Microstructural Degradation of Boiler Tubes Due to the Presence of Internal Oxide Layer
Source abstract
Abstract
Overheating due to the formation of the internal oxide layer has a large influence on the life of boiler components. The aim of this study consisted in assessing the effect of the internal oxide layer on the microstructural degradation in boiler tubes. Three samples of 2.25 Cr-1Mo superheater steel tubes were used. The methodology of the study compared the microstructures of the samples received by optical, scanning electron, and transmission electron microscopy. Tensile and hardness tests were performed. At the end of the tests it was proved the deleterious effect of the internal oxide layer on the life of the component. From the measurements of the internal oxide thickness, the remaining lives of the pipes operating under creep regime were estimated with a methodology established in the literature.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Nuclear Materials and Properties · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (9)
Show source-provided references
1. 2002 · 11
2. The oxidation of boiler tubes
3. Mechanisms of oxidation and the influence of steam oxidation on service life of power plant components
4. DIN – Deutsches Institut für Normung. Seamless Tubes of Heatresistant Steels, DIN 17175, 1979.
5. Furtado HC. Avaliação de danos em aços ferríticos Cr-Mo operando em regime de fluência. [Tese de Doutorado] Rio de Janeiro: COPPE/UFRJ, 2004.
6. Toft · 1961
7. THe early STAGes of tempering in a 3Cr-1.5Mo steel10.1016/0036-9748(86)90140-7 ↗
8. Paterson SR, Retting TW. Remaining life Assessment of superheater and reheater tubes. EPRI Report CS-5564, Palo Alto, California, EPRI, 1988.
9. Evolution of carbide precipitates in 2. 25Cr-1Mo steel during long-term service in a power plant10.1007/s11661-010-0194-6 ↗