Adiabatic shear bands produced in a metallic armor, after dynamic compression with a Hopkinson pressure bar
Source abstract
Abstract
A Brazilian high hardness armor (HHA) steel was, for the first time dynamically tested and microstructurally analyzed for the occurrence of shear bands. The HHA was initially quenched at 910 °C for 10 min and tempered at 310, 425 and 610 °C for 1 h to produce different microstructures as well as phases and precipitates. After characterizing the microstructures, a dynamic compression test on a Hopkinson bar was performed on special samples to simulate high deformation rate in a ballistic impact. Then, a search for adiabatic shear bands, using scanning electron microscopy (SEM) equipped with energy dispersive spectroscopy (EDS) was performed on the impacted samples. The transformed shear bands generated were characterized by X-ray diffraction (XRD) and electron backscattering diffraction (EBSD). The results showed that the microstructure generated in the tempering heat treatment at 310 °C is the most susceptible to the appearance of shear bands. In addition, it can be indicated that the formation of these band is related to a possible dynamic recrystallization mechanism.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · High-pressure geophysics and materials · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Adiabatic shear band development and following failure in 316L fabricated by an additive manufacturing process10.1016/j.msea.2021.141003 ↗
2. A new dynamic recrystallization mechanism in adiabatic shear band of an α/β dual phase titanium alloy: composition redistribution10.1016/j.scriptamat.2021.114229 ↗
3. Microstructure, texture, and fracture of pure magnesium adiabatic shear band under high strain rate compression10.1016/j.msea.2021.141632 ↗
4. Enhanced dynamic mechanical properties and resistance to the formation of adiabatic shear band by Cu-rich nano-precipitates in high-strength steels10.1016/j.ijplas.2020.102924 ↗
5. Incipient dynamic recrystallization and adiabatic shear bands in Ti–7Al studied via in situ X-ray diffraction10.1016/j.ijplas.2021.102992 ↗
6. Damage mechanism in high hardness armor (HHA) steel subjected o V50 ballistic impact
7. Microstructure evolution associated with adiabatic shear bands and shear band failure in ballistic plug formation in Ti–6Al–4V targets10.1016/j.msea.2009.03.051 ↗
8. The ballistic performance of an ultra-high hardness armour steel: an experimental investigation10.1016/j.ijimpeng.2016.03.011 ↗
9. Combined stability analysis of phase-field dynamic fracture and shear band localization10.1016/j.ijplas.2017.04.018 ↗
10. Experimental investigation on the dynamic flow behaviour and structure-property correlation of dual-phase high carbon steel at elevated temperatures10.1016/j.msea.2019.138655 ↗
11. Effect of tempering conditions on adiabatic shear banding during dynamic compression and ballistic impact tests of ultra-high-strength armor steel10.1016/j.msea.2020.139818 ↗
12. Effect of strain rate upon plastic flow of steel10.1063/1.1707363 ↗
13. The structure of adiabatic shear bands in metals: a critical review10.1016/0001-6160(87)90238-0 ↗
14. A Systematic Study of grain refinement during impact of 4340 steel10.1016/j.msea.2014.03.066 ↗
15. A microstructural investigation of adiabatic shear bands in an interstitial free steel10.1016/j.msea.2006.12.019 ↗
16. Effect of microstructure on the nucleation and initiation of adiabatic shear bands (ASBs) during impact10.1016/j.msea.2014.07.095 ↗
17. Statistical variability and fragility assessment of ballistic perforation of steel plates for 7.62 mm AP ammunition10.1016/j.dt.2019.10.013 ↗
18. Study of the formation of adiabatic shear bands in steels10.1016/S0924-0136(01)00952-9 ↗
19. Effect of metallurgical parameters on shear band formation in low-carbon (∼ 0.20 WtPct) steels10.1007/BF02647311 ↗
20. Some Factors influencing adiabatic shear banding in impact wear10.1016/S0043-1648(97)00238-X ↗
21. On adiabatic shear fracture in high-speed machining of martensitic precipitation-hardening stainless steel10.1016/j.jmatprotec.2016.03.010 ↗
22. Understanding of adiabatic shear band evolution during high-strain-rate deformation in high-strength armor steel10.1016/j.jallcom.2020.155540 ↗
23. The influence of the microstructure of an HHA steel on the formation of adiabatic shear bands, after high deformation rates
24. 2008
25. Bhadeshia · 2017
26. A review of the thermal stability of metastable austenite in steels: martensite formation10.1016/j.jmst.2021.03.020 ↗
27. 2014
28. Carbide precipitation in Nb-V-Ti microalloyed ultra-high strength steel during tempering10.1016/j.msea.2016.12.019 ↗
29. Vander Voort · 2004
30. Effect of prior heat treatment on the dynamic impact behavior of 4340 steel and formation of adiabatic shear bands10.1016/j.msea.2011.08.036 ↗
31. Effect of impurities on adiabatic shear bands (ASB) formation and evolution in U-2.5 wt% Nb alloy under impact10.1016/j.jnucmat.2019.01.054 ↗
32. Cullity · 1998
33. Meyers · 1994
34. Microstructural evolution in adiabatic shear localization in stainless steel10.1016/S1359-6454(02)00526-8 ↗