Impact of solid-solution treatment on microstructural characteristics and formability of rotary-swaged 2024 alloy tubes
Source abstract
Abstract
Rotary swaging is a process usually applied to reduce the entire or local diameter and size of rods and tubes. In this study, the effects of the rotary swaging process and subsequent softening heat treatments, namely full annealing and solid-solution treatment, are investigated. The results show that rotary swaging refines grain size, decreases the eutectic phase fraction, enhances mechanical strength, and decreases mechanical elongation. Solid-solution treatment enhances work hardening ability and improves uniform elongation, and is thus more suitable for enhancing the formability of rotary-swaged alloys. The factors that affect microstructural characteristics and mechanical properties are discussed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Advanced materials and composites · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Severe plastic deformation of commercial purity aluminum by rotary swaging: microstructure evolution and mechanical properties10.1016/j.msea.2012.12.046 ↗
2. Modern applications of radial forging and swaging in the automotive industry10.1016/0924-0136(92)90328-P ↗
3. Application of stochastic regression for the configuration of microrotary swaging processes10.1155/2014/360862 ↗
4. Rotary swaging forming process of tube workpieces10.1016/j.proeng.2014.10.330 ↗
5. Microstructures and mechanical properties of pure Mg processed by rotary swaging10.1016/j.matdes.2014.05.057 ↗
6. Improvement of mechanical and electrical properties of rotary swaged Al–Cu clad composites10.1016/j.matdes.2017.03.048 ↗
7. Warm hydroformability and mechanical properties of pre- and post-heat treated Al6061 tubes10.4028/www.scientific.net/AMR.29-30.87 ↗
8. Effect of the heat treatment on the hot deformation behaviour of AA6082 alloy10.1016/j.jmatprotec.2004.04.091 ↗
9. Recent magnesium alloy development for elevate temperature applications10.1179/095066004225010497 ↗
10. Work hardening of ultrafine-grained copper with nanoscale twins10.1016/j.scriptamat.2007.03.029 ↗
11. Strain hardening and alrge tensile elongation in ultrahigh-strength nano-twinned copper10.1063/1.1814431 ↗
12. Simultaneously increasing the ductility and strength of nanostructured alloys10.1002/adma.200600310 ↗
13. Work hardening effect of Mg-based nano-composites strengthened by Al2O3 nano-particles10.1016/j.msea.2012.12.083 ↗
14. Strong strain hardening ability in an as-cast Mg–3Al–3Sn alloy10.1016/j.matchemphys.2011.12.036 ↗
15. Strong strain hardening ability in an as-cast Mg–3Sn–1Zn alloy10.1016/j.matlet.2012.12.001 ↗
16. Hatch · 1984 · vol. 1 · 152
17. Effects of rotary swaging process on microstructure and mechanical properties of 2024 aluminum tubes
18. Excellent room-temperature ductility and formability in an Mg–Al–Zn alloy at moderate temperatures10.1016/j.scriptamat.2006.07.013 ↗
19. Development of a new wrought magnesium–aluminum–manganese alloy AM3010.1007/s11661-007-9129-2 ↗
20. Measurement of strain hardening exponent n-value by additional rolling strain for aluminum alloy sheets10.2464/jilm.59.195 ↗
21. Work hardening in rolled nanolayered metallic composites10.1016/j.actamat.2004.09.018 ↗
22. Effect of actual and accelerated ageing on microstructure evolution and mechanical properties of a 2024-T351 aluminum alloy10.1016/j.ijfatigue.2017.10.015 ↗
23. Precipitation processes during non-isothermal ageing of fine-grained 2024 alloy10.1515/amm-2016-0030 ↗
24. Investigating the effects of bulk and surface severe plastic deformation on the fatigue, corrosion behaviour and corrosion fatigue of AA508310.1016/j.surfcoat.2014.06.026 ↗
25. Effect of swaging on microstructure and tensile properties of W–Ni–Fe alloys10.1016/j.ijrmhm.2013.08.013 ↗
26. Low-temperature dynamic precipitation in a supersaturated Al–Zn–Mg alloy and related strain hardening10.1080/01418619908214295 ↗
27. Examination of the tensile deformation resistance and ductility of fraction stir processed Al–Cu 2218 alloy at elevated temperatures10.2320/matertrans.M2010111 ↗
28. A model for the portevin-le chatelier effect in substitutional alloys10.1016/0001-6160(72)90028-4 ↗
29. The effect of precipitation hardening on the portevin-le chatelier effect in an Al–Mg–Si alloy10.1016/0001-6160(77)90121-3 ↗
30. Dynamic strain aging in aluminum alloys10.1016/0025-5416(74)90177-3 ↗
31. Effect of pre-ageing on dynamic strain ageing in Al–Mg–Si alloys10.1016/j.msea.2017.01.051 ↗
32. Microstructural variation and tensile properties of a cast 5083 aluminum plate via friction stir processing10.2320/matertrans.M2009049 ↗
33. Revisit the role of deformation twins on the work-hardening behaviour of twinning-induced plasticity steels10.1016/j.scriptamat.2017.08.017 ↗