Investigations on corrosion behaviors of super-strength sucker rod FG20 steel in high SO42− environment
Source abstract
Abstract
In some sour reservoirs and tertiary oil recovery blocks, SO 4 2− in the well fluid can cause the corrosion and corrosion fatigue of the sucker rods . In this paper, the corrosion behaviors of super-strength sucker rod FG20 (16Mn2SiCrMoVTiA) steel in the well fluid are investigated by electrochemical measurements, and electron probe micro-analyzer (EPMA) analysis. The results show that FG20 steel has a favorable corrosion resistance in neutral solution. When the hydrogen ions increase, the hydrolysis of SO 4 2− greatly accelerates the corrosion of FG20 steel. The energy dispersive X-ray (EDX) results demonstrate that the corrosion process of FG20 steel in neutral well fluid is an oxygen concentration process, and the protective FeCO 3 and Fe 2 O 3 on the surface of the samples can prevent the further corrosion. With the increase of the acidity in the well fluid, the corrosion process converts into a sulphide concentration process, and the sloppy FeS and mackinawite film cannot provide effective protection for the specimens, resulting in the increase of corrosion rate .
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Takacs · 2015
2. Analysis on failure mechanism of sucker rod pumping system10.4028/www.scientific.net/AMR.875-877.1219 ↗
3. Advances in improved/enhanced oil recovery technologies for tight and shale reservoirs10.1016/j.fuel.2017.08.095 ↗
4. Considerations on the possibility of microbial clogging of re-injection wells of the wastewater generated in a water-dissolved natural gas field10.1016/j.ibiod.2012.10.003 ↗
5. Boron removal from water: needs, challenges and perspectives10.1016/j.jclepro.2013.11.040 ↗
6. Bioelectrochemical approaches for removal of sulfate, hydrocarbon and salinity from produced water10.1016/j.chemosphere.2016.09.081 ↗
7. Wear and CO2 corrosion of steel couplings and tubing in heavy oil screw-pump wells10.1016/S0043-1648(97)00011-2 ↗
8. Preliminary study on corrosion behaviour of carbon steel in oil–water two-phase fluids10.1016/j.jmst.2014.12.014 ↗
9. Failure mechanism of sucker rod coupling10.1016/j.engfailanal.2013.10.003 ↗
10. Synthesis and characterization of mixed iron-manganese oxide nanoparticles and their application for efficient nickel ion removal from aqueous samples10.1155/2017/9476065 ↗
11. Technical summary of oil & gas produced water treatment technologies
12. Investigation on grain refinement and precipitation strengthening applied in high speed wire rod containing vanadium10.1016/j.msea.2013.10.068 ↗
13. Precipitation strengthening of titanium microalloyed high-strength steel plates with isothermal treatment10.1016/j.msea.2016.01.064 ↗
14. Improvement of mechanical properties of FG20 super-high strength steel for oil-sucker rods
15. Research and production of extra-high tensile bainitic microalloying steel for sucker rod
16. Experimental study on fatigue strength of super-high strength sucker rod
17. Corrosion and stress corrosion cracking behavior of 316L austenitic steel in high H2S-CO2-Cl-environment10.1007/s10853-013-7168-1 ↗
18. A four-point method for corrosion rate determination10.1016/0010-938X(80)90118-3 ↗
19. Corrosion behaviour of carbon steel in different concentrations of HCl solutions containing H2S at 90°C10.1016/j.corsci.2011.01.041 ↗
20. Determination of effective capacitance and film thickness from constant phase-element parameters10.1016/j.electacta.2009.10.065 ↗
21. On the physical interpretation of constant phase elements10.1016/j.ssi.2009.04.002 ↗
22. Effects of strain on the corrosion behaviour of X80 steel10.1016/j.corsci.2011.05.011 ↗
23. Effects of sulphide ion on the corrosion behavior of X52 steel in a carbon dioxide environment at temperature 4010.1016/j.matchemphys.2011.02.016 ↗
24. Characterizing the effect of carbon steel exposure in sulfide containing solutions to microbially induced corrosion10.1016/j.corsci.2010.11.027 ↗
25. Effect of sulphide on the corrosion behaviour of AISI 316L stainless steel and its constituent elements in simulated Kraft digester conditions10.1016/j.corsci.2009.12.034 ↗
26. A study on the initiation of pitting corrosion in carbon steel in chloride-containing media using scanning electrochemical probe10.1016/j.electacta.2010.06.024 ↗
27. Low alloy X100 pipeline steel corrosion and passivation behavior in bicarbonate-based solutions of pH 6.7 to 8.9 with groundwater anions: an electrochemical study10.1007/s11661-015-2891-7 ↗
28. The influence of ionic composition on the electrodissolution and passivation of iron electrodes in potassium carbonate bicarbonate solutions in the 8.4–10.5 pH range at 25°C10.1016/0010-938X(86)90063-6 ↗