Mechanical degradation of magnetic pulse welded Al–Fe joint in neutral salt environment
Source abstract
Abstract
The urgent need in lightweight of vehicle body promoted the application of multi materials with high specific strength, and this involves the reliable welding of dissimilar materials. In this study, AA5052 aluminum alloy and HC420LA steel were welded by magnetic pulse welding. The mechanical degradation of the dissimilar Al–Fe joint after different salt spray corrosion duration was investigated. The atomic force microscopy-scanning Kelvin probe force microscopy (AFM-SKPFM) and immersion tests were also performed. The fracture of the Al–Fe joint was observed by optical microscopy, scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). The ultimate shear strength of the Al–Fe joint only declines for 10% after three weeks' corrosion. Crevice corrosion is found in the overlapping region, and galvanic corrosion and stress corrosion occur in the weld region. The corrosion in the flat welding interface is mainly galvanic corrosion due to the high corrosion driving force, while the corrosion in the wave welding interface is mainly stress corrosion.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Technical and environmental evaluation of a new high performance material based on magnesium alloy reinforced with submicrometre-sized TiC particles to develop automotive lightweight components and make transport sector more sustainable10.1016/j.jmrt.2019.02.012 ↗
2. Effect of intermetallic compound on the Al-Mg composite materials fabricated by mechanical ball milling and spark plasma sintering10.1016/j.jallcom.2017.12.054 ↗
3. Influence of dwell time on microstructure evolution and mechanical properties of dissimilar friction stir spot welded aluminum–copper metals10.1016/j.jmrt.2019.02.015 ↗
4. Effects of process parameters on mechanical performance and interfacial morphology of electromagnetic pulse welded joints between aluminum and galvanized steel10.1016/j.jmrt.2020.12.047 ↗
5. Investigation of the joint length of weldment of environmental-friendly magnetic pulse welding process10.1007/s00170-016-8634-0 ↗
6. Electromagnetic pulse spot welding of aluminum to stainless steel sheets with a field shaper10.1007/s00170-018-2208-2 ↗
7. Interfacial microstructure and local bonding strength of magnetic pulse welding joint between commercially pure aluminum 1060 and AISI 304 stainless steel10.1016/j.jmapro.2019.07.041 ↗
8. Investigation of collision surfaces and weld interface in magnetic pulse welding of dissimilar Al/Cu sheets10.1016/j.jmapro.2019.07.012 ↗
9. The effect of temperature on microstructure and mechanical properties of Al/Mg lap joints manufactured by magnetic pulse welding10.1016/j.jmrt.2019.05.017 ↗
10. Strain rate sensitivity of Al-Fe magnetic pulse welds10.1016/j.jmatprotec.2018.06.021 ↗
11. Microstructure, local mechanical properties and stress corrosion cracking susceptibility of an SA508-52M-316LN safe-end dissimilar metal weld joint by GTAW10.1016/j.msea.2016.05.101 ↗
12. Corrosion behavior of metal–composite hybrid joints: influence of precipitation state and bonding zones10.1016/j.corsci.2019.07.002 ↗
13. Study of mechanical joint strength of aluminum alloy 7075-T6 and dual phase steel 980 welded by friction bit joining and weld-bonding under corrosion medium10.1016/j.matdes.2014.12.043 ↗
14. Marine atmospheric corrosion of Al-Mg joints by friction stir blind riveting10.1016/j.corsci.2016.05.009 ↗
15. Corrosion behavior and failure mechanism of electromagnetic pulse welded joints between galvanized steel and aluminum alloy sheets10.1016/j.jmapro.2021.02.039 ↗
16. Microstructural evaluation of magnetic pulse welded plain carbon steel sheets10.1016/j.jmatprotec.2017.11.012 ↗
17. Interfacial microstructure characterization of aluminum/aluminum-lithium joints fabricated by magnetic pulse welding10.1016/j.matchar.2020.110530 ↗
18. Electromagnetic pulse welding of Al/Cu dissimilar materials: microstructure and tensile properties10.1016/j.msea.2020.139842 ↗
19. 2012
20. Characterization of atmospheric corrosion in Al/Ag lap joints10.1016/j.corsci.2008.08.014 ↗
21. Corrosion properties of laser beam joints of aluminium with zinc-coated steel10.1016/j.corsci.2007.04.014 ↗
22. Microstructures and mechanical properties of the welded AA5182/HC340LA joint by magnetic pulse welding10.1016/j.matchar.2018.02.018 ↗
23. An anomalous wave formation at the Al/Cu interface during magnetic pulse welding10.1063/5.0005299 ↗
24. Magnetic pulse welding: interface of Al/Cu joint and investigation of intermetallic formation effect on the weld features10.1016/j.jmapro.2014.05.002 ↗
25. Establishing a correlation between interfacial microstructures and corrosion initiation sites in Al/Cu joints by SEM–EDS and AFM–SKPFM10.1016/j.corsci.2013.10.039 ↗
26. As cast microstructures on the mechanical and corrosion behaviour of ZK40 modified with Gd and Nd additions10.1016/j.msea.2016.11.022 ↗
27. Investigation of residual stresses in planar dissimilar magnetic pulse welds by neutron diffraction10.1016/j.jmapro.2021.06.071 ↗
28. High cooling rates and metastable phases at the interfaces of explosively welded materials10.1016/j.actamat.2017.06.038 ↗