Phase-field simulation of effects of normal strain on the morphology and kinetics evolution of nanoscale phase
Source abstract
Abstract
This is the first investigation on the morphology and kinetics evolution of nanoscale precipitates under normal strain with the three-dimensional phase-field simulation. The volume fraction, particle number density and average particle radius of the precipitates are clarified for uniaxial, biaxial and triaxial strain, combining the free energy and shape change of nanoscale precipitates. For the anisotropic elasticity, uniaxial, biaxial and triaxial strain promote phase decomposition compared with strain-free state, except that triaxial compressive strain retards the early-stage precipitation. Nanoscale precipitates under mixed biaxial or triaxial strain display strip-like shape, especially for the biaxial tensile with uniaxial compressive strain. Triaxial tensile and compressive strain do not change the shape of precipitates, while the particle size is reduced under triaxial compressive strain. The results demonstrate that normal strain affects the morphology and kinetics of the nanoscale phase to different degrees.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Facile synthesis of Nd2Sn2O7-SnO2 nanostructures by novel and environment-friendly approach for the photo degradation and removal of organic pollutants in water10.1016/j.jenvman.2018.12.011 ↗
2. Preparation of lignin nanoparticles from wood waste for wood surface treatment10.3390/nano9020281 ↗
3. Facile fabrication of Dy2Sn2O7-SnO2 nanocomposites as an effective photocatalyst for degradation and removal of organic contaminants10.1016/j.jcis.2017.03.031 ↗
4. Morphology-controlled Au nanostructures for efficient and selective electrochemical CO2 reduction10.1039/C8TA01010B ↗
5. Eco-friendly synthesis of Nd2Sn2O7-based nanostructure materials using grape juice as green fuel as photocatalyst for the degradation of erythrosine10.1016/j.compositesb.2019.03.045 ↗
6. 400℃ aging embrittlement of FeCrAl alloys: microstructure and fracture behavior10.1016/j.msea.2018.11.084 ↗
7. Experimental observations of stress-driven grain boundary migration10.1126/science.1178226 ↗
8. Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy10.1016/j.actamat.2016.07.038 ↗
9. Rafting of γ′ precipitates in a Co-9Al-9W superalloy during compressive creep10.1016/j.msea.2018.02.017 ↗
10. Phase-field simulation of rafting kinetics in a nickel-based single crystal superalloy10.1016/j.intermet.2017.02.017 ↗
11. Tuning hardness and fracture resistance of ZrN/Zr0.63Al0.37 Nnanoscale multilayers by stress-induced transformation toughening10.1016/j.actamat.2015.01.066 ↗
12. Hot tensile properties and strain hardening behaviour of Super 304HCu stainless steel10.1016/j.jmrt.2016.05.004 ↗
13. Photostress analysis of stress-induced martensite phase transformation in superelasticNiTi10.1016/j.msea.2017.01.111 ↗
14. The effect of uniaxial stress on the morphology of coherent gamma prime precipitates in stress annealed Nickel-base superalloy crystals10.1007/BF02662660 ↗
15. Effects of stress coarsening on coherent particle strengthening10.1007/BF02643227 ↗
16. Diffuse-interface description of strain-dominated morphology of critical nuclei in phase transformations10.1016/j.actamat.2008.03.043 ↗
17. Coarsening of γ′ in Ni-Al alloys aged under uniaxial compression: II. Diffusion under stress and retardation of coarsening kinetics10.1016/S1359-6454(03)00327-6 ↗
18. Morphology and kinetics evolution of nanoscale phase in Fe-Cr alloys under external strain10.3390/nano9020294 ↗
19. Effect of applied strain on phase separation of Fe–28 at.% Cr alloy: 3D phase-field simulatoin10.1088/1361-651X/aab057 ↗
20. Deformation behavior of Al–Cu–Mn alloy sheets under biaxial stress at cryogenic temperatures10.1016/j.msea.2019.05.047 ↗
21. Deformation and damage failure behavior of mudstone specimens under single-stage and multi-stage triaxial compression10.1007/s00603-018-1622-y ↗
22. Diffuse interface model of diffusion-limited crystal growth10.1103/PhysRevB.31.6119 ↗
23. Phase-field formulation for quantitative modeling of alloy solidification10.1103/PhysRevLett.87.115701 ↗
24. Directional coarsening in Ni-base superalloys: analytical results for an elasticity based model10.1098/rspa.1999.0441 ↗
25. Modeling of microstructure changes in Fe-Cr-Co magnetic alloy using the phase-field method10.1361/105497106X92763 ↗
26. Phase separation by spinodal decomposition in isotropic system10.1063/1.1695731 ↗
27. Free energy of a non-uniform system. I. Interfacial free energy10.1063/1.1744102 ↗
28. Correlation between CALPHAD data and the Cahn-Hilliard gradient energy coefficient κ and exploration into its composition dependence10.1016/j.calphad.2005.11.002 ↗
29. Modeling of precipitation kinetics in multicomponent systems: application to model superalloys10.1016/j.actamat.2015.08.041 ↗
30. Thermodynamic properties of the Cr-Fe system10.1016/0364-5916(87)90021-6 ↗
31. SGTE data for pure elements10.1016/0364-5916(91)90030-N ↗
32. The thermodynamic properties and equilibrium diagram of the system Cr-Fe
33. Preparation of magnetically retrievable CoFe2O4@SiO2@Dy2Ce2O7 nanocomposites as novel photocatalyst for highly efficient degradation of organic contaminants10.1016/j.compositesb.2019.106930 ↗
34. Microstructure and high-temperature strength of monocrystalline nickel-base superalloys10.1002/1527-2648(200006)2:6<319::AID-ADEM319>3.0.CO;2-S ↗
35. Elastic strain energy of inhomogeneous solids10.1103/PhysRevB.52.15909 ↗
36. Khachaturyan · 1983
37. Spinodal decomposition in Fe-Cr alloys: experimental study at the atomic level and comparison with computer models-I. Introduction and methodology10.1016/0956-7151(95)00040-3 ↗
38. Phase equilibria and thermodynamic properties in the Fe‒Cr system10.1080/10408431003788472 ↗
39. Applications of semi-implicit Fourier-spectral method to phase fifield equations10.1016/S0010-4655(97)00115-X ↗
40. Phase decomposition and morphology characteristic in thermal aging Fe–Cr alloys under applied strain: a phase-field simulation10.1016/j.jnucmat.2012.05.026 ↗
41. Effect of dislocations on spinodal decomposition in Fe–Cr alloys10.1016/j.jnucmat.2009.10.042 ↗
42. Phase field study of precipitate rafting under a uniaxial stress10.1016/j.actamat.2007.05.021 ↗
43. Modeling of phase seperation in alloy with coherent elastic misfit10.1023/A:1004587425006 ↗
44. Self-similarity and growth kinetics driven by surface free energy reduction10.1016/0001-6160(89)90096-5 ↗
45. Modeling the microstructural evolution of Ni-based superalloys by phase field method combined with CALPHAD and CVM10.1016/j.commatsci.2006.10.014 ↗
46. Influence of uniaxial stess on the morphology of coherent precipitates during coarsening–elastic energy considerations10.1016/0001-6160(76)90101-2 ↗
47. Continuum separation of nanoscale phase in thermal aging Fe-Cr alloys: Phase-field simulation and experiment10.1007/s11837-019-03399-7 ↗
48. Coarsening of γ′ in Ni–Al alloys aged under uniaxial compression: I. Early-stage kinetics10.1016/S1359-6454(03)00329-X ↗
49. A simple model for coherent equilibrium10.1016/0001-6160(84)90173-1 ↗
50. On spinodal decomposition10.1016/0001-6160(61)90182-1 ↗
51. Phase relation and microstructure in multi-phase intermetallic alloys based on Ni3Al-Ni3Ti-Ni3V pseudo-ternary alloy system10.1016/j.intermet.2003.12.011 ↗