Study on serration flow and dynamic strain aging of Cr–Ti–B low-carbon steel
Source abstract
Abstract
Compression tests were carried out for hot-rolled Cr–Ti–B low-carbon steels with different Cr contents (low Cr and high Cr) at three strain rates (0.01, 0.1 and 1 s−1) and temperatures ranging from 250 to 650 °C. The serrated flow and dynamic strain aging (DSA) behaviors during deformation were systematically analyzed. The results showed that the effect of the strain rate on serration flow is more obvious than that of the deformation temperature, and the serration type changes from type C to type A with increasing strain rate. The occurrence temperature range of DSA in high Cr steel (350–450 °C) is higher than that in low Cr steel (300–400 °C) at a strain rate of 1 s−1. The activation energy for DSA close to that for the diffusion of carbon, which is considered to produce DSA. A Cr–C cluster is observed in high Cr steel, which clarified that the delaying mechanism throughout the DSA regime is attributed to the pinning of carbon diffusion by Cr atoms.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Warm rolling behaviour of low carbon steels10.1179/026708303225002848 ↗
2. Influence of ferrite rolling temperature on microstructure and texture in deformed low C and IF steels10.2355/isijinternational.37.697 ↗
3. Effect of chromium, boron and manganese additions on the deformation and recrystallization textures of warm rolled low carbon steels10.2355/isijinternational.43.1842 ↗
4. Effects of shear band formation on texture development in warm-rolled IF steels10.1016/S0924-0136(01)00786-5 ↗
5. Portevin · C R Hebd Seances Acad Sci · 1923 · 176 · 507
6. Serration and noise behaviors in materials10.1016/j.pmatsci.2017.06.004 ↗
7. Entropy modeling on serrated flows in carburized steels10.1016/j.msea.2019.02.096 ↗
8. Enhanced ductility in dynamic strain aging regime in a Fe-25Ni-20Cr austenitic stainless steel10.1016/j.msea.2018.05.060 ↗
9. Strain rate sensitivity and evolution of dislocations and twins in a twinning-induced plasticity steel10.1016/j.actamat.2015.01.013 ↗
10. New observations on the mechanisms of dynamic strain aging and of jerky flow10.1016/0001-6160(79)90130-5 ↗
11. Dynamic strain ageing in iron alloys: the shielding effect of carbon10.1016/j.actamat.2016.04.018 ↗
12. Effect of chromium and born additions on the warm rolling behavior of low carbon steels10.2355/isijinternational.42.Suppl_S52 ↗
13. Several aspects of the temperature history in relation to the cyclic behaviourof an austenitic stainless steel10.1016/j.msea.2011.06.048 ↗
14. Effects of dynamic strain aging on the subsequent mechanical properties of carbon steels10.1007/BF02663406 ↗
15. Mechanism of dynamic strain aging and characterization of its effect on the low-cycle fatigue behavior in type 316L stainless steel10.1016/j.jnucmat.2004.12.012 ↗
16. Effect of dynamic strain aging on high temperature properties of austenitic stainless steel10.1016/j.msea.2004.03.004 ↗
17. Activation energy for serrated flow in a 15Cr-15Ni Ti-modified austenitic stainless steel10.1016/0956-7151(92)90406-5 ↗
18. Miller · 2000
19. Serrated plastic flow revisited10.4028/www.scientific.net/SSP.42-43.257 ↗
20. Microstructural and mechanical influences on dynamic strain aging phenomena10.1179/imr.1994.39.3.113 ↗
21. The mechanism of critical strain and serration type of the serrated flow in Mg–Nd–Zn alloy10.1016/j.msea.2015.09.100 ↗
22. Study of dynamic strain aging in dual phase steel10.1016/j.msea.2012.02.050 ↗
23. A one-parameler approach to determining the critical conditions for the initiation of dynamic recrystallization10.1016/1359-6454(95)00146-7 ↗
24. A model for the flow stress and strain rate sensitivity of a substitutional alloy-Cu-3. 1%Sn
25. Physical simulation of hot rolling in the ferrite range of steels
26. A model for the Portevin-Le Chatelier effect in substitutional alloys10.1016/0001-6160(72)90028-4 ↗
27. Effects of temperature and strain rate on tensile properties and activation energy for dynamic strain aging in alloy 62510.1007/s11661-004-0057-0 ↗
28. Dynamic strain aging behavior of Inconel 600 alloy
29. Activation energy calculation and dynamic strain aging in austenitic stainless steel10.1016/0956-716X(94)90134-1 ↗
30. Dynamic strain ageing effects on superduplex stainless steels at intermediate temperatures10.1016/j.msea.2003.10.293 ↗
31. Discussing the precipitation behavior of σ phase using diffusion equation and thermodynamic simulation in dissimilar stainless steels10.1016/j.jallcom.2010.07.084 ↗
32. 3D atom probe characterazation of alloy carbides in tempering martenite Ⅱ
33. LXXXVI. A note on the Portevin-Le Chatelier effect10.1080/14786440808520347 ↗
34. Development of shear bands in f.c.c. single crystals10.1016/0001-6160(85)90080-X ↗