Temporary Direct Bonding by Low Temperature Deposited SiO₂ for Chiplet Applications

High Resolution Image Download MS PowerPoint Slide Die-to-wafer hybrid bonding is a crucial technology in advanced chiplet integration systems. Temporary die bonding on wafers and subsequent debonding are key aspects of this process. However, conventional polymer-based temporary bonding techniques involve several challenges such as issues related to the accurate placement of the die. Although direct bonding is a promising technology, such processes normally involve permanent bonds. The present study demonstrates an innovative temporary bonding method based on plasma-activated direct bonding and examines the associated bonding/debonding mechanisms. In this work, a dielectric bonding film was deposited at a relatively low temperature by chemical vapor deposition. This method offers several advantages, including high alignment accuracy, limited risk of die shift, and cost reduction based on removal of the carrier wafer grinding process. Wafer bonding was performed with SiO 2 films deposited at low temperatures, and voids were formed at the bonding interfaces during postbond annealing. The bonding energy was sufficiently low even after annealing to allow wafer pairs to be released as a consequence of voids serving as initiation points for debonding. Desorption gas analysis established that the SiO 2 films absorbed significant moisture from ambient air, which was the root cause of void formation. Die-to-wafer bonding tests confirmed the formation of voids at the bonding interfaces. This dielectric is likely to have applications as a temporary bonding material in chiplet integration systems.