On the pitting resistance of friction stir welded UNS S82441 lean duplex stainless steel
Source abstract
Abstract
Friction stir welding has been considered as an alternative to fusion welding processes of stainless steels. A lean duplex stainless steel, grade UNS S82441, has been recently developed and is prone to localized corrosion, such as pitting when exposed to harsh conditions during use. However, pitting resistance of UNS S82441 has not been previously investigated. In this study, UNS S82441 lean duplex stainless steel was friction stir welded, and its microstructure and localized corrosion resistance were investigated by phase volumetric fraction, scanning electron microscopy, transmission electron microscopy and electrochemical tests. The pitting resistance of each zone was investigated by polarization tests and by determining the critical pitting temperature. The results indicated that microstructural changes promoted by friction stir welding affected the pitting resistance of the lean duplex stainless steel.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Failure of a super duplex stainless steel reaction vessel10.1016/j.engfailanal.2003.05.011 ↗
2. Effect of intermetallic phases on corrosion behaviour and mechanical properties of duplex stainless steel and super-duplex stainless steel10.12913/22998624/59090 ↗
3. Effect of intermetallic precipitations on the properties of duplex stainless steel10.1016/j.matchar.2006.03.015 ↗
4. Sigma phase precipitation in duplex stainless steel 220510.1016/j.msea.2006.08.107 ↗
5. Microstructure and mechanical properties of friction stir welded lean duplex stainless steel10.1016/j.msea.2012.10.068 ↗
6. Influence of interpass temperature on the properties of duplex stainless steel during welding by the submerged arc welding process10.1590/0104-9224/SI1902.03 ↗
7. Borsato · 2001
8. The effect of cooling rate on the mechanical and corrosion properties of SAF 2205 (UNS 31803) duplex stainless steel welds10.1016/S1359-6462(00)00613-8 ↗
9. Effect of the welding heat input on the microstructure and mechanical properties of the heat affected zone of multi-pass welded joints of duplex stainless steel10.1590/S0104-92242011000300004 ↗
10. Evaluation of multipass welding of thick lean duplex stainless steel UNS S32304 plates welded by SMAW. GMAW and FCAW – Part II – corrosion resistance10.1590/S0104-92242013000300008 ↗
11. Annealing temperature effect on the pitting corrosion resistance of plasma arc welded joints of duplex stainless steel UNS S32304 in 1.0M NaCl10.1016/j.corsci.2011.02.041 ↗
12. Influence of cooling rate on microstructure evolution and pitting corrosion resistance in the simulated heat-affected zone of 2304 duplex stainless sheets of steel10.1016/j.corsci.2012.01.018 ↗
13. Thomas · 1995 · 19
14. Gunn · 1997
15. Duplex stainless steels: a brief history and some recent alloys10.2174/2212797610801010051 ↗
16. The effect of phase compositions on the pitting corrosion of 25 Cr duplex stainless steel in chloride solutions10.1016/0010-938X(96)00022-4 ↗
17. Corrosion resistance of super duplex stainless steels in chloride ion containing environments: investigations by means of a new microelectrochemical method I. Precipitation-free states10.1016/S0010-938X(00)00087-1 ↗
18. Effect of friction stir welding speed on the microstructure and mechanical properties of duplex stainless steel10.1016/j.msea.2008.05.025 ↗
19. Friction stir welding of the duplex and super duplex stainless steels and some aspects of microstructural characterization and mechanical performance10.1590/1980-5373-MR-2015-0319 ↗
20. Microstructural and electrochemical characterization of friction stir welded duplex stainless steels10.1016/S1452-3981(23)07983-X ↗
21. Corrosion behaviour of friction stir welded lean duplex stainless steel10.1016/j.matdes.2014.10.060 ↗
22. Rapid formation of the sigma phase in 304 stainless steel during friction stir welding10.1016/j.scriptamat.2004.04.001 ↗
23. Pitting corrosion of welded joints of austenitic stainless steels studied by using an electrochemical minicell10.1016/j.corsci.2007.11.028 ↗
24. Effect of prolonged thermal cycles on the pitting corrosion resistance of a newly developed LDX 2404 lean duplex stainless steel10.1016/j.corsci.2015.11.018 ↗
25. Properties of the new duplex grade LDX 2404®
26. Effect of aging time on intergranular corrosion behaviour of a newly developed LDX 2404 lean duplex stainless steel10.1016/j.jallcom.2016.02.101 ↗
27. Outukumpu Grade Data Sheet LDX 2402.
28. “Standard test methods for detecting detrimental intermetallic phase in duplex austenitic/ferritic stainless steels,” ASTM A923-14, in Annual Book of ASTM Standards, vol. 01.03.
29. “Standard guide for quantitative analysis by energy-dispersive spectroscopy,” ASTM E1508-12, in Annual Book of ASTM Standards, vol. 03.01.
30. Understanding why PREN alone cannot be used to select duplex stainless steels
31. Wolynec · 2003
32. “Standard test method for electrochemical critical pitting temperature testing of stainless steels,” ASTM G150-13, in Annual Book of ASTM Standards, vol. 03.02.
33. Determining the potential independent critical pitting temperature (CPT) by a potentiostatic method using the Avesta cell
34. Friction stir welding of duplex stainless steels
35. UNS S82441 – a new duplex stainless steel grade for the process industries
36. Reverse strain-induced martensitic transformation of the ferrite to austenite in duplex stainless steels10.1007/s10853-016-0265-1 ↗
37. Determination of critical pitting temperatures using electrochemical noise
38. Effect of temperature and Cl-concentration on pitting of 2205 duplex stainless steel10.1007/s11595-011-0283-4 ↗
39. Critical pitting and repassivation temperatures for duplex stainless steel in chloride solutions10.1016/j.electacta.2008.02.047 ↗
40. Critical pitting temperature dependence of 2205 duplex stainless steel on dichromate ion concentration in chloride medium10.1016/j.corsci.2010.12.019 ↗
41. Critical pitting temperature (CPT) assessment of 2205 duplex stainless steel in 0.1M NaCl at various molybdate concentrations10.1016/j.corsci.2010.08.008 ↗
42. Pitting corrosion of welds in UNS S32304 lean duplex stainless steel
43. Effect of nickel and nitrogen on microstructure and corrosion resistance of duplex stainless steel weldment10.2207/qjjws.7.94 ↗
44. Effect of nitrogen on corrosion behavior of the 28Cr–7Ni duplex and micro duplex stainless steels in air-saturated 3.5wt% NaCl solution10.1016/j.corsci.2004.11.017 ↗