Kinetic variables based constitutive model for high temperature deformation of Ti-46.5Al–2Nb–2Cr
Source abstract
Abstract
The deformation behavior in the isothermal compression of Ti-46.5Al–2Nb–2Cr (at. %) including flow stress and microstructure evolution at the deformation temperatures ranging from 1373 to 1533 K and strain rates from 0.001 to 1 s−1 were investigated. The phenomenological-based model was established by describing the variation of the strain hardening exponent with the increasing of strain. The strain rate sensitivity exponent ranging from 0.065 to 0.449 indicated the transition of deformation mechanism from dislocation creep to grain boundary sliding, and the model by considering the effect of the processing parameters on the strain rate sensitivity was presented. The effect of the processing parameters on the apparent activation energy for deformation was analyzed. Furthermore, the novel constitutive model coupling with the strain hardening exponent and strain rate sensitivity exponent in the deformation was put forward and applied to predict the deformation behavior of Ti-46.5Al–2Nb–2Cr.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. The constitutive equations for FEM analysis10.1016/S0924-0136(00)00635-X ↗
2. Tensile deformation
3. New formula for calculating flow curves from high temperature constitutive data for 300 austenitic steels10.1016/0924-0136(92)90236-L ↗
4. Superplasticity in an Al-Zn alloy
5. A critical review of experimental results and constitutive descriptions for metals and alloys in hot working10.1016/j.matdes.2010.11.048 ↗
6. Zuzin · 1964
7. A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures
8. A practical stress-strain-strain rate-temperature constitutive relation of the power form10.1016/0378-3804(87)90031-3 ↗
9. Approximate analysis of structures in the presence of moderately large creep deformations10.1090/qam/61004 ↗
10. Modelization and comparison of Norton-Hoff and Arrhenius constitutive laws to predict hot tensile behavior of Ti-6Al-4V alloy10.1016/S1003-6326(12)61746-4 ↗
11. Constitutive modeling of high-temperature flow behavior of an Nb micro-alloyed hot stamping steel10.1007/s11665-016-1896-8 ↗
12. Deformation behaviors and microstructure evolution of TiBw/TA15 composite with novel network architecture10.1016/j.jallcom.2017.06.197 ↗
13. On the mechanism of hot deformation
14. Characterization of the high temperature deformation behavior of two intermetallic TiAl-Mo alloys10.1016/j.msea.2015.09.077 ↗
15. Hot-working behavior of an advanced intermetallic multi-phase γ-TiAl based alloy10.1016/j.msea.2014.07.040 ↗
16. Constitutive relationship for high temperature deformation of powder metallurgy Ti-47Al-2Cr-2Nb-0.2W alloy10.1016/j.matdes.2011.12.019 ↗
17. Effect of strain rate upon plastic flow of steel10.1063/1.1707363 ↗
18. Strain rate sensitivity and strain hardening exponent during the isothermal compression of Ti60 alloy10.1016/j.msea.2012.01.021 ↗
19. Characterization of the elevated temperature compressive deformation behavior of high Nb containing TiAl alloys with two microstructures10.1016/j.msea.2018.04.055 ↗
20. The effect of alpha platelet thickness on plastic flow during hot working of Ti-6Al-4V with a transformed microstructure10.1016/S1359-6454(01)00236-1 ↗
21. A promising microstructure/deformability adjustment of β-stabilized γ-TiAl10.1016/j.matlet.2015.09.139 ↗
22. Wrought TiAl blades10.1016/j.matpr.2015.05.024 ↗
23. Review of alloy and process development of TiAl alloys10.1016/j.intermet.2005.10.019 ↗
24. Advances in gamma titanium aluminides and their manufacturing techniques10.1016/j.paerosci.2012.04.001 ↗
25. High temperature deformability and microstructural evolution of Ti-47Al-2Cr-0.2 Mo alloy10.1016/j.jallcom.2010.06.124 ↗
26. Analysis of high temperature deformation behavior of a high Nb containing TiAl based alloy10.1016/j.matlet.2008.05.071 ↗
27. High temperature deformation of Ti-(46-48)Al-2W intermetallic compounds10.1016/S0921-5093(98)00614-5 ↗
28. Characterization of hot processing parameters of powder metallurgy TiAl-based alloy based on the activation energy map and processing map10.1016/j.matdes.2015.07.140 ↗
29. Positive influence of hydrogen on the hot workability and dynamic recrystallization of a γ-TiAl based alloy10.1016/j.msea.2016.01.001 ↗
30. Dislocation dynamics10.1016/0025-5416(68)90029-3 ↗
31. Dynamic softening behavior and microstructural characterization of TiAl-based alloy during hot deformation10.1016/j.matchar.2017.05.022 ↗
32. Variation of true strain-rate sensitivity exponent as a function of plastic strain in the PM processed superplastic 7475Al+0.7Zr alloy10.1016/S0921-5093(99)00552-3 ↗
33. Dynamic recrystallization behavior of an as-cast TiAl alloy during hot compression10.1016/j.matchar.2014.09.013 ↗
34. High temperature deformation behavior and microstructural evolution of Ti-47Al-2Cr-4Nb intermetallic alloys10.1016/S1359-6462(98)00072-4 ↗
35. High temperature mechanical properties of a submicrocrystalline Ti-47Al-3Cr alloy produced by mechanical alloying and hot isostatic pressing10.1016/S0925-8388(00)01167-1 ↗
36. Microstructure and mechanical properties of a forged β-solidifying γ TiAl alloy in different heat treatment conditions10.1016/j.intermet.2014.11.008 ↗
37. Hot deformation behavior and processing maps of B and Gd containing β-solidified TiAl based alloy10.1016/j.intermet.2018.01.004 ↗
38. Recrystallization of coherent nanolamellar structures in Ti48Al2Cr2Nb intermetallic alloy10.1016/j.actamat.2015.10.049 ↗
39. Flow behavior and microstructure evolution of a P/M TiAl alloy during high temperature deformation10.1016/j.msea.2011.05.071 ↗
40. Superplasticity and hot rolling of two-phase intermetallic alloy based on TiAl10.1016/1359-6462(95)00604-4 ↗
41. Influence of strain rate and temperature on the deformation mechanisms of a fine-grained Ti-6Al-4V alloy10.1016/j.msea.2020.139718 ↗
42. Characterization of hot deformation behavior of a Ni-base superalloy using processing map10.1016/j.matdes.2008.05.006 ↗
43. Sun · 2009
44. Processing map and hot working mechanisms in a P/M TiAl alloy composite with in situ carbide and silicide dispersions10.1016/j.msea.2010.06.064 ↗
45. Diffusion in the Ti-Al system10.1016/S1359-6454(99)00400-0 ↗