Improved microstructure and physiochemical properties of hopeite conversion coating by Si3N4 nanoparticles doping
Source abstract
Abstract
The effect of nano-scaled Si3N4 particles on the microstructure, mechanical and electrochemical behavior of hopeite (Zn3(PO4)2·4H2O) conversion coating on pure titanium was investigated. Different concentrations of nanoparticles were dispersed into the phosphating bath to incorporate the process of coating deposition. The XRD results demonstrated that nano-Si3N4 were doped into the coatings without any decomposition or reaction with the hopeite phase. A finer and denser microstructure of the composite coating could be obtained at the addition of 0.5 g/L Si3N4 in comparison with the pure hopeite coating. Moreover, the composite coating presented a higher bonding strength and corrosion resistance related to the refinement of microstructure and filling of the embedded nanoparticles. It is suggested that the incorporation of nano-Si3N4 particles in conversion coating is a promising approach for performance optimization.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Advanced materials and composites · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Effect of different nanoparticles based coating on the performance of textile properties10.1016/j.porgcoat.2016.12.007 ↗
2. Biological effect of hydrothermally synthesized silica nanoparticles within crystalline hydroxyapatite coatings for titanium implants10.1016/j.msec.2018.06.043 ↗
3. Electrochemically driven hydroxyapatite nanoparticles coating of medical implants10.1002/adfm.201603575 ↗
4. Superhydrophobic coatings fabricated with polytetrafluoroethylene and SiO2 nanoparticles by spraying process on carbon steel surfaces10.1016/j.apsusc.2015.05.068 ↗
5. Communication—effect of nano-alumina concentration on the microstructure and corrosion resistance of phosphate chemical conversion coating10.1149/2.0131607jes ↗
6. A review on the application of inorganic nanoparticles in chemical surface coatings on metallic substrates10.1039/C6RA25841G ↗
7. Zinc phosphate as versatile material for potential biomedical applications Part II10.1007/s10856-006-6333-3 ↗
8. Enhanced cytocompatibility and antibacterial property of zinc phosphate coating on biodegradable zinc materials10.1016/j.actbio.2019.03.055 ↗
9. Formation of a phosphate conversion coating on bioresorbable Mg-based metallic glasses and its effect on corrosion performance10.1016/j.corsci.2017.10.014 ↗
10. Ultrasonic induced rapid formation and crystal refinement of chemical conversed hopeite coating on titanium10.1021/jp408444j ↗
11. Trivalent chromium conversion coatings10.1007/s11998-019-00210-9 ↗
12. Electrochemical and structural properties of electroless Ni-P-SiC nanocomposite coatings10.1016/j.apsusc.2013.03.156 ↗
13. Surface pretreatment by phosphate conversion coatings - a review
14. Machu · 1950
15. Hopeite and scholzite coatings formation on titanium via wet-chemical conversion with controlled temperature10.1016/j.surfcoat.2019.125330 ↗
16. Electric field induced rapid formation of novel structural hopeite coating on titanium10.1016/j.matlet.2015.01.014 ↗
17. Chemical conversion of zinc–zinc phosphate composite coating on TC4 by galvanic coupling10.1039/C7NJ02382K ↗
18. Electrochemical properties and bioactivity of hydroxyapatite coatings prepared by MEA/EDTA double-regulated hydrothermal synthesis10.1016/j.electacta.2018.12.140 ↗
19. EIS studies of coated metals in accelerated exposure10.1016/S0300-9440(02)00222-9 ↗
20. Corrosion protective performances of commercial low-VOC epoxy/urethane coatings on hot-rolled 1010 mild steel10.1016/S0300-9440(97)00095-7 ↗
21. The effect of hydroxyapatite nanoparticles on electrochemical and mechanical performance of TiC/N coating fabricated by plasma electrolytic saturation method10.1016/j.surfcoat.2020.125817 ↗