Formation of optical dark area (ODA) on high-cycle fatigue fracture surface of Al–Cu–Mg alloy at atmosphere induced by inner friction
Source abstract
Abstract
The formation of optical dark area (ODA) on high-cycle fatigue fracture surface of Al alloys at atmosphere is very common and questionable in the engineering fields. Herein, we discovered that the oxygen induced inner friction causes the serious Cu element segregation in the form of nanoparticles on the fatigue fracture surface at atmosphere, which forms the ODA in Al–Cu–Mg alloy. By increasing stress ratio or applying Vaseline coatings fatigue tests, the ODA can be absolutely eliminated simultaneously with a significant extension of their fatigue lives.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Recent developments in advanced aircraft aluminium alloys10.1016/j.matdes.2013.12.002 ↗
2. Observations of oxide films on fatigue fracture surfaces of a sintered 2xxx series aluminium alloy10.1016/j.msea.2006.11.012 ↗
3. Small crack growth model from low to very high cycle fatigue regime for internal fatigue failure of high strength steel10.1016/j.ijfatigue.2016.04.016 ↗
4. Investigation of crack initiation mechanisms responsible for the fish eye formation in the very high cycle fatigue regime10.1016/j.ijfatigue.2018.06.016 ↗
5. Propensities of crack interior initiation and early growth for very-high-cycle fatigue of high strength steels10.1016/j.ijfatigue.2013.02.023 ↗
6. On the mechanism of fatigue failure in the superlong life regime (N>107 cycles). Part 1: influence of hydrogen trapped by inclusions10.1046/j.1460-2695.2000.00328.x ↗
7. Subsurface crack initiation and propagation mechanism in high-strength steel in a very high cycle fatigue regime10.1016/j.ijfatigue.2005.08.015 ↗
8. Microscopic and nanoscopic observations of metallurgical structures around inclusions at interior crack initiation site for a bearing steel in very high-cycle fatigue10.1111/ffe.12344 ↗
9. General strategy toward dual-scale-controlled metallic micro–nano hybrid structures with ultralow reflectance10.1021/acsnano.7b03673 ↗
10. Leygraf · 2016
11. Cu/Cu2O/CuO nanoparticles: novel synthesis by exploding wire technique and extensive characterization10.1016/j.apsusc.2016.09.005 ↗
12. The formation mechanism of characteristic region at crack initiation for very-high-cycle fatigue of high-strength steels10.1016/j.ijfatigue.2015.11.029 ↗
13. The fatigue crack behaviour of 2524-T3 aluminium alloy in Al2O3 particle environments10.1111/ffe.13307 ↗
14. Acceleration effect of a graphite dust environment on the fatigue crack propagation rates of Al alloy10.1016/j.ijfatigue.2019.04.033 ↗
15. The fatigue crack behaviour of 7N01-T6 aluminium alloys in different particle environments10.1007/s43452-020-00131-0 ↗
16. Buckley · 1981
17. Liu · Int J Fatig · 2016 · 84 · 10410.1016/j.ijfatigue.2015.11.023 ↗
18. Strain-induced dissolution of Cu–Mg co-clusters and dynamic recrystallization near a fatigue crack tip of an underaged Al–Cu–Mg alloy during cyclic loading at ambient temperature10.1016/j.scriptamat.2011.03.012 ↗
19. Suresh · 1998
20. Aylward · 1985
21. Recent developments in advanced aircraft aluminium alloys10.1016/j.matdes.2013.12.002 ↗
22. Comparative study on microstructures and mechanical properties of the heat-treated Al-5.0Cu-0.6Mn-xFe alloys prepared by gravity die casting and squeeze casting10.1016/j.msea.2013.09.043 ↗
23. Suresh · 1998
24. Cyclic hardening and fatigue of copper single crystals