-021-01046-y ↗
8. Novel laser powder bed fusion Corrax maraging stainless steel lattice with superior specific strength and energy absorption10.1016/j.jmrt.2023.07.027 ↗
9. Post-heat treatment design for high-strength low-alloy steels processed by laser powder bed fusion10.1016/j.msea.2020.139531 ↗
10. Mechanical properties of laser-powder bed fusion processed Fe-15Cr-6Ni-6Mn multi-phase steel at room and cryogenic temperatures10.1007/s12540-023-01477-9 ↗
11. Controlling the Young's modulus of a β-type Ti-Nb alloy via strong texturing by LPBF10.1016/j.matdes.2022.110516 ↗
12. Identification of prior β grains of additive manufactured Ti-6Al-4V alloy using electron backscatter diffraction
13. Design exploration of staggered hybrid minimal surface magnesium alloy bone scaffolds10.1016/j.ijmecsci.2024.109566 ↗
14. Insight into the cracking mechanism of super-elastic NiTi alloy fabricated by laser powder bed fusion10.1080/17452759.2024.2368654 ↗
15. Design and development of SS316L-IN718 functionally graded materials via laser powder bed fusion10.1016/j.matlet.2023.134793 ↗
16. Additive manufacturing of SS316L/IN718 bimetallic structure via laser powder bed fusion10.3390/ma16196527 ↗
17. A novel methodology for the prediction of the stress–strain response of laser powder bed fusion lattice structure based on a multi-scale approach10.1016/j.msea.2022.144526 ↗
18. Multi-material additive manufacturing: a systematic review of design, properties, applications, challenges, and 3D printing of materials and cellular metamaterials10.1016/j.matdes.2023.111661 ↗
19. Additively manufactured open-cell porous biomaterials made from six different space-filling unit cells: the mechanical and morphological properties10.3390/ma8041871 ↗
20. Compressive fatigue properties of additive-manufactured Ti-6Al-4V cellular material with different porosities10.1016/j.msea.2020.139695 ↗
21. Effects of build orientation and heat treatment on the microstructure and mechanical properties of selective laser melted Ti6Al4V lattice structures
22. Improving the fatigue performance of porous metallic biomaterials produced by selective laser melting10.1016/j.actbio.2016.10.005 ↗
23. Uniaxial compression properties and compression fatigue performance of selective laser melted Ti-6Al-4V cellular structure10.1007/s12540-021-01021-7 ↗
24. Design methodology for functionally graded materials: framework for considering cracking
25. Performance evaluation of fatigue behavior in extrusion-based functionally graded materials10.1007/s00170-023-11922-z ↗
26. A mechanical property evaluation of graded density Al-Si10-Mg lattice structures manufactured by selective laser melting10.1016/j.msea.2016.06.013 ↗
27. Tailorable and predictable mechanical responses of additive manufactured TPMS lattices with graded structures10.1016/j.msea.2022.143109 ↗
28. Additive manufacturing of bio-inspired multi-scale hierarchically strengthened lattice structures10.1016/j.ijmachtools.2021.103764 ↗
29. Quasi-Static compressive responses and fatigue behaviour of Ti-6Al-4 V graded lattice structures fabricated by laser powder bed fusion10.1016/j.matdes.2021.110110 ↗
30. The novel hybrid lattice structure approach fabricated by laser powder bed fusion and mechanical properties comparison, 3D Print
31. Novel functionally-graded material design of additive manufactured Corrax maraging stainless steel lattice10.1016/j.matdes.2024.112940 ↗
32. Effect of selective laser melting process parameters on the microstructure and properties of a precipitation hardening stainless steel10.1016/j.matdes.2021.110265 ↗
33. Effects of manufacturing parameters, heat treatment, and machining on the physical and mechanical properties of 13Cr10Ni1·7Mo2Al0·4Mn0·4Si steel processed by laser powder bed fusion10.1016/j.msea.2021.142402 ↗
34. Effect of process parameters and heat treatment on the properties of stainless steel CX fabricated by selective laser melting10.1016/j.jallcom.2021.160062 ↗
35. Study of the microstructure and mechanical performance of C-X stainless steel processed by selective laser melting (SLM)10.1016/j.msea.2020.139227 ↗
36. Fatigue performance of stainless tool steel CX processed by laser powder bed fusion10.1016/j.msea.2022.143031 ↗
37. Quasi in-situ study of microstructure in a laser powder bed fusion martensitic stainless steel10.1007/s11661-024-07353-4 ↗
38. The synergic effects of heat treatment and building direction on the microstructure and anisotropic mechanical properties of laser powder bed fusion Corrax maraging stainless steel10.1016/j.msea.2023.145744 ↗
39. Corrosion resistance of 13wt.% Cr martensitic stainless steels: additively manufacturd CX versus wrought Ni-containing AISI 42010.1016/j.corsci.2021.109362 ↗
40. A hybrid additively manufactured martensitic-maraging stainless steel with superior strength and corrosion resistance for plastic injection molding dies
41. Improved mechanical properties and energy absorption of Ti6Al4V laser powder bed fusion lattice structures using curving lattice struts10.1016/j.matdes.2021.110140 ↗
42. Mechanical behavior of CuZrAl bulk metallic glass scaffolds fabricated by selective laser melting10.1016/j.matlet.2023.134242 ↗
43. Understanding contribution of microstructure to fracture behaviour of sintered steels10.1179/1743290114Y.0000000119 ↗
44. Load distribution and damage evolution in bending and stretch dominated Ti-6Al-4V cellular structures processed by selective laser melting10.1016/j.ijfatigue.2018.12.017 ↗
45. The effects of microstructures on the mechanical performances and fracture mechanisms of boron-alloyed ferritic and martensitic stainless steels fabricated by powder metallurgy10.1016/j.msea.2023.144680 ↗
46. Mechanical properties and fracture mechanism of boron-containing 304L austenitic stainless steel densified by liquid phase sintering10.1016/j.msea.2021.141182 ↗
47. Yield behavior of open-cell rhombic dodecahedron Ti–6Al–4 V lattice at elevated temperatures10.1016/j.ijmecsci.2016.07.006 ↗
48. Finite element modelling of the compressive response of lattice structures manufactured using the selective laser melting technique10.1016/j.ijmecsci.2012.12.004 ↗
49. Large deformation response of additively-manufactured FCC metamaterials: from octet truss lattices towards continuous shell mesostructures10.1016/j.ijplas.2017.02.003 ↗
50. Enhancing specific energy absorption of additively manufactured titanium lattice structures
51. Regulated multi-scale mechanical performance of functionally graded lattice materials based on multiple bioinspired patterns10.1016/j.matdes.2022.111564 ↗
52. Compression property, deformation behavior, and fracture mechanism of additive-manufactured Ti-6Al-4V cellular solid with a new cuboctahedron structure10.1007/s11661-020-06013-7 ↗
53. Additive manufacturing of an Fe–Cr–Ni–Al maraging stainless steel: microstructure evolution, heat treatment, and strengthening mechanisms10.1016/j.msea.2020.139470 ↗
54. Influence of microdefect on mechanical behaviors of CX stainless steel produced by selective laser melting