Study on the impact wear mechanism and damage modes of compacted graphite cast iron
Source abstract
Abstract
The impact wear mechanism of compacted graphite cast iron (CGI) at different temperatures (room temperature, 300 °C, 400 °C, and 500 °C) and impact frequencies (10 Hz, 12 Hz, and 14 Hz) was analyzed. The mass losses increase with test temperatures, impact frequencies and numbers. When the temperature increases to 500 °C, shallow, deep-spalling, and oxidation are the main wear mechanism of CGI. Metal oxides are generated and shed repeatedly, which can accelerate the impact wear of CGI. In addition, there are mainly two cracking modes during the impact wear test (I) Micro-cracks can generate preferentially in the graphite cavities, caused by surficial graphite falling off affected by the high-frequency shocks. The graphite cavities and micro-cracks can coalesce with each other to form the main crack (Ⅱ) The hard metal particles due to fatigue spalling can inset in the soft matrix and cause cracking.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Investigation into the evolution of microstructure and mechanical properties of compacted graphite iron under elevated temperature10.1007/s11665-021-06068-6 ↗
2. Effect of section thickness on microstructure and mechanical properties of compacted graphite iron for diesel engine applications10.1016/j.heliyon.2021.e05930 ↗
3. Creep, strain and oxidation damage in the ferritic ductile cast iron SiMo51 at 700°C10.1080/09603409.2020.1739869 ↗
4. High temperature oxidation and decarburization of SiMo cast iron in air and combustion atmospheres10.1007/s11085-021-10022-1 ↗
5. Thermal conductivity of cast iron -A review10.1007/s41230-020-9112-8 ↗
6. Calculating the effective thermal conductivity of gray cast iron by using an interconnected graphite model10.1007/s41230-020-0029-z ↗
7. Effects of alloying elements and temperature on thermal conductivity of ferrite[J]10.1063/1.5115441 ↗
8. Thermo-cycling fatigue of SiMo ductile iron using a modified thermo-mechanical test
9. Fatigue crack growth in compacted and spheroidal graphite cast irons10.1016/j.ijfatigue.2019.105319 ↗
10. An experimental study on comparison of wear properties of cast irons with compacted graphite and spheroidal graphite10.1007/s12666-019-01673-5 ↗
11. Effects of sliding speed, periodic pauses, and atmospheric moisture content on the wear of graphite against cast iron10.1016/j.wear.2019.02.013 ↗
12. Theoretical and experimental modeling of impact wear10.1108/ILT-06-2017-0159 ↗
13. Characterisation of friction behaviour of flake, spheroidal, and compacted vermicular graphite cast irons10.1504/IJSURFSE.2015.067035 ↗
14. Improving high-temperature performance of high Si-alloyed ductile iron by altering additions
15. Prevention of high-temperature surface degradation in SiMo cast irons by Cr and Al alloying[J]. Metallurgical and materials transactions10.1007/s11663-020-01975-w ↗
16. The influence of surface oxidation on the wear resistance of cast iron10.1016/0301-679X(95)00014-U ↗
17. The influence of tempering and annealing on the microstructure and sliding wear response of G350 grey cast iron10.1016/j.wear.2022.204283 ↗
18. Mechanical properties and wear resistance of direct energy deposited Fee12Mne5Cre1Ni-0.4C steel deposited on spheroidal graphite cast iron10.1016/j.jmrt.2022.06.102 ↗
19. Microstructural and wear investigation of high chromium white cast iron hardfacing alloys deposited on carbon steel10.1016/j.jallcom.2020.157472 ↗
20. The effect of laser-cladding on the wear behavior of gray cast iron brake disc10.1016/j.prostr.2021.10.129 ↗
21. Surface characteristic and wear resistance of QT-700-2 nodular cast iron after laser quenching combing with shot peening treatment10.1016/j.surfcoat.2021.127589 ↗
22. Wear of diesel engine inlet valves and seat inserts10.1243/0954407021529048 ↗
23. The influence of induction hardening on the impact wear resistance of compacted graphite iron (CGI)10.1016/j.wear.2010.11.003 ↗
24. Creep behavior accompanying oxidation of compacted graphite cast iron10.1016/j.msea.2018.03.039 ↗
25. Thermal conductivity analysis of compacted graphite cast iron after a creep test10.1007/s11661-019-05278-x ↗
26. Transition of tensile strength and damaging mechanisms of compacted graphite iron with temperature10.1016/j.msea.2016.09.035 ↗
27. Considerations on the thermal behaviour and oxidation resistance of cast iron10.1023/A:1010122328746 ↗
28. Short-term high temperature oxidation of lamellar cast iron10.4028/www.scientific.net/MSF.369-372.181 ↗