Multi-stage strain-hardening and nano-twinning strengthening Co40Cr22Ni15Fe14Mo4Si3Mn2 multi-principal element alloy
Source abstract
Abstract
CoCrNiFe multi-principal element alloy (MPEA) plates were prepared by melting and rolling. Thermomechanical treatment (cold rolling and aging) was developed to modify the formation of lattice defects and precipitates. The results show that the Co40Cr22Ni15Fe14Mo4Si3Mn2 MPEA have excellent room temperature ultimate tensile strength and hardness of 1946 MPa and 684 HV0.1. Electron backscatter diffraction (EBSD) and transmission electron microscope (TEM) techniques were used to reveal the microstructure and provide insight into the mechanism. The strengthening mechanism comes from the multiple factors, and most notably, the interaction between nano-twins and Lomer-Cottrell locks. The presence of nano-twins and stacking faults has a significant impact on the strain hardening behavior of the alloy. At the same time, the occurrence and development of deformation substructure dominated by dislocation configuration is the reasons for the material to achieve multi-stage strain hardening (MSSH). This method of realizing MSSH behavior by adjusting microstructure is of great significance in the design and application of FCC MPEA and can be extended to other FCC alloys.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · Advanced materials and composites · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
2. Tough nanostructured metals at cryogenic temperatures10.1002/adma.200305679 ↗
3. High-entropy alloy: challenges and prospects10.1016/j.mattod.2015.11.026 ↗
4. A novel, non-equiatomic NiCrWFeTi high-entropy alloy with exceptional phase stability10.1016/j.matlet.2019.127202 ↗
5. Balancing scattering channels: a panoscopic approach toward zero temperature coefficient of resistance using high-entropy alloys10.1002/adma.201805392 ↗
6. Effects of compositional complexity on the ion-irradiation induced swelling and hardening in Ni-containing equiatomic alloys10.1016/j.scriptamat.2016.03.030 ↗
7. High entropy alloys as a bold step forward in alloy development10.1038/s41467-019-09700-1 ↗
8. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
9. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
10. Hierarchical microstructure design to tune the mechanical behavior of an interstitial TRIP-TWIP high-entropy alloy10.1016/j.actamat.2018.10.017 ↗
11. Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation10.1016/j.actamat.2015.06.025 ↗
12. Precipitation strengthening of ductile Cr15Fe20Co35Ni20Mo10 alloys10.1016/j.scriptamat.2017.05.019 ↗
13. Enhanced mechanical properties of a carbon and nitrogen co-doped interstitial high-entropy alloy via tuning ultrafine-grained microstructures10.1016/j.jmst.2022.10.024 ↗
14. A precipitation-hardened high-entropy alloy with outstanding tensile properties10.1016/j.actamat.2015.08.076 ↗
15. Doubled strength and ductility via maraging effect and dynamic precipitate transformation in ultrastrong medium-entropy alloy10.1038/s41467-023-35863-z ↗
16. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
17. In-situ neutron diffraction study of deformation behavior of a multi-component high-entropy alloy10.1063/1.4863748 ↗
18. The deformation behavior and strain rate sensitivity of ultra-fine grained CoNiFeCrMn high-entropy alloys at temperatures ranging from 77 K to 573 K10.1016/j.jallcom.2019.03.373 ↗
19. Tensile properties of low-stacking fault energy high-entropy alloys10.1016/j.msea.2015.03.109 ↗
20. In situ synthesis of N-containing CoCrFeNi high entropy alloys with enhanced properties fabricated by selective laser melting10.1016/j.matdes.2023.111891 ↗
21. Substructure development, martensitic transformation and rapid work-hardening in an as-cast interstitial substituted N atom in FeMnCoCr high-entropy alloy10.1016/j.jallcom.2023.170705 ↗
22. Interstitial boron-doped FeCoNiCr high entropy alloys with excellent electromagnetic-wave absorption and resistance to harsh environments
23. On the plastic deformation of a CoCrFeNiW-C alloy at elevated temperatures: Part I. Serrated plastic flow and its latent dynamics10.1016/j.actamat.2022.118430 ↗
24. Sustaining strength-ductility synergy of SLM Fe50Mn30Co10Cr10 metastable high-entropy alloy by Si addition10.1016/j.intermet.2022.107565 ↗
25. Effects of Cu/Si on the microstructure and tribological properties of FeCoCrNi high entropy alloy coating by laser cladding
26. Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases10.1016/j.actamat.2016.06.063 ↗
27. Age-hardening of the CoCrFeNiMo0.85 high-entropy alloy10.1016/j.matchar.2013.04.012 ↗
28. Multistage work hardening assisted by multi-type twinning in ultrafine-grained heterostructural eutectic high-entropy alloys10.1016/j.mattod.2020.09.029 ↗
29. Gradient cell–structured high-entropy alloy with exceptional strength and ductility10.1126/science.abj8114 ↗
30. Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off10.1038/nature17981 ↗
31. Simultaneously enhanced strength and ductility of Cu–xGe alloys through manipulating the stacking fault energy (SFE)10.1016/j.msea.2013.01.022 ↗
32. Effect of stacking fault energy on deformation behavior of cryo-rolled copper and copper alloys10.1016/j.msea.2011.09.022 ↗
33. Unexpected strength–ductility response in an annealed, metastable, high-entropy alloy10.1016/j.apmt.2018.09.002 ↗
34. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
35. Microstructure and corrosion property of CrMnFeCoNi high entropy alloy coating on Q235 substrate via mechanical alloying method10.1016/j.surfin.2019.02.004 ↗
36. Amorphous bands induced by low temperature tension in a non-equiatomic CrMnFeCoNi alloy10.1016/j.actamat.2020.02.024 ↗
37. Phase stability and kinetics of σ-phase precipitation in CrMnFeCoNi high-entropy alloys10.1016/j.actamat.2018.09.040 ↗
38. Mechanical properties and stacking fault energies of NiFeCrCoMn high-entropy alloy10.1007/s11837-013-0771-4 ↗
39. Enhanced strengthening effect via nano-twinning in cryo-rolled FeCoCrNiMo0.2 high-entropy alloys10.1016/j.msea.2023.144676 ↗
40. Multi-scale experimental investigation on microstructure related subsurface fatigue cracking behavior of selective-laser-melted superalloy at elevated temperature10.1016/j.matchar.2023.112960 ↗
41. Dual-phase synergistic deformation characteristics and strengthening mechanism of AlCoCrFeNi2.1 eutectic high entropy alloy fabricated by laser powder bed fusion10.1016/j.jmst.2022.11.045 ↗
42. Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD10.1016/j.msea.2010.01.004 ↗
43. Excellent strength-ductility synergy and corrosion resistance in a metastable high entropy alloy via heterogeneous structure design10.1016/j.jallcom.2023.168979 ↗
44. High-strength porous NiTi shape memory alloys with stable cyclic recovery properties fabricated using elemental powders10.1016/j.msea.2023.145682 ↗
45. The role of 9R structures on deformation-induced martensitic phase transformations in dual-phase high-entropy alloys10.1016/j.msea.2022.143705 ↗
46. Inherent and multiple strain hardening imparting synergistic ultrahigh strength and ductility in a low stacking faulted heterogeneous high-entropy alloy10.1016/j.actamat.2022.118516 ↗
47. Precipitation behavior and its effects on tensile properties of FeCoNiCr high-entropy alloys10.1016/j.intermet.2016.09.005 ↗
48. Hierarchical grain size and nanotwin gradient microstructure for improved mechanical properties of a non-equiatomic CoCrFeMnNi high-entropy alloy10.1016/j.jmst.2021.02.059 ↗
49. Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy10.1016/j.actamat.2016.07.038 ↗
50. A novel, single phase, non-equiatomic FeMnNiCoCr high-entropy alloy with exceptional phase stability and tensile ductility10.1016/j.scriptamat.2013.09.030 ↗
51. Optimizing the coupled effects of Hall-Petch and precipitation strengthening in a Al0.3CoCrFeNi high entropy alloy10.1016/j.matdes.2017.02.072 ↗
52. Tailoring mechanical properties of a CoCrNi medium-entropy alloy by controlling nanotwin-HCP lamellae and annealing twins10.1016/j.msea.2018.11.143 ↗
53. Strengthening CoCrNi medium-entropy alloy by tuning lattice defects10.1016/j.scriptamat.2020.07.027 ↗
54. Influence of deformation and annealing twinning on the microstructure and texture evolution of face-centered cubic high-entropy alloys10.1016/j.actamat.2018.02.048 ↗
55. Annealing-induced abnormally ultrahigh cryogenic strength-ductility synergy in a cold rolled ferrous medium entropy alloy10.1016/j.intermet.2023.107933 ↗
56. Dislocation mechanisms and 3D twin architectures generate exceptional strength-ductility-toughness combination in CrCoNi medium-entropy alloy
57. Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi10.1038/ncomms10143 ↗
58. Amorphization at twin-twin intersected region in FeCoCrNi high-entropy alloy subjected to high-pressure torsion10.1016/j.matchar.2017.02.027 ↗
59. Dynamic shear deformation of a CrCoNi medium-entropy alloy with heterogeneous grain structures10.1016/j.actamat.2018.02.016 ↗
60. A study of dislocation junctions in FCC metals by an orientation dependent line tension model10.1016/S1359-6454(02)00356-7 ↗
61. Strain hardening regimes and microstructure evolution during large strain compression of high purity titanium10.1016/S1359-6462(02)00005-2 ↗
62. High strain-rate compressive deformation behavior of the Al0.1CrFeCoNi high entropy alloy10.1016/j.matdes.2015.07.161 ↗
63. Critical role of κ-carbides in the multi-stage work hardening process of a lightweight austenitic steel10.1016/j.matchar.2023.112853 ↗
64. Physics and phenomenology of strain hardening: the FCC case10.1016/S0079-6425(02)00003-8 ↗
65. The influence of stacking fault energy on the mechanical behavior of Cu and Cu-Al alloys: deformation twinning, work hardening, and dynamic recovery10.1007/s11661-001-0109-7 ↗
66. Alloy design, combinatorial synthesis, and microstructure–property relations for low-density Fe-Mn-Al-C austenitic steels10.1007/s11837-014-1032-x ↗
67. Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys10.1016/j.pmatsci.2018.12.003 ↗