journal article·2020-07Open access

Improved analysis methods to study the behavior of potassium ions in the interlayer of montmorillonite

Danchao Huang, Gang Xie, Pengfei Hu, Sipei Hu, Zhan Zhao, Wai Li, Mingyi Deng, Pingya Luo

Abstract

The behavior of potassium chloride (KCl) as a main mud shale inhibitor remains poorly defined in the interlayer of montmorillonite (Mt). In this paper, a new analysis method of transmission electron microscopy-energy dispersive X-ray spectroscopy (TEM-EDS) was established. The distribution of K+ in the interlayer of Mt and the processes surrounding d-spacing shifts in Mt were investigated through X-ray diffraction and TEM-EDS. The experimental results revealed shoulder peaks in the diffraction patterns at KCl concentrations between 11% and 19%. The distribution of K+ varied in the inner and outer layers of Mt with different KCl concentrations. It could be concluded that the distribution of K+ and the changes in d-spacing of Na are determined by two factors: negative charge sites and concentration difference. When the KCl concentration was below 8%, both factors cause the outer layer of Mt to adsorb more K+ than the inner layer, with all layers exhibiting d-spacings within the 1.50 nm state. At an 8% KCl concentration, all negative charge sites were occupied by K+. As the KCl concentration rose above 8%, the outer layer of Mt adsorbed more K+ than the inner layer due to the concentration difference. With a further increase in the KCl concentration, the d-spacing shifted linearly to 1.30 nm from the outer to the inner layer of Mt. All layers of Mt exhibited a d-spacing of 1.30 nm at KCl concentrations of up to 23%. These results demonstrate the benefits and capabilities of the proposed method in investigating the intercalating mechanisms of Mt.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Drilling and Well Engineering · Hydraulic Fracturing and Reservoir Analysis · CO2 Sequestration and Geologic Interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Atomic theories of phyllosilicates: quantum chemistry, statistical mechanics, electrostatic theory, and crystal chemistry10.1029/92RG01823 ↗
2. Adsorption of water vapor by montmorillonite. II. Effect of exchangeable ions and lattice swelling as measured by X-ray diffraction10.1021/ja01126a002 ↗
3. Performance evaluation of laponite as a mud-making material for drilling fluids10.1007/s12182-018-0298-y ↗
4. The assembly of a composite based on nano-sheet graphene oxide and montmorillonite10.1007/s12182-018-0216-3 ↗
5. A study of wellbore stability in shales including poroelastic, chemical, and thermal effects10.1016/S0920-4105(03)00030-5 ↗
6. Mechanical and physic-chemical aspects of wellbore stability during drilling operations10.1016/j.petrol.2012.01.006 ↗
7. A novel nonionic surfactant for inhibiting shale hydration10.1016/j.clay.2015.09.006 ↗
8. Advances in functionalized nanoparticles based drilling inhibitors for oil production10.1016/j.egyr.2019.06.002 ↗
9. Advanced developments in shale inhibitors for oil production with low environmental footprints – a review10.1016/j.fuel.2019.03.006 ↗
10. Saleh · 2017
11. Saleh · 2016
12. A novel oil-in-water drilling mud formulated with extracts from Indian mango seed oil10.1007/s12182-019-00371-7 ↗
13. Investigation of biodiesel-based drilling fluid, part 1: biodiesel evaluation, invert-emulsion properties, and development of a novel emulsifier package10.2118/180918-PA ↗
14. Investigation of biodiesel-based drilling fluid. Part 2: formulation design, rheological study, and laboratory evaluation10.2118/180926-PA ↗
15. Zhou C, Liu F, Zhenzhou Y. High density and high temperature emulsifier for use in an oil based drilling fluid system. U.S. Patent Application 10,280,357; 2019.
16. Applied properties of oil-based drilling fluids with montmorillonites modified by cationic and anionic surfactants
17. Diverse application of unique high performance water based mud technology in the Middle East
18. Shale-fluid interactions and drilling fluid designs
19. Clay swelling—a challenge in the oilfield10.1016/j.earscirev.2009.11.003 ↗
20. Design and development of quaternary amine compounds: shale inhibition with improved environmental profile
21. Fundamentals and use of potassium/polymer drilling fluids to minimize drilling and completion problems associated with hydratable clays10.2118/10100-PA ↗
22. Molecular modelling of the mechanism of action of organic clay-swelling inhibitors10.1080/08927020108023012 ↗
23. Monte Carlo and molecular dynamics simulations of electrical double-layer structure in potassium–montmorillonite hydrates10.1021/la9704720 ↗
24. Inhibitive effect of potassium methylsiliconate on hydration swelling of montmorillonite10.1134/S1061933X14040061 ↗
25. Applications of water-soluble polymers as shale stabilizers in drilling fluids10.1021/ba-1986-0213.ch010 ↗
26. Jianying · 1987
27. Molecular computer simulations of the swelling properties and interlayer structure of cesium montmorillonite10.1021/la980015z ↗
28. Hydration of bentonite in natural waters: application of “confined volume” wet-cell X-ray diffractometry10.1016/j.pce.2006.02.048 ↗
29. A thermodynamic understanding of clay-swelling inhibition by potassium ions10.1002/anie.200601740 ↗
30. Monte Carlo molecular modeling studies of hydrated Li-, Na-, and K-smectites: understanding the role of potassium as a clay swelling inhibitor10.1021/ja00155a025 ↗
31. Enthalpy changes accompanying the collapse of montmorillonite layers and the penetration of electrolyte into interlayer space10.1006/jcis.1996.0482 ↗
32. Nanocomposite of carbon nanotubes/silica nanoparticles and their use for adsorption of Pb (II): from surface properties to sorption mechanism10.1080/19443994.2015.1036784 ↗
33. Mercury sorption by silica/carbon nanotubes and silica/activated carbon: a comparison study10.2166/aqua.2015.050 ↗
34. Isotherm kinetic, and thermodynamic studies on Hg (II) adsorption from aqueous solution by silica-multiwall carbon nanotubes10.1007/s11356-015-4866-z ↗
35. Selective and irreversible adsorption mechanism of cesium on illite10.1016/j.apgeochem.2017.05.019 ↗
36. Preparation of platinum/montmorillonite nanocomposites in supercritical methanol and their application in the hydrogenation of nitrobenzene10.1007/s10562-009-9980-4 ↗
37. The modification of Na-montmorillonite by salts of fatty acids: an easy intercalation process10.1016/j.colsurfa.2010.08.061 ↗
38. Modification of a montmorillonite–illite clay using alkaline hydrothermal treatment and its application for the removal of aqueous Cs+ ions10.1016/j.jcis.2005.12.008 ↗
39. Sutures modified by silver-loaded montmorillonite with antibacterial properties10.1016/j.clay.2014.03.007 ↗
40. The influence of treatment temperature on the acidity of MWCNT oxidized by HNO3 or a mixture of HNO3/H2SO410.1016/j.apsusc.2011.04.020 ↗
41. Simultaneous adsorptive desulfurization of diesel fuel over bimetallic nanoparticles loaded on activated carbon10.1016/j.jclepro.2017.11.208 ↗
42. Heavy metal removal from water by sorption using surfactant-modified montmorillonite10.1016/S0304-3894(02)00026-2 ↗
43. Structural evidence for the sorption of Ni (II) atoms on the edges of montmorillonite clay minerals: a polarized X-ray absorption fine structure study10.1016/S0016-7037(02)01005-0 ↗