Effects of Fe on microstructure and mechanical properties of CoCrNiFeAl multi-principle elements alloys
Source abstract
Abstract
Precipitation and twinning strengthening mechanisms have been extensively investigated to improve the yield strength and ductility of face-centered cubic (FCC) multi-principle elements alloys (MPEAs). Compared with well-studied Al0.3CoCrFeNi in CoCrFeNi system, the microstructure and mechanical properties of a new designed CoCrNiFe0.62Al0.38 MPEA with lower Fe content were evaluated by transmission electron microscopy and tensile tests, respectively. Higher volume fraction of B2 nanoprecipitates and early deformation twining within FCC matrix were proposed to play key roles in improving the synergy strength and ductility of the AlCoCrFeNi system. The experimental results presented herein not only provide insight into how transition metal element affect precipitation and twining process of B2 phase reinforced FCC MPEAs, but also demonstrate useful guidance for the development of precipitation hardened CoCrFeNi system other than adjusting conventional elements such as Al, Ti, Ta, etc.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. A dual-phase alloy with ultrahigh strength-ductility synergy over a wide temperature range10.1126/sciadv.abi4404 ↗
2. Dual heterogeneous structures lead to ultrahigh strength and uniform ductility in a Co-Cr-Ni medium-entropy alloy10.1038/s41467-020-16085-z ↗
3. Lightweight, ultrastrong and high thermal-stable eutectic high-entropy alloys for elevated-temperature applications10.1016/j.actamat.2023.118806 ↗
4. Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation10.1016/j.actamat.2015.06.025 ↗
5. Enhanced pitting corrosion resistance of CoCrFeMnNi high entropy alloy in the presence of Desulfovibrio vulgaris via nitrogen doping10.1016/j.jmst.2022.08.021 ↗
6. Unusually high corrosion resistance in MoxCrNiCo medium entropy alloy enhanced by acidity in aqueous solution10.1016/j.jmst.2022.07.061 ↗
7. The comparison of the corrosion behavior of the CrCoNi medium entropy alloy and CrMnFeCoNi high entropy alloy10.1016/j.apsusc.2022.154171 ↗
8. Origin of radiation resistance in multi-principal element alloys10.1038/s41598-018-34486-5 ↗
9. Radiation-assisted chemical short-range order formation in high-entropy alloys10.1016/j.scriptamat.2022.114547 ↗
10. Strengthening of high-entropy alloys via modulation of cryo-pre-straining-induced defects10.1016/j.jmst.2022.04.055 ↗
11. Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys10.1016/j.pmatsci.2018.12.003 ↗
12. High entropy alloys: a focused review of mechanical properties and deformation mechanisms10.1016/j.actamat.2019.12.015 ↗
13. Nano-graining a particle-strengthened high-entropy alloy10.1016/j.scriptamat.2018.12.033 ↗
14. Gradient hierarchical grain structures of Al0.1CoCrFeNi high-entropy alloys through dynamic torsion10.1016/j.matlet.2018.11.176 ↗
15. Design of non-equiatomic high entropy alloys with heterogeneous lamella structure towards strength-ductility synergy10.1016/j.scriptamat.2018.05.020 ↗
16. Achieving high strength and deformability in a high entropy alloy containing the multiscale phase structure10.1016/j.mtnano.2022.100263 ↗
17. Excellent strength-ductility combination in Co36Cr15Fe18Ni18Al8Ti4Mo1 multi-principal element alloys by dual-morphology B2 precipitates strengthening10.1016/j.jmst.2022.07.002 ↗
18. Enhanced strength-ductility synergy via novel bifunctional nano-precipitates in a high-entropy alloy10.1016/j.ijplas.2022.103235 ↗
19. Superior strength-ductility synergy in a novel tailored nanoparticles-strengthened medium-entropy alloy10.1016/j.scriptamat.2021.114278 ↗
20. Precipitation hardening in CoCrFeNi-based high entropy alloys10.1016/j.matchemphys.2017.07.037 ↗
21. Microstructure and mechanical property of as-cast, -homogenized, and -deformed AlxCoCrFeNi (0≤x≤2) high-entropy alloys10.1016/j.jallcom.2009.08.090 ↗
22. Modifying transformation pathways in high entropy alloys or complex concentrated alloys via thermo-mechanical processing10.1016/j.actamat.2018.05.009 ↗
23. Inhibiting cracking and improving strength for additive manufactured AlxCoCrFeNi high entropy alloy via changing crystal structure from BCC-to-FCC
24. Contrasting mechanical behavior in precipitation hardenable AlxCoCrFeNi high entropy alloy microstructures: single phase FCC vs. dual phase FCC-BCC10.1016/j.msea.2018.10.021 ↗
25. Effects of Fe on L12 phase precipitation and mechanical properties in Al0.3CrFeCoNi high-entropy alloy10.1016/j.msea.2022.144094 ↗
26. Stability of ordered L12 and B2 precipitates in face centered cubic based high entropy alloys - Al0.3CoFeCrNi and Al0.3CuFeCrNi210.1016/j.scriptamat.2016.06.019 ↗
27. Stress-dependent incipient plasticity of a face-centered-cubic-based Al0.3CoCrFeNi multi-principal element alloy with nano-scaled phase separation10.1016/j.scriptamat.2021.114053 ↗
28. Cu assisted stabilization and nucleation of L12 precipitates in Al0.3CuFeCrNi2 fcc-based high entropy alloy10.1016/j.actamat.2017.02.053 ↗
29. Design of novel precipitate-strengthened Al-Co-Cr-Fe-Nb-Ni high-entropy superalloys10.1007/s11661-017-4399-9 ↗
30. Designing nanoparticles-strengthened high-entropy alloys with simultaneously enhanced strength-ductility synergy at both room and elevated temperatures10.1016/j.actamat.2022.118216 ↗
31. Effects of Fe, Cr and Mn on inter-diffusion in CoNi-containing multiple principal alloys10.1016/j.intermet.2021.107400 ↗
32. On the effect of Fe in L12 strengthened Al–Co–Cr–Fe–Ni–Ti complex concentrated alloy10.1016/j.mtla.2020.100909 ↗
33. Theoretical evaluation of solid solution interaction in Fex(CoCrMnNi)100-x medium- and high-entropy alloys10.1016/j.msea.2019.05.082 ↗
34. Superior tensile properties of Al0.3CoCrFeNi high entropy alloys with B2 precipitated phases at room and cryogenic temperatures10.1016/j.msea.2019.138424 ↗
35. B2-precipitation induced optimization of grain boundary character distribution in an Al0.3CoCrFeNi high-entropy alloy10.1016/j.jallcom.2022.165587 ↗
36. Microstructural evolution and tensile properties of Al0.3CoCrFeNi high-entropy alloy associated with B2 precipitates10.3390/ma15031215 ↗
37. Accelerated precipitation of the B2 particles and its effect on Al0.3CoCrFeNi high-entropy alloy by electric current assisted annealing10.1016/j.matchar.2021.111434 ↗
38. High-entropy Al0.3CoCrFeNi alloy fibers with high tensile strength and ductility at ambient and cryogenic temperatures10.1016/j.actamat.2016.10.038 ↗
39. Investigation on microstructure, superior tensile property and its mechanism in Al0.3CoCrFeNi high-entropy alloy via thermo-mechanical processing10.1016/j.msea.2023.144690 ↗
40. Nanoscale B2 precipitation and strengthening behavior in Al0.5CoCrFeNi high-entropy alloy10.1016/j.matchar.2022.112156 ↗
41. Outstanding tensile properties of a precipitation-strengthened FeCoNiCrTi0.2 high-entropy alloy at room and cryogenic temperatures10.1016/j.actamat.2018.11.049 ↗
42. High-temperature tensile strength of Al10Co25Cr8Fe15Ni36Ti6 compositionally complex alloy (High-Entropy alloy)10.1007/s11837-015-1484-7 ↗
43. Synergistic effects of Al and Ti on the oxidation behaviour and mechanical properties of L12-strengthened FeCoCrNi high-entropy alloys10.1016/j.corsci.2021.109365 ↗
44. Tensile mechanical properties of CoCrFeNiTiAl high entropy alloy via molecular dynamics simulations10.1016/j.intermet.2021.107444 ↗
45. Superior high-temperature properties and deformation-induced planar faults in a novel L12-strengthened high-entropy alloy10.1016/j.actamat.2020.02.028 ↗
46. A new strategy of tailoring strength and ductility of CoCrFeNi based high-entropy alloy10.1016/j.msea.2020.138940 ↗
47. Enhanced strength and ductility of Al0.9CoCrNi2.1 eutectic high entropy alloy by thermomechanical processing10.1016/j.mtla.2020.100639 ↗
48. Microstructural origins of high strength and high ductility in an AlCoCrFeNi2.1 eutectic high-entropy alloy10.1016/j.actamat.2017.07.041 ↗
49. High-strength and high-ductility AlCoCrFeNi2.1 eutectic high-entropy alloy achieved via precipitation strengthening in a heterogeneous structure10.1016/j.scriptamat.2020.04.035 ↗
50. Influences of Ti additions on the microstructure and tensile properties of AlCoCrFeNi2.1 eutectic high entropy alloy10.1016/j.intermet.2020.107024 ↗
51. Formation of ultrafine-grained microstructure in Al0.3CoCrFeNi high entropy alloys with grain boundary precipitates10.1016/j.matlet.2017.04.072 ↗
52. Enhancing strength and strain hardenability via deformation twinning in fcc-based high entropy alloys reinforced with intermetallic compounds10.1016/j.actamat.2018.12.010 ↗
53. Novel NiAl-strengthened high entropy alloys with balanced tensile strength and ductility10.1016/j.msea.2018.11.055 ↗
54. Atomic scale structural characterization of B2 phase precipitated along FCC twin boundary in a CoCrFeNiAl0.3 high entropy alloy10.1016/j.scriptamat.2018.11.016 ↗
55. Ultrastrong nanotwinned pure nickel with extremely fine twin thickness10.1126/sciadv.abg5113 ↗
56. Cyclic deformation response of planar-slip materials and a new criterion for the wavy-to-planar-slip transition10.1080/14786430310001639824 ↗
57. Inherent and multiple strain hardening imparting synergistic ultrahigh strength and ductility in a low stacking faulted heterogeneous high-entropy alloy
58. Superior strength-ductility synergy and strain hardenability of Al/Ta co-doped NiCoCr twinned medium entropy alloy for cryogenic applications10.1016/j.actamat.2021.117288 ↗
59. Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi10.1016/j.actamat.2017.02.036 ↗
60. The B2 phase-driven microstructural heterogeneities and twinning enable ultrahigh cryogenic strength and large ductility in NiCoCr-based medium-entropy alloy10.1016/j.actamat.2022.117981 ↗
61. Suppressing atomic diffusion with the Schwarz crystal structure in supersaturated Al–Mg alloys10.1126/science.abh0700 ↗
62. Ultra-fast diffusion channels in pure Ni severely deformed by equal-channel angular pressing10.1016/j.actamat.2010.11.063 ↗