Microstructure evolution and properties of semi-solid Al80Mg5Li5Zn5Cu5 light weight high entropy alloy prepared by SIMA
Source abstract
Abstract
The semi-solid Al 80 Mg 5 Li 5 Zn 5 Cu 5 light weight high entropy alloys were prepared by strain induced melting activation method (SIMA), and the microstructure evolution, mechanical properties and corrosion resistance of semi-solid Al 80 Mg 5 Li 5 Zn 5 Cu 5 light weight high entropy alloys were investigated. The results indicate that the ideal globular or near-globular microstructures with an average grain size of 29.1 μm and a shape factor of 0.86 can be obtained when the Al 80 Mg 5 Li 5 Zn 5 Cu 5 light weight high entropy alloys with 20% deformation held at 500 °C for 15 min. The coarsening coefficient is 35.8 μm 3 /s when the temperature is 500 °C, which is lower than the traditional single major element alloys due to the sluggish diffusion effect of high entropy alloys. The compression strength of semi-solid Al 80 Mg 5 Li 5 Zn 5 Cu 5 light weight high entropy alloys is 558.4 MPa, which is 11% higher than that of as-cast state. The corrosion resistance of semi-solid Al 80 Mg 5 Li 5 Zn 5 Cu 5 light weight high entropy alloys is also significantly improved.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Behavior of metal alloys in the semisolid state10.1007/BF02661090 ↗
2. Effects of temperature and time on three-dimensional microstructural evolution of semi-solid 2A14 aluminum alloy during short process preparation of semi-solid billets10.1016/S1003-6326(22)65933-8 ↗
3. The influence of strontium on microstructural and rheological behavior of the semi-solid A380 aluminum alloy [J]. Metallurgical and Materials Transaction A-Physical Metallurgy and
4. Effect of La addition on semi-solid microstructure evolution of Mg-7Zn magnesium alloy10.1007/s41230-022-1191-2 ↗
5. The effects of annular electromagnetic stirring parameters on microstructure evolution of rheocast AZ91 magnesium alloy10.1016/j.jmrt.2019.03.009 ↗
6. Microstructure evolution and mechanical properties of semi-solid Thixotropic reverse extrusion tin bronze
7. Multicomponent and high entropy alloys10.3390/e16094749 ↗
8. A novel bulk eutectic high-entropy alloy with outstanding as-cast specific yield strengths at elevated temperatures10.1016/j.scriptamat.2021.114132 ↗
9. New advances in high-entropy alloys10.3390/e22101158 ↗
10. Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off10.1038/nature17981 ↗
11. Additively manufactured fine grained Ni6Cr4WFe9Ti high entropy alloys with high strength and ductility
12. Mechanical properties and microstructure of a NiCrFeCoMn high-entropy alloy deformed at high strain rates10.3390/e20110892 ↗
13. Effect of molybdenum content on the microstructure and corrosion behavior of FeCoCrNiMox high-entropy alloys10.1016/j.jmst.2019.10.020 ↗
14. Improvement in oxidation resistance of Cantor alloy through microstructure tailoring10.1007/s41230-022-2031-0 ↗
15. Prediction of the phase composition of high-entropy alloys based on Cr-Nb-Ti-V-Zr using the calphad method10.1134/S0031918X19040069 ↗
16. A novel low-density, high-hardness, high-entropy alloy with close-packed single-phase nanocrystalline Structures10.1080/21663831.2014.985855 ↗
17. Phase stability of low-density, multiprincipal component alloys containing aluminum, magnesium, and lithium
18. Semi-solid processing of the CoCrCuFeNi high entropy alloy10.1016/j.matdes.2017.01.082 ↗
19. The microstructural evolution and hardness of the equiatomic CoCrCuFeNi high-entropy alloy in the semi-solid state10.1016/j.jallcom.2018.02.170 ↗
20. Microstructure evolution and formation mechanism of CoCrCu1.2FeNi high entropy alloy during the whole process of semi-solid billet preparation10.1016/j.jmst.2021.12.044 ↗
21. Investigation on microstructures and properties of semi-solid Al80Mg5Li5Zn5Cu5 light-weight high-entropy alloy during isothermal heat treatment process10.1007/s41230-022-2069-z ↗
22. Effects of process parameters on the microstructure and hardness of semi-solid AlSi9Mg aluminum alloy prepared by RAP process10.2320/matertrans.MT-M2020088 ↗
23. The semi-solid microstructural evolution and coarsening kinetics of AZ80-0.2Y-0.15Ca magnesium alloy10.1016/j.matchar.2019.05.019 ↗
24. Research on AlSi7Mg alloy semi-solid billet fabricated by RAP
25. Isothermal grain coarsening of spray formed alloys in the semi-solid state10.1016/S1359-6454(02)00080-0 ↗
26. Microstructure evolution of semisolid Mg-2Zn-0.5Y alloy during isothermal heat treatment10.1016/S1875-5372(16)30155-2 ↗
27. Electrochemical behaviour of laser solid formed Ti-6Al-4V alloy in a highly concentrated NaCl solution10.1016/j.corsci.2018.07.023 ↗
28. Mechanical properties and corrosion behavior of novel Al-Mg-Zn-Cu-Si lightweight high entropy alloys10.1016/j.jallcom.2021.163508 ↗
29. Microstructure and corrosion resistance of laser in-situ synthesized NiTi-based composite coating