Effect of post heat treatment on surface properties of hydrogen peroxide (H2O2) treated titanium
Source abstract
Abstract
In this study different heat treatment temperatures have been applied for titanium implant after surface modification through chemical treatment by Hydrogen Peroxide (H2O2). X-ray diffraction (XRD) analysis revealed that the main phase at the surface of heat-treated sample at temperatures below than 650 °C is Anatase, moreover, the presence of Anatase, which is dominate along the Raman shift, with noticeable pick intensity is confirmed by Raman spectroscopy technique. Field emission scanning microscopy (FESEM) observation shows that by increasing temperature, the porous structures did not change significantly in terms of morphology. Contact Angle (CA) measurement and Ellipsometry are other techniques which are used to figure out hydrophobicity of the surface and optical properties of the oxide surface, respectively.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Dental materials and restorations · Dental Implant Techniques and Outcomes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. In vitro studies of hydrogen peroxide treated titanium for biomedical applications10.1016/j.electacta.2009.11.057 ↗
2. Oxygen vacancy induced structural phase transformation in TiO2 nanoparticles10.1088/0022-3727/42/20/205101 ↗
3. Effect of annealing temperature on Raman spectra of TiO2 nanoparticles10.1016/j.cplett.2012.10.082 ↗
4. TiO2 nanonetwork on rough Ti enhanced osteogenesis in vitro and in vivo10.1177/00220345211001017 ↗
5. Titanium-Based alloy surface modification with TiO2and poly(sodium 4-styrenesulfonate) multilayers for dental implants10.1021/acsabm.0c01348 ↗
6. Raman spectroscopy: a new approach to measure the percentage of anatase TiO2 exposed (001) facets10.1021/jp301256h ↗
7. Khodaei M, Amini K, Valanezhad A, Watanabe I. Surface treatment of titanium dental implant with H 2 O 2 solution.
8. Surface modification of titanium, titanium alloys, and related materials for biomedical applications10.1016/j.mser.2004.11.001 ↗
9. Influence of synthesis parameters on morphology and phase composition of porous titania layers prepared via water based chemical solution deposition10.1016/j.jeurceramsoc.2007.02.200 ↗
10. Gittens · 2014 · vol. 10 · 2907
11. Implantation of hydrophilic and hydrophobic titanium discs in rat tibia: cellular reactions on the surfaces during the first 3 weeks in bone10.1016/j.biomaterials.2003.12.006 ↗
12. Bone apposition around two different sandblasted and acid-etched titanium implant surfaces: a histomorphometric study in canine mandibles10.1111/j.1600-0501.2007.01473.x ↗
13. The roles of titanium surface micro/nanotopography and wettability on the differential response of human osteoblast lineage cells10.1016/j.actbio.2012.12.002 ↗
14. Surface characteristics of Ti-10Ta-10Nb alloy modified by hydrogen peroxide treatment for dental implants10.1002/sia.3781 ↗
15. Yang · 2014
16. Micro-Raman spectroscopic analysis of TiO2 phases on the root surfaces of commercial dental implants10.1016/j.dental.2014.05.030 ↗
17. Wang · 2016
18. The properties of bioactive TiO 2 coatings on Ti-based implants10.1016/j.surfcoat.2012.08.037 ↗
19. Chemical modification of titanium immersed in hydrogen peroxide using nanosecond pulsed fiber laser irradiation10.1016/j.matlet.2011.01.002 ↗
20. Low-temperature preparation of titania nanorods through direct oxidation of titanium with hydrogen peroxide10.1016/j.jcrysgro.2004.05.023 ↗
21. Effect of oxidizing atmosphere on the surface of titanium dental implant material
22. In vitro and in vivo evaluation of SLA titanium surfaces with further alkali or hydrogen peroxide and heat treatment10.1088/1748-6041/6/2/025001 ↗
23. Optimum temperature and chlorine ion concentration for hydrogen peroxide treatment of titanium dental implant material10.1016/j.jmrt.2020.09.040 ↗