Effect of carbon on the microstructure and sliding wear performance of CoCrMo matrix composites from room temperature to 1000 °C
Source abstract
Abstract
This work aimed to fabricate the CoCrMo matrix composites with different carbon contents, and the carbon content was optimized to achieve the good mechanical and tribological properties from room temperature to 1000 °C. Four composites containing different carbon content (0, 0.3 wt.%, 0.6 wt.% and 1 wt.%) were fabricated by powder metallurgy technology. Microstructure and tribological properties were studied. Friction behaviors were conducted on a disc-on-ball tribotester rubbing against Si3N4 ball. The carbon greatly improved the wear resistance of CoCrMo matrix composites due to the strengthening effect of carbides (Cr7C3 and Mo3Co3C) and the dense oxides film. However, the friction coefficient slightly increased. There was a critical value of carbon content for hardness and high-temperature friction and wear behaviors. The composite with 0.6 wt.% carbon had the most favorable tribological behaviors from RT to 1000 °C. Four composites showed different friction mechanisms.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced materials and composites · Metal and Thin Film Mechanics · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Characterization of wear particles generated from CoCrMo alloy under sliding wear conditions10.1016/j.wear.2010.12.045 ↗
2. Effect of heat treatment on the hardness and wear resistance of electrodeposited Co-B alloy coatings10.1016/j.jmrt.2018.07.007 ↗
3. Mechanical and wear behaviour of nanostructure TiO2–Ag coating on cobalt chromium alloys by air plasma spray and high velocity oxy-fuel10.1016/j.jmrt.2019.04.003 ↗
4. Effect of nano-yttria addition on the properties of WC/Co composites10.1016/j.matdes.2013.05.034 ↗
5. Effect of molybdenum on the microstructure and wear resistance of cobalt-base Stellite hardfacing alloys10.1016/S0257-8972(02)00853-8 ↗
6. Tribological behavior of borided surface on CoCrMo cast alloy10.1016/j.wear.2019.02.006 ↗
7. Deformation-induced phase transformation in a Co-Cr-W-Mo alloy studied by high-energy X-ray diffraction during in-situ compression tests10.1016/j.actamat.2018.10.035 ↗
8. Corrosion fatigue failure of a high carbon CoCrMo modular hip prosthesis: failure analysis and electrochemical study10.1016/j.engfailanal.2019.07.044 ↗
9. Effects of carbon addition on wear mechanisms of CoCrMo metal-on-metal hip joint bearings10.1016/j.msec.2017.03.211 ↗
10. ASM Handbook Committee · 2000
11. Novel wear-resistant materials-Carbon fiber reinforced low-carbon Stellite alloy composites10.1016/j.compositesa.2011.11.023 ↗
12. Tribological and high-temperature mechanical characterization of cold sprayed and PTA-deposited Stellite coatings10.1016/j.surfcoat.2019.04.032 ↗
13. Wear and corrosion performance of laser-clad low-carbon high molybdenum Stellite alloys10.1016/j.optlastec.2018.05.021 ↗
14. High temperature sliding wear behaviour of Inconel 617 and Stellite 6 alloys10.1016/j.wear.2010.07.005 ↗
15. Laser surface melting of 10 wt% Mo alloyed hardfacing Stellite 12 plasma transferred arc deposits: structural evolution and high temperature wear performance10.1016/j.optlastec.2017.11.038 ↗
16. High-temperature sliding wear behaviour of Stellite® 12 and Tribaloy® T400.10.1016/j.wear.2018.02.013 ↗
17. High temperature solid-lubricating materials: a review10.1016/j.triboint.2018.12.037 ↗
18. Effects of yttrium on microstructure, mechanical properties and high-temperature wear behavior of cast Stellite 6 alloy10.1016/S0043-1648(03)00057-7 ↗
19. Investigation of the role of oxide scale on Stellite 21 modified with yttrium in resisting wear at elevated temperatures10.1016/j.wear.2005.01.022 ↗
20. Microstructural evolution and wear behaviors of laser-clad Stellite 6/NbC/h-BN self-lubricating coatings10.1016/j.surfcoat.2019.04.083 ↗
21. Microstructure and mechanical properties investigation of stellite 6 and Stellite 6/TiC coating on ASTM A105 steel produced by TIG welding process10.1016/j.surfcoat.2018.07.044 ↗
22. High temperature wear resistance and thermal fatigue behavior of Stellite-6/WC coatings produced by laser cladding with Co-coated WC powder10.1016/j.ijrmhm.2019.02.024 ↗
23. Microstructure and dry sliding wear behavior of ultrafine-grained Co-30 at% Cr alloy at room and elevated temperatures10.1016/j.jallcom.2018.08.092 ↗
24. Secondary M6C precipitation in a cobalt-base superalloy10.1023/A:1006627122234 ↗
25. High-temperature wear behavior of self-lubricating Co matrix alloys prepared by P/M10.1016/j.wear.2015.11.009 ↗
26. Wear and friction of TiAlN/VN coatings against Al2O3 in air at room and elevated temperatures10.1016/j.actamat.2010.01.020 ↗
27. Effect of alumina dispersion on oxidation behavior as well as friction and wear behavior of HVOF-sprayed CoCrAlYTaCSi coating at elevated temperature up to 1000 °C10.1016/j.actamat.2015.05.025 ↗