Effect of melt temperature on the quasi-equilibrium solidification of K465 Ni-based superalloy
Source abstract
Abstract
The solidification process of Ni-based superalloy K465 was examined using DTA and X-ray diffraction. The impact of melt structure on solidification process and the morphology of MC carbide and γ′-phase was analyzed. It was observed that an increase in melt peak temperature led to a significant decrease in precipitation temperature for carbides, but only a slight increase in the formation temperature of matrix and eutectic microstructure. The X-ray diffraction results showed that some ordered structures were detected in the sample with melt peak temperature of 1450 °C and 1500 °C, but not in the sample with melt peak temperature of 1360 °C. Furthermore, the ordered structure displayed similar crystalline features with M6C carbide. As the melt peak temperature increased, the carbides changed from block type to script type morphology. This phenomenon was likely caused by the formation of ordered structures at high temperatures. However, the microstructure of γ matrix and γ′ precipitates remained unaffected by the melt peak temperature.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Solidification and crystal growth phenomena · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Dislocation climbing dominated decomposition and fracture of carbides in a Ni-based superalloy10.1016/j.actamat.2023.118669 ↗
2. Morphology evolution of r' phase in K465 superalloy during prolonged aging10.1016/j.msea.2006.12.041 ↗
3. Preparation, microstructure, and mechanical behaviour of Ni3Al-based superalloy reinforced with carbide particles10.1016/j.intermet.2022.107667 ↗
4. Analysis of grain boundary character in a fine-grained nickel-based superalloy 71810.1007/s11665-014-1172-8 ↗
5. The morphology and characteristics evolution of MC carbide during homogenization in hard-to-deform superalloy GH497510.1016/j.jallcom.2022.167086 ↗
6. Relative stability of carbides and their effects on the properties of K465 superalloy10.1016/j.msea.2006.05.091 ↗
7. Temperature dependence of MC depcomposition behavior in Ni-base superalloy GTD11110.1016/j.msea.2007.06.010 ↗
8. Effect of carbon addtions on the as-cast microstructure and defect formation of a single crystal Ni-based superalloy10.1016/j.msea.2004.01.030 ↗
9. Decomposition of primary MC carbides and its effect on the fracture behaviores of a cast Ni-base superalloy10.1016/j.msea.2007.07.055 ↗
10. Effect of melt superheat treatment on solidification behavior and microstructure of new Ni–Co based superalloy10.1016/j.jmrt.2021.10.122 ↗
11. The influence of melt superheating treatment on the cast structure and stress rupture property of IN718C superalloy10.1016/j.jallcom.2017.02.210 ↗
12. Microstructure evolution of directionally solidified DZ125 superalloy with melt superheating treatment10.1016/j.jallcom.2010.08.086 ↗
13. Refined dendrite and precise orientation of nickel-based monocrystal superalloy with melt superheating treatment10.1142/S0217979209060531 ↗
14. Crystal structure of NaCl-type transition metal monocarbides MC (M=V, T, Nb, Ta, Hf, Zr), a neutron powder diffraction study10.1016/j.mseb.2007.09.040 ↗
15. Growth morphology and mechanism of MC carbide under quasi-rapid solidification conditions10.1016/S1468-6996(01)00044-4 ↗
16. MC morphology in a directional solidified nickel-based superalloy10.1016/0167-577X(93)90126-I ↗
17. Effect of solidification parameters on the growth geometry of MC carbide in IN-100 dendritic monocrystals10.1007/BF02661809 ↗
18. Effect of solidification condition on MC carbides in a nickel-base superalloy in 738LC10.1016/0956-716X(94)90434-0 ↗
19. Effect of melt heat treatment on MC carbide formation in nickel-based superalloy K46510.1016/j.rinp.2017.06.020 ↗
20. Effect of melt treatment on carbides formation in a cast nickel-base superalloy M96310.1016/j.jmatprotec.2006.11.002 ↗
21. Effect of melt superheating treatment on the cast structure of K465 nickel-based superalloy10.1007/s12598-009-0038-y ↗
22. Effect of thermal histroy on the liquid structure of a cast nickel-base superalloy M96310.1016/S0925-8388(03)00497-3 ↗
23. Effects of melt treatment on the cast structure of M963 superalloy10.1016/S1359-6462(02)00446-3 ↗
24. Solidification rate driven microstructural stability and its effect on the creep property of a polycrystalline nickel-based superalloy K46510.1016/j.msea.2019.138530 ↗
25. Effect of carbides on the creep properties of a Ni-base superalloy M96310.1016/j.msea.2005.02.038 ↗
26. High-temperature creep-deformation behavior of the Ni-based superalloy M96310.1007/s11661-005-0111-6 ↗
27. Medium-range order and viscosity of molten Cu-23%Sn alloy10.1016/S0167-577X(02)01120-5 ↗
28. Medium-range structural order in covalent amorphous solids10.1038/354445a0 ↗
29. First-order liquid–liquid phase transition in AsS melt caused by change of intermediate-range order10.1016/j.jnoncrysol.2014.08.021 ↗
30. A first-order liquid-liquid phase transition in phosphorus10.1038/35003143 ↗
31. High-temperature abnormal behavior of resistivities for Bi-In melts10.1016/j.physleta.2004.06.089 ↗
32. Temperature dependence of liquid strctures in In-Sn20 diffraction experimental evidence10.1016/j.physleta.2004.03.014 ↗
33. X-ray diffraction experiments on the solidification process of Cu80Ag20 alloy10.1016/j.physleta.2006.04.079 ↗
34. X-ray diffraction experiments on In30Sn70 from normal liquid to solidus10.1016/j.physleta.2006.03.077 ↗
35. Effect of prenucleation clusters arising from liquid-liquid phase transition on nucleation in a one-component charged colloidal suspension10.1016/j.jcis.2020.12.088 ↗
36. Effect of solidification condition and carbon content on the morphology of MC carbide in directionally solidified nickel-base superalloys10.1016/j.jmst.2014.06.010 ↗
37. Effect of withdrawal rate on precipitation characteristics of MC-type carbides in a nickel-based directionally solidified superalloy with high Re content10.1016/j.vacuum.2020.109800 ↗