Effect of cooling methods on the tribological, oxidation and corrosion properties of CeO2 composite boronizing coatings on 4Cr5MoSiV1 steel
Source abstract
Abstract
The cooling method has a very important effect on the microstructure and properties of the boride layer. In this study, a rare earth-Cr composite boronizing method to prepare boride ceramic coatings on 4Cr5MoSiV1 alloy steel was used. The samples were then cooled by four different methods: water cooling (WC, 450 °C /s), furnace cooling (FC, 5 °C /min), air cooling (AC, 20 °C /s), and FC with 500°C holding 2h (HFC, two-stage cooling, 5 °C /min). The effects and mechanisms of these cooling methods on the microstructure, hardness, wear, high temperature oxidation, and corrosion properties of boride layers were investigated. The results showed that the boride layer was composed of FeB, Fe2B, CrB and Cr2B phases. Sample WC with the faster cooling rate had the highest surface hardness of 1724.21 HV, but cracks penetrating the boride layer were observed. In the friction wear test, sample HFC has the lowest coefficient of friction and wear rate, with the surface wear mechanism being oxidative wear. In addition, sample HFC formed a closed and complete oxide film on the surface, showing excellent high temperature oxidation resistance. Sample FC shows good corrosion resistance in acid and alkali corrosion immersion tests.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Metal Alloys Wear and Properties · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. Combined effects of cryogenic treatment and tempering on microstructural and tribological features of AISI H13 steel10.1016/j.matchemphys.2022.126802 ↗
2. Current failure mechanisms and treatment methods of hot forging tools (dies)-a review10.1016/j.engfailanal.2021.105678 ↗
3. Comprehensive review of methods for increasing the durability of hot forging tools10.1016/j.promfg.2020.04.280 ↗
4. Microstructure and tribological performance of boride layers on ductile cast iron under dry sliding conditions10.1016/j.engfailanal.2022.106080 ↗
5. Revealing the nano-grained microstructure and mechanical properties of electrochemical boronized AlCoCrFeNi2. 1 eutectic high entropy alloy10.1016/j.jallcom.2022.168515 ↗
6. Tribological investigations of boride layers on Ti6Al4V at room and elevated temperatures10.1108/ILT-07-2022-0218 ↗
7. Effect of boronizing composition on boride layer of boronized GGG-60 ductile cast iron10.1016/j.vacuum.2016.01.021 ↗
8. Microstructure and wear properties of powder-pack borided Ti–5Al–2.5 Sn alloy10.1016/j.jmrt.2023.02.052 ↗
9. Characteristics of boronized Ti6Al4V alloy using boric acid based boronizing mixture10.1016/j.matchar.2022.112180 ↗
10. Surface strengthening using a self-protective diffusion paste and its application for ballistic protection of steel plates10.1016/j.matdes.2009.03.003 ↗
11. Tribological behavior of boronized Fe40Mn20Cr20Ni20 high-entropy alloys10.3390/met11101561 ↗
12. Investigation on the robust boronizing strategy for the surface strengthening of CoCrNi medium-entropy alloy10.1016/j.surfcoat.2022.128844 ↗
13. Insight into tribocorrosion resistance and tribofilm formation on titanium boride coatings in a phosphate buffer saline solution10.1016/j.jmrt.2023.11.105 ↗
14. Effect of carbon content and boronizing parameters on growth kinetics of boride layers obtained on carbon steels10.3390/ma15051858 ↗
15. Growth kinetics and corrosion properties of pack-borided Ti-5Al-2.5 Sn alloy10.1016/j.surfcoat.2023.130003 ↗
16. Tribological behavior of boronized Al0. 1CoCrFeNi high-entropy alloys under dry and lubricated conditions
17. The effects of boriding process on tribological properties and corrosive behavior of a novel high manganese steel10.1016/j.jmatprotec.2021.117421 ↗
18. Micro-abrasion/corrosion behavior of pack-borided AISI 316L steel and ASTM F1537 CoCrMo alloy in ceramic-on-ceramic couplings10.1007/s11665-021-05641-3 ↗
19. Evaluation of boride layers on C70W2 steel using a new approach to characterization of boride layers10.3390/ma15113891 ↗
20. Enhanced boronizing kinetics and high temperature wear resistance of H13 steel with boriding treatment assisted by air blast shot peening10.1016/j.surfcoat.2016.09.029 ↗
21. Investigation of high temperature dry sliding behavior of borided H13 hot work tool steel with nanoboron powder10.1016/j.surfcoat.2018.10.066 ↗
22. Friction and reciprocating wear behavior of borided AISI H13 steel under dry and lubricated conditions10.1007/s11665-020-04957-w ↗
23. Experimental evaluation and modelling of the boronizing kinetics of AISI H13 hot work tool steel10.1515/mt-2021-0056 ↗
24. Enhancement of tribo-corrosion performance of carbon steel through boronizing and BN-based coatings10.1016/j.triboint.2020.106666 ↗
25. Corrosion properties of ceramic coating on pure titanium by pack boronizing with Nd2O310.1016/j.ceramint.2023.01.093 ↗
26. Characteristics of surface layers on Ti6Al4V alloy borided with CeO2 near the transition temperature10.1016/j.jallcom.2018.07.365 ↗
27. Compound boronizing and its kinetics analysis for H13 steel with rare earth CeO2 and Cr2O310.3390/app12073636 ↗
28. Characteristics, high temperature wear and oxidation behavior of boride layer grown on nimonic 80A Ni-based superalloy10.1016/j.surfcoat.2021.126906 ↗
29. Properties and high temperature dry sliding wear behavior of boronized Inconel 71810.1007/s11661-019-05577-3 ↗
30. Effect of refractory elements on boronizing properties of the CoCrFeNi high entropy alloy10.1016/j.ijrmhm.2020.105418 ↗
31. Surface strengthening and self-lubrication enhancement of CoCrNi medium-entropy alloy by powder-pack boronizing
32. Mechanical properties, wear, and corrosion of boronized N80 tube steel10.1007/s11003-012-9479-9 ↗
33. Hard iron boride (Fe2B) on 99.97 wt% pure iron10.1016/j.vacuum.2006.01.022 ↗
34. Effect of tempering conditions on wear resistance in various wear mechanisms of H13 steel10.1016/j.triboint.2011.03.005 ↗
35. Microstructure and mechanical properties of Cr14 ultra-high-strength steel at different tempering temperatures around 773 K10.1016/j.msea.2017.05.060 ↗
36. Effect of alloying elements on the high-temperature tempering of Fe-0.3 N martensite10.1016/j.actamat.2020.116612 ↗
37. Tribological, oxidation and corrosion properties of ceramic coating on AISI H13 steel by rare earth-Cr composite boronizing10.1016/j.ceramint.2023.12.193 ↗
38. The VDI 3198 indentation test evaluation of a reliable qualitative control for layered compounds10.1016/S0924-0136(03)00300-5 ↗
39. Investigation of surface modifications for combating the molten aluminum corrosion of AISI H13 steel10.1016/j.corsci.2020.108836 ↗
40. Low temperature boronizing of surface nanostructured Ni-Cr-Mo steel using SMAT10.4028/www.scientific.net/MSF.830-831.663 ↗
41. Characterization of boronized layers on Vanadis 6 tool steel10.1080/02670844.2020.1781377 ↗
42. Boride layers on sverker 3 steel: kinetic modeling, experimental characterization, and validation
43. Characterization and boron diffusion kinetics on the surface-hardened layers of Royalloy steel10.3390/coatings13010113 ↗
44. Pack boronizing of AISI H11 tool steel: role of surface mechanical attrition treatment10.1016/j.vacuum.2013.04.006 ↗
45. Formation of boride layers at the Fe–10% Cr alloy–boron interface10.1016/j.jallcom.2005.02.033 ↗
46. Formation of boride layers at the Fe–25% Cr alloy–boron interface10.1007/s10853-006-0032-9 ↗
47. Plasma paste boronizing of AISI 8620, 52100 and 440C steels10.1016/j.matdes.2010.11.031 ↗
48. Formation and kinetics of FeB/Fe2B layers and diffusion zone at the surface of AISI 316 borided steels10.1016/j.surfcoat.2010.06.068 ↗
49. Characterizations and kinetic modelling of boride layers on bohler K190 steel10.3390/coatings13061000 ↗
50. The impact of post-treatments on the brittleness and wear resistance of borided 8% Cr steel10.1016/j.matchemphys.2023.128719 ↗
51. Modelling boron diffusion for Fe2B layer formation: comparative kinetics analysis in pack-boronized AISI 4147 steel10.1515/mt-2023-0214 ↗
52. Literature review of heat treatment simulations with respect to phase transformation, residual stresses and distortion10.1034/j.1600-0692.2000.d01-6.x ↗
53. The genesis of friction10.1016/0043-1648(81)90315-X ↗
54. Bowden · 2001
55. Microstructural, wear and corrosion characteristics of boronized AISI 904L superaustenitic stainless steel10.1016/j.vacuum.2021.110145 ↗
56. Effect of boronizing on microstructure, high-temperature wear and corrosion behavior of additive manufactured Inconel 71810.1016/j.matchar.2022.112155 ↗
57. Analysis for wear behaviors of oxidative wear10.1007/s11249-010-9741-y ↗
58. Reducibility of oxides and sulphides in metallurgical processes
59. Microstructure and high-temperature oxidation behaviors of surface layer on TA2 pure titanium by boriding and aluminizing two-steps method10.1016/j.ceramint.2021.11.109 ↗
60. High temperature oxidation behavior of C103 alloy with boronized and siliconized coatings during 1000 h at 1100° C in air10.1016/j.surfcoat.2019.04.019 ↗
61. Oxidschichtbildung und gleichzeitige Gefügeänderung der Verbindungsschicht10.1515/htm-1992-470313 ↗
62. Fe3O4 surface electronic structures and stability from GGA+ U10.1016/j.susc.2012.02.003 ↗
63. Effect of boronizing treatment on the oxidation resistance of Zr2 (AlSi) 4C5/SiC composite10.1016/j.corsci.2019.108201 ↗
64. Atomic structure of the Fe3O4/Fe2O3 interface during phase transition from hematite to magnetite10.1021/acs.inorgchem.3c01653 ↗
65. High-temperature oxidation behavior of Al-modified boronized coating prepared on Ti-6Al-4V by thermal diffusion10.1007/s11665-020-05170-5 ↗
66. Oxidation kinetics of boronized low carbon steel AISI 101810.1007/s11085-008-9123-0 ↗
67. Corrosion behaviour of 6063 aluminium alloy in acidic and in alkaline media10.1016/j.arabjc.2013.07.059 ↗
68. Development of the electrochemical theory of metallic corrosion10.5006/0010-9312-20.1.7t ↗
69. Corrosion behavior of boronized and borochromized AISI 4140 steel after acid exposure evaluated by electrochemical impedance spectroscopy
70. Corrosion behavior of an equiatomic CoCrFeMnNi high-entropy alloy compared with 304 stainless steel in sulfuric acid solution10.1016/j.corsci.2018.02.031 ↗
71. Passive films on stainless steels—chemistry, structure and growth10.1016/S0013-4686(02)00841-1 ↗
72. The role of alloyed molybdenum in the inhibition of pitting corrosion in stainless steels10.1016/S0010-938X(00)00086-X ↗
73. Comparison of corrosion behaviour of zinc in NaCl and in NaOH solutions. Part I: corrosion layer characterization10.1016/j.corsci.2010.08.003 ↗
74. Erosion–corrosion of mild steel in hot caustic. Part I: NaOH solution10.1016/j.corsci.2005.09.018 ↗