Corrosion resistance improvement of multi-principal element alloy by tailored structure with heterogeneous grains
Source abstract
Abstract
The Co40Cr20Ni30Al5Ti5 multi-principal element alloy (MPEA) with heterogeneous grain structure (HGS) and nano L12 precipitates is successfully designed by cold rolling and proper heat treatment. The HGS alloy exhibits excellent corrosion resistance and passivation performance, originated from high-density grain boundaries in fine grains and abundant defects in deformed grains, which encourages surface to form a thicker and more efficient passive layer to inhibit the initial pitting corrosion. This finding indicates that the developed MPEA with HGS can possess an excellent combination of corrosion resistance and mechanical properties, providing highly positive factors for future applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Heterostructured stainless steel: properties, current trends, and future perspectives10.1016/j.mser.2022.100691 ↗
2. Heterogenous columnar-grained high-entropy alloys produce exceptional resistance to intermediate-temperature intergranular embrittlement10.1016/j.scriptamat.2020.11.007 ↗
3. Heterogeneous materials: a new class of materials with unprecedented mechanical properties10.1080/21663831.2017.1343208 ↗
4. Enhanced pitting resistance through designing a high-strength 316L stainless steel with heterostructure10.1016/j.jmrt.2020.12.005 ↗
5. Heterostructured materials superior properties from hetero-zone interaction10.1080/21663831.2020.1796836 ↗
6. Corrosion-resistant high entropy alloy with high strength and ductility10.1016/j.scriptamat.2019.03.028 ↗
7. Precipitation behavior and its effects on tensile properties of FeCoNiCr high-entropy alloys10.1016/j.intermet.2016.09.005 ↗
8. Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases10.1016/j.actamat.2016.06.063 ↗
9. A precipitation hardened high-entropy alloy with outstanding tensile properties10.1016/j.actamat.2015.08.076 ↗
10. Heterogeneous precipitates facilitate excellent mechanical properties in non-equiatomic medium-entropy alloy
11. Nanoparticles-strengthened high-entropy alloys for cryogenic applications showing an exceptional strength-ductility synergy10.1016/j.scriptamat.2019.01.034 ↗
12. Dual heterogeneous structure facilitating an excellent strength-ductility combination in an additively manufactured multi-principal-element alloy10.1080/21663831.2022.2067790 ↗
13. Heterogeneous precipitation behavior and stacking-fault-mediated deformation in a CoCrNi-based medium-entropy alloy10.1016/j.actamat.2017.07.029 ↗
14. Design of ultrastrong but ductile medium-entropy alloy with controlled precipitations and heterogeneous grain structures
15. On the origin of the tensile flow stress in the stainless steel AISI 316L at 300 K: Back stress and effective stress10.1016/S1359-6454(99)00222-0 ↗
16. Grain boundary discontinuous precipitation reactions10.1179/imr.1981.26.1.153 ↗
17. Interface affected zone for optimal strength and ductility in heterogeneous laminate10.1016/j.mattod.2018.03.006 ↗
18. The comparison of the corrosion behavior of the CrCoNi medium entropy alloy and CrMnFeCoNi high entropy alloy
19. Understanding effect of 3.5wt.% NaCl on the corrosion of Al0.1CoCrFeNi high-entropy alloy10.1016/j.jnucmat.2017.08.015 ↗
20. Comparative corrosion behavior of Fe50Mn30Co10Cr10 dual-phase high-entropy alloy and CoCrFeMnNi high-entropy alloy in 3.5wt% NaCl solution10.1016/j.jallcom.2020.155824 ↗
21. CO2 corrosion behavior of sensitized 304 and 316 austenitic stainless steels in 3.5 wt.% NaCl solution and presence of H2S10.1016/j.corsci.2019.108230 ↗
22. Microstructure and corrosion evaluation of as-built and heat-treated 316L stainless steel manufactured by laser powder bed fusion10.1016/j.jmrt.2022.03.156 ↗
23. Interfacial bonding and corrosion behaviors of HVOF-sprayed Fe-based amorphous coating on 8090 Al-Li alloy10.1016/j.surfcoat.2022.128316 ↗
24. Warm deformation enhances strength and inhibits hydrogen induced fatigue crack growth in metastable 304 and 316 austenitic stainless steels10.1016/j.msea.2021.141415 ↗
25. On the factors influencing the elastoplastic cyclic response and low cycle fatigue failure of AISI 316L steel produced by laser-powder bed fusion
26. Novel carbon dots as effective corrosion inhibitor for N80 steel in 1 M HCl and CO2-saturated 3.5 wt% NaCl solutions10.1016/j.molstruc.2021.131897 ↗
27. Synergistic effect of stress and crevice on the corrosion of N80 carbon steel in the CO2-saturated NaCl solution containing acetic acid10.1016/j.corsci.2017.05.005 ↗
28. Melamine modified carbon dots as high effective corrosion inhibitor for Q235 carbon steel in neutral 3.5wt% NaCl solution10.1016/j.molliq.2021.118108 ↗
29. Enhancement of tensile strength in AA 6061-T6 plates joined by gas tungsten arc welding using high entropy alloy filler sheet
30. Effect of grain boundary precipitation on corrosion of heating-aging treated Al-4.47Zn-2.13Mg-1.20Cu alloy10.1016/j.jmrt.2020.03.106 ↗
31. High strength Al-Li alloy development for laser powder bed fusion
32. Effect of superficially applied ZrO2 inhibitor on the high temperature corrosion performance of some Fe-, Co- and Ni-base superalloys10.1016/j.apsusc.2008.04.042 ↗
33. Perspective on heterogeneous deformation induced (HDI) hardening and back stress10.1080/21663831.2019.1616331 ↗
34. An investigation on the corrosion performance of Fe2CoCrNi0.5 based high entropy alloys10.1016/j.corsci.2022.110497 ↗
35. Changes in the chemical state of metallic Cr during deposition on a polyimide substrate: Full soft XPS and ToF-SIMS depth profiles10.1016/j.apsusc.2021.149437 ↗
36. A new understanding of the effect of Cr on the corrosion resistance evolution of weathering steel based on big data technology10.1016/j.jmst.2021.05.086 ↗
37. Titanium interlayer between Ti-O film on CoCrMo implant alloy for improving adhesion: detailed XPS and TEM analysis of the interface10.1016/j.surfcoat.2015.07.048 ↗
38. Effect of grain size on corrosion: a review
39. Influence of grain refinement on the corrosion behavior of metallic materials: a review10.1007/s12613-021-2308-0 ↗
40. Effect of precipitate coherency on the corrosion-induced hydrogen trapping in 2024 aluminum alloy10.1016/j.ijhydene.2021.08.005 ↗