Electrodeposited Zn-soybean nanocrystal composite coatings: an effective strategy to produce cheaper and corrosion resistant Zn composite coatings
Source abstract
Abstract
Zn-soybean nanocrystal composite coating was produced through electrodeposition. The coatings were obtained in the absence and presence of different concentrations of soybean nanocrystals obtained through the bleaching process with a sodium hypochlorite (NaClO) solution and hydrolysis in a sulfuric acid solution. The effect of nanocrystal addition on the coating characteristics was analyzed through scanning electron microscopy (SEM), roughness measurements, hardness measurements, corrosion resistance evaluation and current efficiency determination. Corrosion resistance was evaluated at 0.5 wt% NaCl solution through mass loss and electrochemical measurements. The results obtained indicate that the presence of soybean nanocrystal reduces the hardness, but increases the corrosion resistance of the Zn coating and this effect is related to the decrease in the roughness of the coating.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Conducting polymers and applications · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Graphene reinforced Zn–Ni alloy composite coating on iron substrate by pulsed-reverse electrodeposition and its high corrosion resistance
2. Evaluation of corrosion protection performance of electroplated zinc and zinc-graphene oxide nanocomposite coatings in air saturated 3.5 wt.% NaCl solution
3. Enhanced hardness and corrosion resistance of Zn/SiO2 films by electrodeposition10.1149/2.0821509jes ↗
4. Preparation and corrosion resistance of pulse electrodeposited Zn and Zn–SiC nanocomposite coatings10.1016/j.apsusc.2013.12.143 ↗
5. Microstructure-corrosion resistance relationship of direct and pulse current electrodeposited Zn-TiO2 nanocomposite coatings10.1016/j.ceramint.2014.08.061 ↗
6. Electrodeposition and properties of Zn-nanosized TiO2 composite coatings10.1016/j.apsusc.2007.09.047 ↗
7. Structural and properties of Zn-Al2O3-SiC nano-composite coatings by direct electrolytic process10.1007/s00170-016-8428-4 ↗
8. Zn-ZrO2 nanocomposite coatings: elecrodeposition and evaluation of corrosion resistance10.1016/j.apsusc.2011.05.067 ↗
9. Galvanic corrosion of zinc and its alloys10.1149/1.1836662 ↗
10. Effect of surfactants on co-deposition of B4C nanoparticles in Zn matrix by electrodeposition and its corrosion behavior10.1016/j.surfcoat.2011.09.075 ↗
11. Effect of morphology and surface modification of silica nanoparticles on the electrodeposition and corrosion behavior of zinc-based nanocomposite coatings10.1149/2.0191902jes ↗
12. Comparison of corrosion behaviour of zinc in NaCl and in NaOH solutions. Part I: corrosion layer characterization
13. A short review on mechanical properties of graphene reinforced metal matrix composites10.1016/j.jmrt.2020.01.077 ↗
14. Progress and challenges in using sustainable carbon anodes in rechargeable metal-ion batteries10.1016/j.pecs.2021.100929 ↗
15. Waste recycling in thermoelectric materials
16. Green and recyclable cellulose based TENG for sustainable energy and human-machine interactive system
17. Micro-mesoporous carbons from cyclodextrin nanosponges enabling high-capacity silicon anodes and sulfur cathodes for lithiated Si-S batteries10.1002/chem.202104201 ↗
18. Cardanol-derived epoxy resins as biobased gel polymer electrolytes for potassium-ion conduction10.1021/acsapm.2c00335 ↗
19. Nanosponge-based composite gel polymer electrolyte for safer Li-O2 batteries
20. Lignin as polymer electrolyte precursor for stable and sustainable potassium batteries10.1002/cssc.202200294 ↗
21. Reduced graphene oxide decorated cellulose acetate filter evaporators for highly efficient water evaporation and purification driven by solar energy and environmental energy
22. Chitosan as a paradigm foi biopolymer electrolytes in solid-state dye-sensitised solar cell10.1016/j.polymer.2021.124092 ↗
23. Lignin-based polymer electrolyte membranes for sustainable aqueous dye-sensitized solar cell10.1021/acssuschemeng.1c01882 ↗
24. Development of metal-matrix composites from industrial/agricultural waste materials and their derivatives10.1080/10643389.2015.1077067 ↗
25. Review on the physicochemical treatments of rice husk for production of advanced materials10.1016/j.cej.2014.11.056 ↗
26. Improving the interfacial reaction between cristobalite silica from rice husk and Al-Mg-Si by CVD-Si 3 N 4 deposition10.1007/s12649-019-00706-w ↗
27. Surface modification of rice-husk ash (RHA) by Si3N4 coating to promote its wetting by Al-Mmatriz metalicag-Si alloys10.1016/j.matchemphys.2017.10.009 ↗
28. Eco-fabrication of hierarchical porous silica monoliths by ice-templating of rice husk ash10.1039/C6GC02153K ↗
29. Macroporous polymer-derived SiO2/SiOC monoliths freeze-cast from polysiloxane and amorphous silica derived from rice husk10.1016/j.jeurceramsoc.2017.06.023 ↗
30. Comparing percolation and alignment of cellulose nanocrystals for the reinforcement of polyurethane nanocomposite10.1021/acsami.1c21656 ↗
31. Effect of cellulose nanofiber and cellulose nanocrystals reinforcement on the strength and stiffness of PVAc bonded joints10.1016/j.compstruct.2022.115821 ↗
32. Experimental investigation into the direct feeding of coupling agent, cellulose nanocrystals, and nano zinc oxide in high-density polyethylene
33. Synthesis, structure, and properties of superhydrophobic nickel–PTFE nanocomposite coatings made by electrodeposition10.1016/j.surfcoat.2015.08.022 ↗
34. Electrodeposition and the properties of a Zn-Cotton nanocrystal composite coating. Electrodeposition and the properties of a Zn-Cotton nanocrystal composite coating10.1016/j.jmrt.2022.01.016 ↗
35. Extraction and characterization of cellulose nanocrystals from agro-industrial residue – soy hulls10.1016/j.indcrop.2012.06.041 ↗
36. https://www.embrapa.br/soja/cultivos/soja1/dados-economicos. Access: 17/11/2021.
37. Valor nutricional da casca do grão de soja, farelo de soja, milho moído e farelo de trigo para bovinos10.4025/actascianimsci.v23i0.2648 ↗
38. Isolation and characterization of nanofibers from agricultural residues – wheat straw and soy hulls10.1016/j.biortech.2007.04.029 ↗
39. Preparação e caracterização de nanocompósitos de proteína isolada de soja reforçados com nanocristais de celulose extraídos da casca de soja e da fibra de algodão
40. Glycerol effect on the corrosion resistance and electrodeposition conditions in a zinc electroplating process
41. Corrosion resistance of a Zn-Ni electrodeposited alloy obtained with a controlled flow and gelatin additive10.1016/j.surfcoat.2006.06.006 ↗
42. Effect of nickel and magnesium on zinc electrowinning using sulfate solutions10.1590/S0104-66322011000300013 ↗
43. Electrodeposition of zinc and composite zinc–yttria stabilized zirconia coatings10.1016/j.jmatprotec.2008.06.031 ↗
44. Corrosion study of electrodeposited Zn and Zn-Co coatings in chloride medium10.1590/S0103-50532007000600010 ↗
45. Effect of electroplating parameters on properties of Zn–nano-TiO2 composite coatings10.1179/1743294412Y.0000000077 ↗
46. Characteristics of electrodeposition of Ni-polyethylene composite coatings10.1016/S0167-577X(01)00484-0 ↗
47. Cluster size effect in hardness of nanoclay/epoxy composites10.1016/j.compositesb.2004.09.006 ↗
48. CeO2 modified SiO2 acted as additive in electrodeposition of Zn-Ni alloy coating with enhanced corrosion resistance10.1016/j.jallcom.2017.11.031 ↗
49. Effect of surfactants on the corrosion and wear performance of zinc-epoxy powder composite coatings10.20964/2021.07.01 ↗
50. Corrosion behaviour of zinc deposits obtained under pulse current electrodeposition: effects of coumarin as additive10.1016/j.corsci.2008.12.020 ↗
51. Electrochemical corrosion behavior of nanocrystalline zinc coatings in 3.5% NaCl solutions10.1007/s10008-007-0293-5 ↗
52. Electrodeposited zinc composite coatings with embedded carbon nanotubes – advanced composite materials for better corrosion protection10.1080/00202967.2018.1520486 ↗
53. Characterization of passive films on shape memory stainless steels10.1016/j.corsci.2011.12.022 ↗
54. Corrosion monitoring of galvanized steel in soil extract solutions by electrochemical impedance spectroscopy10.1002/mawe.201400243 ↗
55. Role of turbulent flow seawater in the corrosion enhancement of an Al-Zn-Mg alloy: an electrochemical impedance spectroscopy (EIS) analysis of oxygen reduction reaction (ORR)10.1016/j.jmrt.2017.06.004 ↗
56. The characterization of eletrodeposited Zn-SiO and composites before and after corrosion test10.1016/0010-938X(94)90011-6 ↗
57. Application of PEO75PPO30PEO75 stabilised polymeric micelles for improved corrosion resistance of composite zinc coatings10.1080/00202967.2017.1342460 ↗
58. Electrodeposition and corrosion resistance properties of Zn-Ni/TiO2 nano composite coatings
59. Hydrogen absorption, desorption and embrittlement of Zn and ZnNi-electrodeposited bolts10.1016/j.jmrt.2021.02.006 ↗
60. Effect of pulse current on the electrodeposition of copper from choline chloride-ethylene glycol10.1007/s10008-014-2400-8 ↗
61. A comparative study of nickel electrodeposition using deep eutectic solvents and aqueous solutions10.1016/j.electacta.2015.07.051 ↗
62. Electrodeposited Zn–TiO2 nanocomposite coatings and their corrosion10.1007/s10800-010-0130-x ↗