Microstructure evolution mechanism near the fracture lip of 4Cr5MoSiV1 steel during deforming at 580 °C
Source abstract
Abstract
The failure mechanisms under thermal-mechanical conditions have always been a critical issue in hot work steels. However, previous studies mainly focused on the mechanical properties of hot work materials, while the underlying deformation mechanism remains largely unclear. Here, we investigate the crack morphology and microstructure evolution mechanism near the fracture surfaces of 4Cr5MoSiV1 hot work die steels subjected to the uniaxial tension at 580 °C. An evident deformation band was observed consisting of refined α-Fe grains with a width of about 100nm along both sides of the intergranular fracture surface. Additionally, characteristic slip band rings formed frequently, presumably due to the grain rotation near the crack. Finally, carbides (including MC, M7C3 and M23C6) were also considered as possible crack nucleation sources due to the existence of incoherent boundary between these carbides and the ferrite matrix.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Fracture behaviour of additively manufactured MS1-H13 hybrid hard steels10.1016/j.matlet.2017.10.097 ↗
2. High-temperature softening mechanism and kinetic of 4Cr5MoSiV1 steel during tempering
3. Experimental investigation of hot-work tool steels performances under the creep-fatigue regime10.1007/s00170-017-1023-5 ↗
4. In situ TEM investigation on void coalescence in metallic materials10.1016/j.msea.2018.07.064 ↗
5. Crack propagation mechanisms of AISI 4340 steels with different strength and toughness10.1016/j.msea.2018.05.056 ↗
6. Microstructure evolution and fracture mechanism of H13 steel during high temperature tensile deformation10.1016/j.msea.2019.01.027 ↗
7. Thermomechanical fatigue behavior of Cr–Ni–Mo cast hot work die steel
8. Atom probe tomographic observation of hydrogen trapping at carbides/ferrite interfaces for a high strength steel10.1016/j.jmst.2017.11.008 ↗
9. Coalescence mechanism of helium bubble during tensile deformation revealed by in situ small-angle X-ray scattering
10. Dynamic deformation behavior of ultrafine-grained iron produced by ultrahigh strain deformation and annealing
11. Modeling the deformation textures and microstructural evolutions of a Fe-Mn-C TWIP steel during tensile and shear testing10.1016/j.msea.2012.01.128 ↗
12. Enhanced thermal stability of nanograined metals below a critical grain size10.1126/science.aar6941 ↗
13. Shear-band affected zone revealed by magnetic domains in a ferromagnetic metallic glass10.1038/s41467-018-06919-2 ↗
14. Quantitative investigation of micro slip and localization in polycrystalline materials under uniaxial tension10.1016/j.ijplas.2018.04.014 ↗
15. Grain rotation mediated by grain boundary dislocations in nanocrystalline platinum
16. Plastic deformation behavior and construction of constitutive model in a wide range of strain rates of 800 MPa grade dual phase steel10.1016/j.mechmat.2018.04.009 ↗
17. An experimental study of the polycrystalline plasticity of austenitic stainless steel10.1016/j.ijplas.2015.05.012 ↗
18. Phase transitions and the nucleation of catalytic nanostructures under the action of chemical, physical, and mechanical factors10.1134/S0023158408010102 ↗
19. Non-crystallographic symmetry of liquid metal, flat crystallographic faults and polymorph transformation of the M7C3 carbide10.1107/S2053273317000936 ↗
20. On the origin and contribution of extended kinks and jogs and stacking fault ribbons to deformation behavior in an ultrahigh strength cobalt-free maraging steel with high density of low lattice misfit precipitates10.1016/j.msea.2018.05.039 ↗
21. Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation10.1038/nature22032 ↗
22. A comparison of microstructure and mechanical properties of low-alloy-medium-carbon steels after quench-hardening10.1016/j.msea.2018.04.012 ↗